Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across San Antonio
If you own a home in San Antonio built before about 1960, you already know the problem: the window opening in the wall does not match any stock unit made today. San Antonio Window Replacement typically runs $900-$2,400 per opening when rough-opening modifications are included, and most jobs take one to two days per opening once materials arrive. We measure every opening twice, quote the real numbers on paper, and register both warranty layers in writing before the truck leaves your driveway. Call (754) 238-2201 and we’ll send a background-checked, uniformed technician to your home in San Antonio with a tape measure and a straight answer. That last part matters here more than in most towns.
Why TruePane Windows & Doors Is San Antonio’s Preferred Custom Windows & Doors Company
We have spent years going in and out of Pasco County’s older wood-frame homes, and San Antonio’s historic core is the most instructive patch of ground we work in. The town was founded by Belgian Catholic immigrants in 1881, and a lot of the housing stock still standing near the original grid was framed before World War II. Those homes have window openings that were framed by hand, one at a time, to whatever the carpenter had on the truck that day. You cannot walk into a supply house and buy a stock window that fits one of those openings. You need a crew that knows how to modify a rough opening without wrecking the lath and plaster around it, and that is exactly what our Custom Windows & Doors team does every week within a half hour of San Antonio.
We’re not new to this. Dale Kessler founded Custom Windows & Doors in San Antonio work on a simple rule that still hangs on the shop whiteboard: if the pane is not true, the job is not done. That rule covers everything we touch, from a single replacement sash in a 1920s cottage to an oversized glass panel in a new build south of town. We register both manufacturer warranty layers in writing before we leave, and every job carries the Done Right Promise. If it is not done right, we make it right. No paperwork fight, no fine print, no arguing.
San Antonio homeowners have called us enough times over the years that we know the blocks around St. Anthony of Padua Catholic Church, the side streets off Curley Road, and the rural parcels out toward Darby where the old farmhouses sit. We know which homes still have their original single-pane sashes. We know which ones have had a handyman pop in a big-box replacement that leaks air around the new jamb. And we know what Pasco County’s building inspectors will flag when a permit gets pulled on an older structure. That local knowledge is not marketing. It is the difference between a quote that holds and a quote that blows up two days into demo.
- Live person answers 24/7 - not a voicemail tree, not a callback form. You call, a human picks up.
- Background-checked, uniformed technicians - working in your San Antonio home the way they’d work in their own mother’s.
- Free estimates and written line-item quotes - the price on the paper is the price on the bill.
- Done Right Promise - if it’s not done right, we make it right. In writing.
Our Custom Windows & Doors Services in San Antonio
Custom work in San Antonio usually starts with one of four conversations. All four begin the same way: you tell us the opening, we measure the opening, and then we tell you the truth about what the opening needs. That truth is sometimes uncomfortable. It is always cheaper to hear before the old window is in the dumpster.
Custom Shape Windows
San Antonio’s older homes have arched transoms, round attic vents, and oddball trapezoid openings that no catalog covers. We fabricate and install custom shape windows for arched, round, triangular, hexagon, and eyebrow openings. In the historic blocks near the town center, these are often the signature feature of the house, and they are the first thing a handyman installs wrong. We cut to the actual measured arc, not the circle the manufacturer thinks your wall should be.
Oversized Glass Panels
A lot of San Antonio’s newer custom work, especially on the rural parcels and the larger lots east of town, revolves around oversized fixed panels and picture windows that bring in the pasture or oak canopy. These panels get heavy fast, and the wind-load requirements in Pasco County don’t shrink just because a house sits inland. We engineer every oversized lite for the county’s designated wind speed zone, with headers and frames that carry the load without sagging or binding. A 6-foot-by-8-foot panel is not a bigger small window. It’s a structural element.
Architectural Grilles & SDLs
When a San Antonio homeowner wants a replacement that looks like it was built in 1920 but performs like it was built this decade, we turn to architectural grilles and simulated divided lites. SDLs give you the divided-light look of the original wood sashes without the energy leak and without the maintenance. We can match historic muntin profiles on several of the older homes near the center of San Antonio, and we quote them side by side with true divided lite so you can see what you’re paying for. There is a real price gap between the two, and you deserve to see it on paper before you choose.
Commercial Storefront Glazing & Curtain Wall Systems
San Antonio is small, but it has storefronts and a few commercial buildings along State Road 52 that need real glazing work, not a handyman with a tube of silicone. We service commercial storefront glazing and curtain wall systems for the small retail and office spaces in and around San Antonio, including emergency board-up and glass replacement when a door gets kicked or a storm takes out a storefront pane. For dedicated San Antonio Door Installation, we handle that too. The same crew that is careful in your living room is the crew we send to your business. The standard does not change.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Antonio
We are an authorized installer for more than a dozen manufacturer lines, and on San Antonio jobs we regularly quote PGT, CGI, and Ply Gem because their product lines match the demands of inland Pasco County: high UV, high humidity, and wind-load ratings tied to the county’s designated wind speed zone. PGT and Cws in San Antonio both make aluminum and vinyl impact-rated lines that hold up to the thermal cycling we see here. Ply Gem has a strong mid-range vinyl offering that lands well in budget-sensitive retrofit work. We quote brands side by side on paper, with warranty durations stated, so you see exactly what each line costs and covers before you spend a dollar. We don’t push whatever is in the warehouse. That’s not how a glazier works.
Common Custom Windows & Doors Problems We See in San Antonio Homes
After more than a decade of opening up walls in Pasco County, we can tell you what we find before we even take the trim off. Here is what San Antonio keeps showing us:
- Non-standard rough openings. Pre-WWII wood-frame homes in San Antonio were framed by hand, and the openings are routinely 1-3 inches off in both width and height. A stock Andersen 400 Series unit will not drop into that hole. The opening has to be reframed to true dimensions first, and that work is part of the honest quote, not a surprise line item after demo starts.
- Failed glazing seals and rotted jambs on original single-pane sashes. Decades of inland humidity and daily summer thermal cycling attack the old putty glazing and the wood jambs around it. By the time a San Antonio homeowner calls us, the sash is often painted shut and the jamb is soft. That window is no longer a window. It’s a hole with glass in it.
- Non-impact windows that fail wind-load code. Pasco County’s designated wind speed zone means even an inland San Antonio home must meet Florida Building Code wind-load ratings. If the original windows don’t have approved shutters or impact protection, a permit-triggering renovation will flag them. Insurance companies ask the same question. We walk you through what passes and what doesn’t, before you order anything.
- Fogged insulated glass in 1980s-2000s construction. The manufactured homes and site-built homes from that era across the surrounding rural parcels are hitting the end of their seal life. Fogged units mean the seal has failed, and no amount of defogging fixes it permanently. The fix is a new sealed unit, correctly sized to the actual opening, which on older San Antonio construction is rarely the size the sticker says.
Pricing for Custom Windows & Doors in San Antonio, FL
We quote San Antonio work with real numbers because you deserve to see the math before we touch the wall. Here is what custom work in this market typically runs, installed:
| Service | Typical Range in San Antonio |
|---|---|
| Custom shape window (arched, round, eyebrow) | $1,200-$3,500 per unit |
| Oversized fixed glass panel (5×6 to 6×8) | $2,800-$6,500 installed |
| Architectural grilles / SDLs added to replacement unit | $150-$450 per sash |
| Rough-opening modification for non-standard opening | $200-$600 per opening |
| Commercial storefront glass replacement, per pane | $400-$1,400 |
| Curtain wall system (small commercial, per linear foot) | $300-$900 per linear foot |
The two factors that drive San Antonio pricing more than anything are rough-opening condition and the code upgrades a permit triggers. An older home with virgin openings and no prior retrofit will cost more than the same size window in a 1990s addition, because the rough opening has to be brought to true dimensions and the surrounding framing often needs repair. We write allowances into the contract for exactly that. No allowance is spent before you see the price in writing and approve it. Call (754) 238-2201 and we’ll put real numbers on your openings, free.
We Also Serve Cities Near San Antonio
Our San Antonio crews are on the road throughout the corner of Pasco County every week. We serve Wesley Chapel, Dade City, Trilby, and Lacoochee with the same free estimates, written quotes, and Done Right Promise. If you’re a few miles down State Road 52 or up toward the county line, the drive is short and the standard is the same.
Serving San Antonio, FL - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in San Antonio
Because the homes are older. San Antonio’s pre-WWII wood-frame houses were built with hand-framed rough openings that are routinely 1-3 inches off standard dimensions. In a newer Wesley Chapel community like Epperson or Mirada, a stock unit drops into a clean, modern opening and the install is fast. In San Antonio, the crew has to reframe the opening to true dimensions before the new unit can be set, and often the surrounding jamb has rot from decades of humidity that has to be cut out and repaired. That’s structural work, and it’s honest work. It costs what it costs, and we show you the number in writing before we start. Call (754) 238-2201 for an exact quote on your home.
You’ll see fog or moisture trapped between the two panes of an insulated glass unit, or a milky haze that won’t wipe off either side. That means the seal has failed and the gas fill is gone. In San Antonio’s inland humidity, this shows up faster than homeowners expect, because daily thermal cycling works the glazing seal like a hinge flexing ten thousand times. The fix is a new sealed unit, sized to the actual opening, which on older farmhouses near San Antonio is rarely the size printed on the old sticker. We measure, we order, we install, and we register the warranty.
Not necessarily, but you still have to meet Pasco County’s wind-load rating for the county’s designated wind speed zone. Florida Building Code requires windows to withstand the wind pressures for your area, and if they are not impact-rated, the home needs an approved shutter or protection system to pass inspection. We walk every San Antonio customer through the two paths: full Impact Windows & Doors in San Antonio or non-impact units plus approved shuttering. The price gap is real, and we quote both lines side by side on paper so you decide with the numbers in front of you.
The most common one is exactly what the local brief suggests: the rough opening does not meet current framing requirements once it is opened up. We also find undersized or rotted headers, failed flashing, and water damage that was not visible behind the trim. When a permit gets pulled in Pasco County, the inspector will look at the whole opening, not just the new window. That’s why we inspect before we quote, write allowances into the contract for what we expect, and price any surprise in writing before we touch it. You will never hear about a code issue from us after the wall is already open and the bill is already running.
Yes. We use architectural grilles and simulated divided lites to replicate the muntin profiles of the original wood sashes, paired with modern insulated glass and weatherseals that meet current Florida Building Code energy requirements. You get the divided-light look of a 1920s San Antonio cottage with the UV resistance and seal performance of a current unit. We have done this work on homes near the historic center of San Antonio, and the result reads as original from the street. Call (754) 238-2201 and bring us a photo of what you have now. We’ll tell you what it costs to keep that look and lose the leak.
In a cottage near San Antonio’s historic town center, our crew found original single-pane double-hungs painted shut with jamb rot from decades of humidity. The rough openings were 2 inches narrow for stock Andersen 400 Series units, so we reframed to true dimensions, installed flashing tape and fusion-welded frames, and now the home meets Pasco County wind-load code without the shutters the original windows needed. That is the job we do in San Antonio. That is the job we’ll do for you.
If you’re ready to price the work, call (754) 238-2201. The estimate is free, the quote is in writing, and a live person answers the phone. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Antonio with the rule that names the company: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.