Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across South Palm Beach
Custom window and door work in South Palm Beach is not like the same work anywhere else in Palm Beach County. The town sits on a barrier island so narrow that salt air lands on every building from two directions at once, which means original aluminum frames from the 1960s and 1970s corrode on both the ocean and Intracoastal sides, not just the east-facing units. Most of the housing stock is condominium towers built before impact-glazing mandates existed, so nearly every permitted replacement triggers a mandatory upgrade to Palm Beach County wind-load specs plus a condo board approval process. That combination is our daily work here. If you are in a South Palm Beach condo tower and your jalousie windows or sliding doors are showing salt pitting, failed seals, or track corrosion, call TruePane Windows & Doors at (754) 238-2201. We inspect first, write the scope, and price it before you commit to anything.
Key Takeaways:
- South Palm Beach is entirely within Palm Beach County’s Wind-Borne Debris Region, so impact-rated windows and doors are legally required for any permitted replacement.
- The island is too narrow for a salt-air buffer: Intracoastal-facing sliding door tracks corrode nearly as badly as oceanfront units.
- Condo board approval is required before any exterior-visible window or door change, and we coordinate that in writing before ordering.
- Free estimates are straightforward, line-itemed, and tied to manufacturer pricing you can verify.
Why TruePane Windows & Doors Is South Palm Beach’s Preferred Custom Windows & Doors Company
Forty-two years of glazing work in South Florida teaches a company what salt air does to aluminum, glass seals, and door hardware. Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That standard governs every custom window and door we install in South Palm Beach, from a single replacement casement in a 12th-floor condo off South Ocean Boulevard to a full curtain wall on a commercial storefront. We are not a franchise playbook. We hire local, train apprentices into journeymen, and plan to be answering the phone in this area thirty years from now.
South Palm Beach customers call us because the problems in their buildings repeat from one tower to the next: salt-pitted jambs, corroded sill pans, failed insulated glass seals, and original jalousie hardware that no longer closes tight. Our technicians see these failure patterns every week between Lantana Road to the south and the Lake Worth bridge to the north, across the 33480 zip code. We know what the condo boards along South Ocean Boulevard and Oceanfront Lane expect in an approval package, and we know what the county inspector will look for before opening any wall. That local knowledge means fewer surprises on the final bill, not more.
Our reputation in South Palm Beach rests on a simple practice: we measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. A live person answers our phone 24 hours a day, seven days a week. When you call, you get a voice, not a menu.
We also carry the Done Right Promise on every job and The Keystone Standard behind it. If something is not done right within 90 days, we make it right with no paperwork fights and no arguing. That is the whole point of Custom Windows & Doors work done properly.
Our Custom Windows & Doors Services in South Palm Beach
Every scope starts with an inspection, not a quote. In these older barrier island towers, what is behind the trim matters as much as the window itself: outdated wiring, rotted or undersized framing, failed waterproofing, and salt-eaten fasteners. We write allowances into the contract for what we can see, and we price and get written approval before touching anything we find once the wall is open.
Custom Shape Windows
South Palm Beach condos from the 1960s and 1970s often have unusual openings: arched transoms, angled corner glass, hexagonal fixed panels, and wide picture windows that are no longer standard sizes. Off-the-shelf replacements do not fit these openings without sloppy framing. We custom-build shape windows to the exact template of the existing rough opening, and we fabricate with impact-rated glazing so the permit passes the first time. For older South Palm Beach towers, that means no infill panels and no awkward caulk lines.
Architectural Grilles & SDLs
Many South Palm Beach condo buildings have a defined exterior aesthetic the board requires preserving. Simulated divided lites, or SDLs, and architectural grilles let an impact-rated window keep the original look of a 1970s tower while meeting current Palm Beach County wind-load requirements. We cut grille patterns to match the building’s original sightlines, and we submit the spec with the board approval package so there is no rejection mid-project.
Oversized Glass Panels
Oceanfront and Intracoastal-facing units in South Palm Beach hold some of the largest glass panels in the county: floor-to-ceiling sliding doors and fixed picture windows spanning eight to twelve feet. These panels carry significant wind-load requirements under Florida Building Code. We specify laminated impact glass with the correct interlayer thickness for the panel size and exposure, then stage the lift and install with real rigging. The job is not just about the glass; it is about setting a panel that stays true through hurricane season and ten more years after.
Curtain Wall Systems
South Palm Beach is mostly residential, but the commercial storefronts along South Ocean Boulevard and the small retail strips near the town’s southern boundary still need curtain wall work. We replace storefront framing, install impact-resistant curtain wall glazing, and handle the structural corner details that fail after decades of salt exposure. These jobs run on a different permit file than residential work, and we manage both through Palm Beach County’s building department.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Palm Beach
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, ES Windows, CWS, and ECO Window Systems. For South Palm Beach condos specifically, we frequently specify CGI and PGT impact-rated lines because their lamination and aluminum alloy mixes hold up better against the dual-sided salt corrosion we see on the island. We carry locally stocked parts for common hardware failures so a corroded door roller or broken casement operator does not wait on a two-week freight order. The manufacturer’s warranty gets registered in writing before our tech leaves your parking lot, and ours rides on top of it.
Common Custom Windows & Doors Problems We See in South Palm Beach Homes
- Salt-corroded aluminum frames on both exposures. The island’s narrow width means the Atlantic and Intracoastal salt air hit every unit, not just oceanfront floors. Frames pit, corners crack, and sill pans rust through, then water follows. We see this in west-facing units as often as east-facing ones.
- Failed seals in original single-pane and early insulated glass. Many of these 1970s units have never had a window replaced. Condensation between panes, hazing, and visible desiccation around the edges mean the unit has failed, and in South Palm Beach the replacement must be impact-rated under county code.
- Jalousie windows that cannot meet current code. Original jalousies from the 1960s and 1970s leak air and water, corrode at the crank mechanism, and cannot be upgraded piecemeal. Any permitted replacement requires a full change to impact-rated glazing in the existing opening.
- Condo board approval stalls custom work. Exterior-visible changes must be signed off before ordering, and boards often have specific make, model, and finish requirements. We draft the package with spec sheets, renderings, and wind-load documentation so the board can approve on the first submission.
Pricing for Custom Windows & Doors in South Palm Beach, FL
No one can price South Palm Beach custom window work without looking at the building, and anyone who gives a firm number over the phone is reading off a generic sheet. But here is honest book pricing for this market. Custom shape windows typically run $1,100 to $3,900 per opening depending on size, shape complexity, and impact rating. Architectural grilles and SDLs add $180 to $650 per sash depending on pattern and material. Oversized glass panels, meaning anything over eight feet, run $2,800 to $11,000 per panel installed, with the higher end reflecting laminated impact glass and crane work. A full curtain wall replacement on a South Palm Beach storefront ranges from $12,000 to $45,000 depending on linear footage and structural condition. Condo board permitting and county permit fees are separate line items, and we quote them separately. We inspect the openings, measure with a laser, and hand you a written line-item quote with both warranty layers listed. Call (754) 238-2201 to schedule a free estimate. We price fixed, and we do not change the price once the contract is signed unless you ask for a change.
We Also Serve Cities Near South Palm Beach
Our crews serve South Palm Beach locally and also cover nearby communities including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are just outside the town limits, the same inspection-first process applies. See our Custom Windows & Doors in South Palm Beach page for service area details or call us at (754) 238-2201.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in South Palm Beach
Yes. Every permitted window or door replacement in South Palm Beach requires a Palm Beach County building permit because the entire town sits within the Wind-Borne Debris Region, which mandates impact-rated glazing on any replacement. You also need written approval from your condo board before work begins, since exterior-visible changes fall under the association’s architectural control. We pull the county permit, coordinate inspections, and file the board package as part of our scope.
The island is too narrow for a salt-air buffer. South Palm Beach properties face the Atlantic on one side and the Intracoastal Waterway on the other, and the distance between them is short enough that wind-driven salt spray reaches both sides of every building. Track hardware, rollers, and frame corners on west-facing sliders pit and seize nearly as fast as east-facing ones. Full hardware replacement is usually needed building-wide, not just on the ocean-view floors. Call (754) 238-2201 and we will inspect your specific track and frame condition.
In most South Palm Beach buildings the answer is no, and it is not a manufacturer restriction; it is a code issue. The original single-pane aluminum frames from the 1960s and 1970s were not designed to carry laminated impact glass, and Palm Beach County will not sign off a permit that reuses a frame that cannot meet current wind-load specs. When the existing frame is structurally sound and the manufacturer offers an impact-rated insert compatible with it, there is a path. We check the frame condition and tell you honestly whether a glass-only replacement is code-compliant or whether a full frame replacement is required.
Your board needs a written approval showing the exact window or door product, the finish, the grille pattern if applicable, and confirmation that the replacement meets the county’s impact requirements. Boards in South Palm Beach often have standing architecture guidelines from the 1970s that list approved manufacturers and exterior colors. We draft the package with spec sheets, wind-load documentation, and side-by-side photos so the board can approve it in one pass. We do not order anything until the board’s written sign-off is in hand, because custom shapes and oversized panels are non-returnable.
We write a clearly labeled allowance into the contract before we start. When we open the wall and find rotted framing, termite damage, or outdated wiring that must be moved for the new opening, we stop, photograph it, price the fix, and get your written approval before touching it. No silent change orders, no bill at the end that was never discussed. That is the only way to handle a 1970s South Palm Beach condo wall honestly. Call (754) 238-2201 for a free estimate, and we will show you exactly how the allowance works in your written quote.
Contact TruePane Windows & Doors in South Palm Beach
If you live in a South Palm Beach condo and your original windows or sliders are failing, do not wait for the next storm to find the weak spot. We are a local company that answers the phone 24/7 with a live person, shows up on schedule, and stands behind the work with the Done Right Promise and The Keystone Standard. We serve the 33480 zip code, the towers along South Ocean Boulevard, the Intracoastal-facing buildings, and the small commercial storefronts throughout town. Call (754) 238-2201 today to schedule your free estimate. We will measure twice, quote in writing, and register both warranty layers before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach and the surrounding Palm Beach County coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.