Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across The Crossings
Custom windows and doors in The Crossings carry a set of rules most other Florida communities never have to think about. Every replacement opening, even a single failed window, must meet Miami-Dade Notice of Acceptance standards - a certification unique to the High Velocity Hurricane Zone this community sits inside. That fact shapes every quote we write for homeowners here. If you live off SW 104th Street, near the 117th Avenue corridor, or in the neighborhoods surrounding Killian Drive, call TruePane Windows & Doors at (754) 238-2201. We measure, we quote on paper, and we tell you exactly what your walls are hiding before any work begins.
Why TruePane Windows & Doors Is The Crossings’s Preferred Custom Windows & Doors Company
We have spent years opening up 1980s CBS homes in The Crossings and finding the same thing behind the stucco: frames set directly into block without a proper buck, corroded aluminum lips, and flashing that was never going to hold in a real storm. That experience matters. When a homeowner here asks about Custom Windows & Doors, they are not asking about a product catalog. They are asking whether the company on the other end of the phone understands what a Miami-Dade NOA actually requires for their specific rough opening. We do.
Our customers in The Crossings consistently point to two things in their feedback: the technician showed up on time and the quote did not move once the wall was open. Dale Kessler built this company on that second point. A written allowance in the contract means the homeowner is not standing in their living room holding a change order they never saw coming. We register both manufacturer warranty layers before the truck leaves your driveway, and our Done Right Promise is in writing - not a phone-call promise.
Crews are dispatched from our Miami office, and we schedule work throughout The Crossings every week. We do not route calls through a voicemail tree. A live person answers the phone 24 hours a day, seven days a week. If your custom window or door is failing and you need someone to look at it, call (754) 238-2201 and you will talk to a person, not a callback form.
Our Custom Windows & Doors Services in The Crossings
Custom Shape Windows
Older ranch homes and two-story CBS builds in The Crossings often have trapezoid, octagon, and eyebrow windows over entryways or stairwells that no off-the-shelf unit will replace. We frame, order, and install custom geometry windows that carry Miami-Dade NOA product approval for the exact design pressure your wall faces. A custom arch window ordered without NOA documentation will fail permit review here - we handle the cert side before the glass ever ships.

Architectural Grilles & SDLs
Simulated divided lites and true divided lite grilles change the look of a home, but in The Crossings they also have structural implications. Grille profiles on impact-rated glazing must be compatible with the laminated glass assembly and the frame’s NOA listing. We order SDLs through manufacturer lines that already have Miami-Dade approval for the profile, spacing, and glass make-up, so the window you see in the showroom is the window that passes inspection here. We quote Andersen, Pella, Marvin, PGT, and CGI lines side by side on paper so you see the difference in writing.

Impact-Rated Glazing
The Crossings sits inside the High Velocity Hurricane Zone, and most original windows in this community were installed before the code overhaul that followed Hurricane Andrew’s near-direct hit in 1992. Non-impact single-pane units do not meet current design pressure requirements. Replacing them with impact-rated glass from PGT or CGI is not a luxury option here - it is the baseline for a permitted opening. We pull the Miami-Dade NOA documentation for every unit we install and leave a copy with the homeowner.

Commercial Storefront Glazing
Small commercial spaces along the retail corridors near SW 117th Avenue and Kendall Drive in The Crossings need storefront systems that hold up to humidity and salt air. We supply and install commercial storefront glazing with thermally broken aluminum frames, and we handle curtain wall systems where the storefront spans two stories or more. The same Miami-Dade approval rules apply to commercial openings, and we manage that paperwork as part of the install.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Crossings
We are an authorized installer for more than a dozen manufacturer lines, and for The Crossings customers we commonly work with PGT, CGI, and Ply Gem because their impact-rated product lines carry the Miami-Dade NOA documentation this jurisdiction requires. We also service and replace Ply Gem and CWS units installed by other companies. Stocking local parts for The Crossings means we are not waiting on a warehouse in another state when a sash, balance, or multi-point lock fails. If a manufacturer has the part available in South Florida, we can usually have it on the truck within days.
Common Custom Windows & Doors Problems We See in The Crossings Homes
- Corroded aluminum frames from ambient salt air. The Crossings sits a few miles from Biscayne Bay, and that salt air works on aluminum frame lips year-round. Once the lip corrodes, water gets behind the stucco and spalls the masonry around the jamb.
- Non-impact single-pane units from the 1980s. Most original windows in this community were installed before Miami-Dade HVHZ rules existed. One failed unit in a non-compliant wall means that opening must be brought to current code when replaced.
- Missing or improperly set window bucks. We regularly find 1980s CBS homes where the frame was set directly into the block without a buck. That means a simple insert is not possible - the rough opening has to be rebuilt before a compliant window can go in.
- Trapped humidity from improperly flashed masonry. Flashing tape applied wrong over block traps moisture behind the stucco, and the new insulated glass unit fogs within a few wet seasons. We re-flash correctly and document it before the reveal is finished.
Pricing for Custom Windows & Doors in The Crossings, FL
A single custom-shaped window in The Crossings typically runs $900 to $2,600, including the frame-out work that older CBS rough openings usually need. A full-frame impact-rated replacement for a standard opening runs $1,200 to $3,400 per opening, depending on size and the NOA-rated product line you choose. Architectural grilles and SDLs add $180 to $650 per sash. Commercial storefront glazing starts around $85 per square foot for basic thermally broken systems and climbs from there for curtain wall work. The biggest variable in this community is the rough opening itself - when there is no buck or the block is cracked, the frame-out work adds $400 to $900 per opening. We write allowances into the contract so you know that cost before the stucco comes off, not after. Call (754) 238-2201 for a free estimate, and we will put the numbers on paper.
We Also Serve Cities Near The Crossings
TruePane Windows & Doors handles custom window and door work throughout this part of South Florida. We serve The Crossings and nearby communities including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. The same Miami-Dade NOA standards, the same written allowances, and the same Done Right Promise apply on every job.
Serving The Crossings, FL - Our Local Coverage Area
We’re based in the The Crossings area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in The Crossings
A Miami-Dade Notice of Acceptance means the specific window or door unit you ordered has been tested and approved for the design pressure and impact requirements of the High Velocity Hurricane Zone. Every replacement opening in The Crossings must carry one. If you order a custom window from a line without NOA documentation for that exact size and configuration, it will not pass permit review here. We verify the NOA before the order is placed and leave a copy with you after install. Call (754) 238-2201 and we will walk you through the approval for your specific opening.
In The Crossings, the most common reason is that the original 1980s frame was set directly into the concrete block without a proper buck, so a standard insert will not work. The opening has to be saw-cut, the old frame removed, a new buck poured or anchored, and then the new window set with the NOA-specified fastener schedule. We price that frame-out work as a written allowance in the original contract, so the number does not surprise you - but if the opening is worse than expected, you approve the exact cost in writing before we touch it. Call (754) 238-2201 for a quote that accounts for the real condition of your walls.
Fog between the panes means the insulated glass unit’s seal has failed. In The Crossings humidity, that failure usually gets worse, not better. If the frame is still sound and the opening is compliant, we can replace just the insulated glass unit. If the frame is original non-impact aluminum from the 1980s, you have a bigger problem: that opening likely does not meet current HVHZ requirements, and a full replacement is the code-compliant route. Call (754) 238-2201 and we will tell you which situation you are in after a free inspection.
In a concrete block load-bearing wall, changing the rough opening size or shape usually requires an engineer’s letter and a lintel or header change. The block carries the roof load, and cutting a wider or taller opening without a properly sized lintel is a structural risk. For most custom shape windows in The Crossings, we coordinate the engineering and pull the permit as part of the job. Call (754) 238-2201 to discuss your wall and what the opening can structurally support.
The biggest difference is not the glass coating - it is the frame and the installation. In The Crossings, original 1980s aluminum frames conduct South Florida heat straight into the house and have no thermal break. A properly installed vinyl or thermally broken aluminum frame, anchored into a correct buck with the right flashing, cuts air infiltration and heat gain far more than a low-E coating alone. We quote energy-efficient lines from manufacturers whose products carry Miami-Dade approval, so you get both the efficiency and the code compliance. Call (754) 238-2201 for a side-by-side quote on paper.
What Opening Up an Older The Crossings Home Actually Turns Up
We have never opened a 1980s CBS wall in The Crossings and found it exactly as the original plans said. What we find instead: wiring run through the rough opening where the new frame needs to sit, flashing that was never intended to hold, and block that has spalled behind the stucco from decades of moisture. On a 1984 CBS ranch near SW 112th Avenue, our crew found a failed single-hung with a rotted jamb and fogged insulated glass unit set directly into the block without a buck. The permit triggered Miami-Dade NOA compliance for that opening, so we saw-cut the stucco, removed the non-impact aluminum frame, poured a new buck, and anchored a fusion-welded impact-rated casement with the NOA-specified fastener schedule before re-flashing and finishing the reveal. That is the job. That is what a custom window replacement in The Crossings actually requires, and it is why our contracts carry written allowances for exactly these discoveries. You approve the cost in writing before we spend your money. Nothing moves without your signature.
Call TruePane Windows & Doors at (754) 238-2201 to schedule a free estimate for custom windows and doors in The Crossings. We will measure every opening, quote manufacturer lines side by side on paper, and show you what the NOA documentation says about your specific opening. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving The Crossings and all of South Florida with a standard that has stood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After