Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Broadview Park
Door installation in Broadview Park runs $800 to $4,200 for most entry and storm doors, with impact-rated units on the upper end of that range. The price moves based on whether the rough opening in your concrete block wall needs to be cut back or filled before the new frame can be set, and whether your existing opening carried a jalousie or thin-frame aluminum unit that predates modern NOA sizing. We’ve been doing this work in Broadview Park long enough to tell you what the opening will need before we touch it. Call (754) 238-2201 for a free estimate.
Every exterior door replacement in Broadview Park must meet Broward County’s High Velocity Hurricane Zone impact standards. Any opening that once held a jalousie or thin-frame aluminum unit typically requires masonry cutback or infill before a modern impact-rated door can sit square. Out-of-area crews often miss this until demolition exposes the problem. We measure twice and quote the masonry work up front, so the number you get is the number you pay.
Broadview Park’s postwar ranch homes live by their own set of rules. The blocks were poured before impact codes existed, the rough openings were framed for hardware that hasn’t been sold in decades, and the flat lots shed water slowly. A door that isn’t set right here will bind in July and leak in September. We work this stock every week, from SW 18th Street to the streets around the southern edge of State Road 7. You’ll get a crew that knows the walls before the saw comes out.
Why TruePane Windows & Doors Is Broadview Park’s Preferred Door Installation Company
TruePane Windows & Doors is led by Dale Kessler, a second-generation glazier who founded the company in 2008 on a rule that still names the business: if the pane is not true, the job is not done. Our standard in Broadview Park is the same as it is on every job we run: both manufacturer warranty layers registered in writing, durations stated, and a Done Right Promise on every install. No paperwork fights. No arguing. We stand behind it.
Broadview Park homeowners call us because we answer the phone. A live person picks up 24 hours a day, seven days a week, not a voicemail tree or a regional call center. When you call about a door that won’t latch or a slider that’s dragging, you talk to someone who can schedule the work and tell you what to expect. We hire local, train apprentices into journeymen, and act like a company that plans to be in town in thirty years. Dale still reviews every Broadview Park estimate personally.
Our technicians are background-checked and uniformed, and they measure every opening twice before any order gets placed. We quote manufacturer lines side by side on paper, including PGT, CGI, and Ply Gem, so you see exactly what you’re buying and what it costs. Before the truck leaves your driveway, both warranty layers are registered. That’s The Keystone Standard, and it applies to every door we set in Broadview Park.
Dispatch and scheduling are coordinated from our South Florida office in Miami, and crews serve Broadview Park locally. We don’t outsource installs to subcontractors we don’t know. The people who show up work for us, train with us, and answer to Dale. That matters when the rough opening in your 1960s ranch doesn’t match anything in a catalog.
Our Door Installation Services in Broadview Park
Entry & Swing Doors
Most Broadview Park entry doors we replace are original 1950s and 60s units set in concrete block walls that a modern impact-rated assembly doesn’t fit without modification. A basic fiberglass entry door starts around $800 for a standard opening, and climbs to $2,800 to $3,600 when the masonry surround needs to be cut back or infilled to accept a new impact-rated slab and frame. We handle both the cut and the fill in-house, so you’re not coordinating a mason and a door crew on separate days. Every entry door we set in Broadview Park carries a NOA-listed assembly, because Broward County inspectors check.
Storm Doors
A storm door over your existing entry door runs $450 to $1,200 in Broadview Park, depending on glass type and frame finish. The climate here punishes cheap storm doors: humidity rusts the hinges, salt air pits the aluminum, and summer thunderstorms blow rain straight at the threshold. We stock units with powder-coated frames and stainless hardware that hold up. If your entry door is original and you’re adding a storm door, we’ll check the rough opening dimensions on both units at the same visit, because the inner door usually needs work before the outer one can seal true.
Arched & Custom Doors
Some Broadview Park ranches from the early 1960s have arched entryways, and the concrete block around those arches was often poured rough. A custom arched door replacement here runs $2,500 to $5,000 or more, because the radius has to be templated, the masonry usually needs cleanup, and the assembly has to be ordered as a custom impact-rated unit. We’ve done enough of them to know the arch on the paper needs to match the arch in the wall, not the arch they assumed from a photo. When we template, we cut a plywood pattern on site and hold it in the opening before the order goes to the manufacturer.
Bifold & Folding Doors
Interior bifold and folding doors in Broadview Park closets and laundry rooms run $300 to $900 including hardware and labor. Exterior folding door systems, the multi-panel units that open a wall to a patio, are a different job entirely. In Broadview Park, any exterior folding door assembly must be HVHZ-rated and NOA-listed, which pushes a basic three-panel folding system into the $6,000 to $12,000 range before installation. We’ll quote it line by line and show you the NOA documentation before you sign anything. Flat-lot drainage gets addressed at the same time, because a folding door with a bad sill pan is a standing invitation for stormwater.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Park
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Ply Gem, and CWS. We stock parts and hardware locally for Broadview Park customers, so a hinge replacement or striker adjustment doesn’t mean waiting on a freight truck from out of state. When you need a specific impact-rated assembly, we quote models side by side on paper so you can compare the NOA listing, glass package, warranty terms, and price without picking up the phone. If it’s a brand we wouldn’t set in our own mother’s home, we won’t quote it. For Door Installation work anywhere in Broward County, that’s the standard we hold.
Common Door Installation Problems We See in Broadview Park Homes
- Rough openings that don’t match modern impact door sizes. The concrete block ranches built in Broadview Park between the early 1950s and mid-1970s were framed around jalousie panels and thin-frame aluminum sliders. A modern impact-rated door rarely fits that opening without masonry infill or cutback, and crews that skip that step leave oversized gaps that get stuffed with shims and caulk. We cut or fill the block to the manufacturer’s specified dimensions before the jamb is set.
- Sill pans that fail on flat lots. Much of Broadview Park drains slowly after heavy rain, and a poorly flashed door sill wicks stormwater behind the jamb. Within a few seasons the insulated glass unit fogs, the frame starts to corrode, and the threshold rot follows. We set sill pans with positive slope and flashing tape at every opening, whether it’s an entry door or a sliding glass conversion.
- Non-NOA door assemblies on replacement jobs. Broward County inspectors will flag a non-approved door assembly on site, and the homeowner is left with a failed inspection and an insurance carrier that may deny the next storm claim. We will not install a door in Broadview Park that doesn’t carry Miami-Dade or Broward County NOA documentation. It’s not worth the risk to you, and it’s not worth our name.
- Corrosion from humid, salt-tinged air. Broadview Park sits far enough inland to avoid direct coastal spray, but not far enough to escape the salt and humidity that drift in from the Atlantic. Original aluminum frames and steel hinges on 60-year-old doors are often pitted beyond repair. We replace them with marine-grade stainless hardware and powder-coated frames sized for the opening, not the catalog.
Pricing for Door Installation in Broadview Park, FL
A standard entry door replacement in Broadview Park runs $800 to $2,200 when the rough opening is clean and no masonry adjustment is needed. Add HVHZ impact-rated glazing and a NOA-listed assembly, and the range moves to $2,400 to $4,200. Storm doors run $450 to $1,200. Custom arched doors start around $2,500 and can reach $5,000 or more depending on radius and glass package. Bifold interior doors are $300 to $900; exterior folding systems run $6,000 to $12,000. Masonry cutback or infill adds $400 to $1,800 depending on how much block has to move.
What moves the price most in Broadview Park is what you can’t see until the old unit comes out. If your 1960s opening needs 3 inches of infill, that’s a real cost we show you on the estimate before any cutting starts. We don’t surprise you after the fact. Call (754) 238-2201 for a free, written estimate. We’ll measure your openings, check the NOA documentation, and tell you exactly what the job costs.
For homeowners throughout Broadview Park, the estimate visit is also your chance to see the numbers side by side: PGT versus CGI, fiberglass versus steel, a junky left-in-place jamb versus a new one. We write it down. You keep the paper.
We Also Serve Cities Near Broadview Park
Our crews work regularly in the communities around Broadview Park, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. The same NOA requirements, the same masonry conversations, and the same flat-lot drainage checks apply, though each area has its own housing stock quirks. If you’re a few minutes from Broadview Park and need a door measured, quoted, and set right, call (754) 238-2201. We’ll schedule the site visit and bring the masonry tools if the opening calls for them.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Broadview Park
Yes. Broadview Park sits entirely within Broward County’s High Velocity Hurricane Zone, one of only two counties in the country with that designation, so any exterior door replacement must carry a Miami-Dade or Broward County Notice of Acceptance. We pull the permit, schedule the inspection, and keep the NOA paperwork on file so the inspector can verify it on site. Call (754) 238-2201 and we’ll check your existing assembly before you buy anything.
You can usually replace just the door, but the side panels often have to go. Jalousie panels are not impact-rated, and Broward County code requires that any exterior opening you touch meet current HVHZ standards. Once the door is out, the inspector will notice what’s next to it. We’ll quote the door and the panels separately, so you see the cost of doing the door now versus doing the whole opening correctly the first time. That number is part of your free estimate.
Postwar CBS construction in Broadview Park was framed before impact ratings existed, so the rough openings were sized for narrow aluminum units, not modern impact-rated door assemblies. A new door often needs an inch or two more width or height, and that means cutting the block with a masonry saw or adding infill to close the gap. We scope that work during the estimate, so it’s part of the written price, not a change order after demolition. For a precise quote on your opening, call (754) 238-2201.
In most cases, yes. Insurers in Broward County routinely offer wind mitigation credits for NOA-listed impact-rated door assemblies, and some carriers will reduce the hurricane portion of your premium by a meaningful percentage. You’ll need the NOA documentation and sometimes a wind mitigation inspection to claim the credit. We register both warranty layers and keep every NOA on file, so the paperwork is ready when your carrier asks. We can’t quote your premium reduction, but we can hand you the documents.
We set the sill pan with a positive slope away from the interior, apply flashing tape under the threshold, and shim the pan so water moves out, not back. On flat lots where standing water is common after heavy rain, we may recommend extending the exterior slab with a small apron or adjusting the threshold height before the door is set. This is built into the estimate, not improvised on site. If your existing door leaks at the base, call (754) 238-2201 and we’ll tell you what’s causing it.
Call TruePane for Door Installation in Broadview Park, FL
When you’re ready to replace the door that’s been binding since the Clinton administration, call (754) 238-2201. You’ll get a live person who knows Broadview Park, knows HVHZ code, and can schedule a site visit to measure your openings. The estimate is free, written, and includes the masonry work if your rough opening needs it. No change orders after the fact. No warranty layers left unregistered. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Broadview Park and Broward County with a craft commitment rooted in years of glazing heritage.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.