Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Hunters Creek
Door installation in Hunters Creek usually runs between $450 for a simple interior slab replacement and $4,800 for a full impact-rated French door system with new framing. Most straightforward front entry replacements land between $1,100 and $2,600, installed. If you live in one of the stucco-over-block homes built between 1986 and 2005, expect the rough opening to need shimming or re-bucking before the new unit goes in, because those original frames were cut for much thinner aluminum jambs. Our crews know these houses. Call (754) 238-2201 to schedule a free estimate, and a live person will answer.
Why TruePane Windows & Doors Is Hunters Creek’s Preferred Door Installation Company
TruePane Windows & Doors has worked in Hunters Creek long enough to know that this community’s homes age on a very specific schedule. The original builder-grade doors in subdivisions off Town Center Boulevard and along the Hunters Creek golf course corridor were installed when the master plan was still being built out, and they have been failing in predictable waves ever since. We handle the replacement work on Door Installation projects for homeowners who want it done once, correctly, in writing.
Dale Kessler founded this company in 2008 after more than two decades in the glazing trade, and the rule he keeps on the whiteboard still governs every job: if the pane is not true, the job is not done. Our Hunters Creek customers deal with background-checked, uniformed technicians who measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
We also know what this community’s HOA process demands. Several of Hunters Creek’s sub-associations require architectural review committee approval on exterior door color, frame material, and grid style before a permit gets pulled. We help you prepare that paperwork correctly the first time. That is the difference between a two-week job and a six-week headache.
Our Door Installation Services in Hunters Creek
Entry & Swing Doors
Front entry doors in Hunters Creek take a beating from the late-afternoon sun and the short, violent thunderstorms that roll through Orange County most summer days. A builder-grade steel door from the late 1990s will have swollen at the sill, lost its weatherstripping, or started binding at the latch by now. We install fiberglass and composite entry systems that hold their shape through humidity swings exceeding 90%. Typical costs for a new pre-hung entry door in Hunters Creek run $1,100 to $2,400 depending on the slab and hardware you choose.
Double & French Doors
French doors are common in Hunters Creek homes that back onto retention ponds or the golf course, and they fail in a specific pattern here. The insulated glass seals break down by roughly year 15, leaving condensation between the panes that no amount of cleaning will remove. Replacing the slabs on an existing French door system in Hunters Creek typically runs $1,800 to $3,800. If the frame has bowed outward from thermal cycling against stucco block, which we see regularly, plan for shimming work that out-of-area crews often miss.
Bifold & Folding Doors
Folding door systems have become popular in Hunters Creek as homeowners open their living areas toward screened lanais. The challenge here is weight. Modern multi-panel bifolds can weigh several hundred pounds, and the original headers in a 1990s stucco block home were not engineered for that load. We check the header and add reinforcement where needed before hanging the panels. A quality bifold installation in Hunters Creek starts around $3,200 and can exceed $7,000 for larger openings.
Pivot Doors
Pivot doors are a statement piece, and Hunters Creek homeowners who choose them usually want something that reads as custom. The pivot hardware has to be set into a floor that is absolutely level, which is not a given in slab-on-grade homes that have settled over 25 years. We check floor deflection before ordering the door. Realistic pricing for a pivot door installation here runs $3,500 to $8,000, depending on panel size and hardware grade.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hunters Creek
We are an authorized installer for, PGT, CGI, and ES Windows, among others. For Hunters Creek specifically, CGI and PGT impact-rated lines come up most often because their design-pressure ratings clear Orange County’s wind-load code without an argument. We also work with CWS and ECO Window Systems when a customer wants a specific price point or laminate profile. Because we service these brands regularly, replacement parts and warranty claims for Hunters Creek homeowners move faster than they would through a one-off contractor. We quote manufacturer lines side by side on paper, so you see exactly what you are paying for before you sign anything.
Common Door Installation Problems We See in Hunters Creek Homes
- Bowed rough openings from thermal cycling. The original late-1980s aluminum frames in Hunters Creek were set tight against stucco block, and decades of Florida heat expansion have pushed many of them slightly outward. A new composite or fiberglass door will not sit flush without shimming, and skipping that step leaves gaps that defeat the unit’s energy rating.
- HOA architectural review rejections. Several Hunters Creek sub-associations require approval on exterior door color, material, and grid style before a permit is pulled. Choosing a door that fails review forces a second order and delays the permit by two to four weeks while the old door keeps leaking air.
- Fogged insulated glass in French and patio doors. The humidity swings here regularly exceed 90%, and the seals on double-pane units in Hunters Creek rarely survive past 15 years. We replace more fogged French door panels in this community than any other single repair.
- Missing sill pans and flashing tape. A surprising number of original Hunters Creek doors were installed without proper sill pans. Afternoon thunderstorm-driven water gets behind the stucco, rots the subfloor, and voids the door warranty. We flash every jamb and install a sill pan on every exterior door replacement, no exceptions.
Pricing for Door Installation in Hunters Creek, FL
Here is what door installation actually costs in Hunters Creek in 2026, based on the work we have completed in this community over the past several years.
| Service | Typical Range |
|---|---|
| Entry door replacement (pre-hung, fiberglass or steel) | $1,100 - $2,600 |
| French door slab replacement (2 panels) | $1,800 - $3,800 |
| Impact-rated front entry door | $2,200 - $4,200 |
| Bifold / folding door system | $3,200 - $7,000+ |
| Pivot door with custom panel | $3,500 - $8,000+ |
| Storm door installation | $450 - $950 |
| Full rough opening re-buck / shim correction | $300 - $800 |
The big variables are the rough opening condition, whether the HOA review adds time, and whether you want impact-rated glass. We offer a permanent 5% discount for seniors and veterans, and a free written repair estimate. Every estimate is free, and the quote you get is the number on the bill. Call (754) 238-2201 to schedule yours.
We Also Serve Cities Near Hunters Creek
Our crew regularly works in the communities surrounding Hunters Creek, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are in one of those areas and need Door Installation in Hunters Creek or anywhere nearby, the same crew and the same written warranty apply.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Hunters Creek
Yes, for most of Hunters Creek’s residential sub-associations, exterior door replacement requires architectural review committee approval before Orange County will issue a permit. The review typically takes two to four weeks, depending on the sub-association’s meeting schedule. We prepare the submittal package for you with door color, material, and grid style specified, so the committee has what it needs on the first pass. Call (754) 238-2201 and we will walk you through your specific sub-association’s process.
Because the insulated glass seals in builder-grade double doors from the 1986-2005 build wave degrade under Hunters Creek’s humidity swings and UV exposure faster than the manufacturers’ optimistic lifespans suggest. When the desiccant inside the spacer bar becomes saturated, condensation appears between the panes and the only real fix is replacing the slab or the entire unit. We see this in Hunters Creek homes constantly, and we quote replacement slabs and full systems side by side so you can choose. Call (754) 238-2201 for a free estimate.
Usually not, and here is why: the original aluminum frames in Hunters Creek were engineered for much lighter single-pane glazing, and impact-rated laminated glass adds significant weight. The frame extrusion is rarely thick enough to carry the new unit safely or meet Orange County’s design-pressure requirements. In most cases, a full frame replacement is necessary. We will tell you honestly which route applies to your opening after measuring it. Call (754) 238-2201 to schedule a measurement.
The most common failure we see is air and water intrusion around the jamb of original aluminum-frame doors, caused by the frame bowing outward after 25 to 30 years of thermal cycling against stucco block. The fix is re-shimming or re-bucking the rough opening and re-flashing the jamb before setting the new unit. Skipping this step voids the new door’s warranty and leaves the house leaking energy. Call (754) 238-2201 for a free assessment of your specific opening.
Often yes, especially in Hunters Creek where the original doors and windows share the same build era and the same failure timeline. Ordering door and window units together lets us consolidate the permit, the HOA submittal, and the installation scheduling, which saves you real money on labor and avoids two separate disruptions to your home. We will quote both scopes on paper before you commit to anything. Call (754) 238-2201 for a free, written estimate.
A Word on Hunters Creek’s HOA and Build Era
Hunters Creek was built as a master-planned community almost entirely between 1986 and 2005, which means the door rough openings across the entire community were cut for the same generation of thin aluminum entry slabs and sliders. Upgrading to a modern impact-rated composite or fiberglass unit almost always requires shimming or re-bucking the opening, not just swapping trim. We have corrected hundreds of these openings across Hunters Creek, and the difference is measurable in the air-infiltration test we run after every exterior door install.
One job stands out. Our crew replaced a fogged double-pane French door in a stucco-over-block home near the Hunters Creek golf course. The original aluminum frame had bowed outward after 30 years of thermal cycling, so we re-checked plumb and level before setting the new impact-rated unit, then flashed the jamb with tape to meet Orange County wind-load code. No stucco repair was needed, and the homeowner’s air-conditioning bill dropped noticeably that first summer. That is the standard we bring to every door in Hunters Creek.
If you live in Hunters Creek and your front door is starting to bind, fog, or leak air, call (754) 238-2201 for a free estimate. A live person answers, 24 hours a day, 7 days a week. We will measure your opening, check the rough frame, and give you a written quote for exactly what the job requires. No surprises on the bill, and the work is guaranteed in writing under the Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hunters Creek and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.