Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Longwood
Door installation in Longwood runs $850 to $3,800 for most entry and swing doors, with French doors typically landing between $2,400 and $6,500 depending on size, glass package, and framing condition. Most single-door replacements are completed in one day once the door is on site, and TruePane has been installing doors in Longwood long enough to know that the real cost driver here isn’t the door itself. It’s what’s behind it. If you’re in an older Longwood home, call (754) 238-2201 for a free estimate, and we’ll tell you what your opening actually needs before any number is finalized.
We know Longwood’s housing stock better than most outfits working this market. It splits into two very different jobs: the late-19th and early-20th century cottages around the Longwood Historic Village, and the sprawling 1970s and 1980s concrete-block ranch tracts like Sanlando Springs and neighborhoods running west out toward Wekiva Springs Road. Each one demands a different approach to framing, fastening, and paperwork. Most companies treat both the same. That’s where jobs go sideways.
Why TruePane Windows & Doors Is Longwood’s Preferred Door Installation Company
Homeowners here tend to keep their houses a long time. We respect that. The work we do in Longwood gets backed by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before our truck leaves your driveway. No paperwork fights later. Dale Kessler founded TruePane in 2008 with the same rule he learned as a second-generation glazier: if the pane isn’t true, the job isn’t done. That applies to every door we set.
Longwood residents who’ve lived here twenty, thirty, sometimes forty years tell us the same thing: they remember the contractor who left a door that binds in July or a threshold that leaks in August afternoon downpours. We don’t want to be that contractor. Our technicians are background-checked and uniformed, they measure every opening twice, and they quote manufacturer lines side by side on paper so you see exactly what you’re buying. You call, a live person answers, 24/7. You will not get a voicemail tree or a regional call center.
One thing that sets us apart in Longwood specifically: we know the Historic Preservation Board process. A homeowner in the Longwood Historic Village can’t just pull a standard Seminole County permit for a door replacement. We’ll talk through that with you before any work is scheduled, so you don’t find out about it from a stop-work order.
Our Door Installation Services in Longwood
Longwood’s housing runs from Craftsman cottages near Historic Longwood Village to CBS ranches off State Road 434 and up through Wekiva-area subdivisions. Our Door Installation team handles that spread. Here are the services Longwood homeowners ask us about most.
Entry & Swing Doors
Entry door replacement in Longwood is rarely a simple swap, especially in the 1970s and 1980s ranch homes that dominate the city. The original hollow-core exterior doors in those houses were installed with flashing tape that has long since failed, and the concrete-block openings often need new buck framing to meet current Florida Building Code wind-load minimums. We price that work as a written allowance before the job starts, so you’re not hit with a surprise line item when the old door comes out.
Storm Doors
Storm doors make sense in Longwood’s climate because they add a layer of protection against the intense UV that breaks down finishes and the afternoon thunderstorms that drive water against east-facing entries. They also let you cross-ventilate in the cooler months without letting in palmetto bugs. We measure each opening twice, and we mount them on proper Z-bar so they don’t sag after two seasons.
Arched & Custom Doors
If you live in the Longwood Historic Village, standard off-the-shelf units often won’t pass the Certificate of Appropriateness review. Arched tops, original lite patterns, specific wood species, particular profiles. That’s a real constraint. We work with manufacturers who can match those details, and we’ve installed custom doors in the historic district that the board approved without a second hearing. This is the craft side of door work, and it’s the part we don’t rush.
Double & French Doors
Double and French door installation in Longwood often involves opening up a wall, which means a permit and a structural header. That’s not a handyman job. We pull the permit, we size the header correctly for the span, and we flash the rough opening the way Florida’s humidity demands. Every one of these jobs gets a written line-item quote before we order the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Longwood
TruePane is an authorized installer for more than a dozen manufacturer lines, and in Longwood we spec PGT, CGI, and Ply Gem most often. PGT and CGI carry the impact ratings that matter when a hurricane bearing down on the peninsula, and Ply Gem gives us a strong value tier for homeowners who want a solid door without the premium impact rating. Because we register both warranty layers in writing before we leave the driveway, you know your coverage is active, not promised.
Common Door Installation Problems We See in Longwood Homes
- Rotted wood jambs in 1970s ranch homes. The original flashing tape on the concrete-block openings in Sanlando Springs and surrounding tracts failed years ago. Humidity wicked into the wood, and the jamb rotted behind the casing where you couldn’t see it until the door sagged.
- Fogged glass in door lites. Central Florida’s heat-cool cycling is brutal on door glass seals. We replace more fogged door glass in Longwood than in coastal areas, because the inland UV exposure is consistent year-round, even when there’s no salt air corrosion.
- Non-approvable door replacements in the historic district. A homeowner in the Longwood Historic Village buys a door, schedules an install, and the installer discovers the Certificate of Appropriateness was never obtained. The door sits in the garage. We’ve seen it. We stop it before it happens.
- Undersized framing around old openings. Many original Longwood ranch doors were framed to older, looser wind-load standards. Opening them up reveals jacks and headers that don’t meet current code, and they have to be corrected. We write that into the contract as a known scope item, not a surprise.
On a 1970s ranch in the Sanlando Springs tract, we pulled an original hollow-core exterior door and found the jamb rotted from years of failed flashing tape and humidity wicking into the concrete block. We replaced it with an Andersen impact-rated door, corrected the opening with new framing to meet current wind-load minimums, and wrote the rot repair into the contract as an allowance before touching it. That’s how we work in Longwood.
Pricing for Door Installation in Longwood, FL
Here’s what our Door Installation in Longwood customers can expect on paper. These are honest ranges for this market, not national averages.
| Door Type | Typical Longwood Price Range |
|---|---|
| Entry & Swing Door (standard, single) | $850 - $2,800 |
| Entry Door (impact-rated, PGT/CGI) | $2,200 - $4,800 |
| Storm Door | $400 - $1,400 |
| Double/French Door (standard) | $2,400 - $5,500 |
| Double/French Door (impact-rated) | $4,200 - $8,500 |
| Arched/Custom Door (including historic match) | $3,500 - $9,500 |
| Rotted jamb/framing correction (allowance) | $300 - $1,200 |
Framing corrections, historic compliance work, and impact-rated glass packages are the three things that move a quote in Longwood. We don’t hide those costs. We put them in writing. Call (754) 238-2201 for a free estimate, and you’ll get a line-item breakdown before you commit to anything.
We Also Serve Cities Near Longwood
We serve Longwood as part of our wider Seminole County coverage, including Lake Mary, Altamonte Springs, Casselberry, and Winter Springs. Crews are dispatched and scheduled from our South Florida office, but the technicians who show up at your door in Longwood are local, uniformed, and familiar with the building department here.
Serving Longwood, FL - Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Longwood
Only if your home is in the Longwood Historic Village. That district requires a Certificate of Appropriateness from the city’s Historic Preservation Board before a building permit is issued, and replacement doors must generally match the original lite patterns and profiles. Standard off-the-shelf vinyl units are often non-approvable there. If your home is outside the historic district, the normal Seminole County permitting process applies. Call (754) 238-2201 and we’ll tell you which side of the line your property falls on.
You find things. Most of the original 1970s concrete-block homes in Longwood have flashing tape that failed decades ago, compromised jamb wood, and framing that doesn’t meet current wind-load minimums. That’s why we write a framing allowance into every older-home door contract in Longwood. You approve the exact cost, in writing, before we correct it.
Longwood’s inland position means no salt air corrosion, but the daily heat-cool cycling from Central Florida’s intense UV and afternoon thunderstorms degrades door glass seals and weatherstripping faster than national averages. High humidity also pushes mold growth into any gap around improperly flashed frames. It’s a different failure mode than the coast, but it’s just as aggressive.
Not everywhere. Current Florida Building Code wind-load minimums apply to new work, but impact-rated doors are not universally required in interior Seminole County the way they often are closer to the coast. However, many Longwood homeowners choose impact-rated PGT or CGI doors for their insurance benefits and storm performance. We’ll quote both standard and impact options side by side so you can decide with full information.
In most cases, yes. We work with manufacturers who can replicate original lite patterns, wood species, and profiles, including arched tops where the original design calls for them. We’ve installed custom doors in the Longwood Historic Village that passed Certificate of Appropriateness review without a second hearing. Call (754) 238-2201 and we’ll assess your specific door and what the board will likely require.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.