Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Beach Shores
Door installation in Palm Beach Shores costs between $850 and $4,800 for most residential replacements, with Impact Windows & Doors - Palm Beach Shores entry systems running $2,800-$6,500 depending on size and finish. A standard slab replacement can often be done in one visit. But the real question here isn’t what a new door costs, it’s whether it will still latch, seal, and swing true after three summers of Atlantic salt and lagoon humidity working on it from both sides. If you’re on South Ocean Avenue or anywhere along the strip, call TruePane at (754) 238-2201 and we’ll walk every opening with you before a single frame is ordered.
Why TruePane Windows & Doors Is Palm Beach Shores’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008, but he learned the trade from his father long before that, and the company carries years of glazing and door work into every job we take in Palm Beach Shores. Our crews know what this town’s buildings do to hardware. Here, the Atlantic sits directly to the east and the Lake Worth Lagoon sits directly to the west, so a door takes salt exposure from both sides all year. That’s not a detail a mainland crew notices until the hinges start creaking. It’s the first thing we check.
We’ve replaced entry systems, storm doors, and French units in Palm Beach Shores condos and mid-century concrete block homes where the original aluminum jambs had pitted so badly they’d fused to the rough opening. Our technicians carry stainless steel anchor fins, marine-grade silicone, and backer rod as standard truck stock when they work this barrier island, because they’re going to need them. A live person answers our phone 24 hours a day, 7 days a week at (754) 238-2201. No call center. No voicemail tree. When a door won’t latch during a wind event, you’ll reach someone who can do something about it.
Every TruePane job in Palm Beach Shores comes with The Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway, durations stated on paper, plus our own Done Right Promise. If the door isn’t right, we make it right. No paperwork fights, no arguing about what “right” means. Replacing a door in Palm Beach Shores is a decision that’s meant to hold for decades, and we build to that timeline.
Our Door Installation Services in Palm Beach Shores
We handle the full range of residential Door Installation work on this island, but three types of doors dominate our work here: entry and swing doors that were never upgraded for the 2001 code, storm doors that protect the entry from inlet-driven rain, and arched or custom doors on the older mid-century homes where the original opening was never a standard size. Every project starts with measuring twice and a written quote on paper.
Entry & Swing Doors
Entry doors in Palm Beach Shores take the brunt of the Atlantic sea breeze on the east side and the lagoon chop on the west. A standard residential entry door here should be Energy-Efficient Windows - Palm Beach Shores spec’d, impact-rated and corrosion-resistant; a door that works fine in, say, Alafaya will show rust around the striker plate and threshold within two to three years on Singer Island. We replace entry and swing doors with frames and hardware spec’d for continuous salt exposure, not interior-grade components. That often means stainless steel hinges, hot-dip galvanized anchor fins, and a seamless threshold that doesn’t trap lagoon moisture.
Double & French Doors
Sliding & Patio Doors in Palm Beach Shores are common on condos and older homes where the living space opens toward a patio or balcony. The problem here is that the active leaf and center astragal are where wind-driven rain penetrates first, especially on west-facing units that catch afternoon thunderstorms off the Intracoastal. We set double doors with compression weatherstripping that actually maintains its shape, and we flash the perimeter the way marine construction demands. If you’re replacing a salt-degraded French door on South Ocean, this makes the difference between a door that lasts 10 years and one that needs adjustment after 18 months.
Bifold & Folding Doors
Bifold and folding doors are increasingly popular in Palm Beach Shores renovations that connect an interior room to a narrow ocean-view terrace. The challenge with these systems on a barrier island is the track. Salt air deposits fine crystalline residue on aluminum tracks, and the rollers bind. We install stainless steel track systems, not the stock aluminum, and we use rollers with sealed bearings that don’t seize after one season. It’s a different parts list than an inland city needs, and it protects the operation of the door for years, not months.
Pivot Doors
Pivot doors make a statement, and some mid-century Palm Beach Shores homes have original pivot hardware that’s now 50 to 60 years old. We install new pivot systems with marine-grade bearings and stainless steel floor closers, and we reinforce the block rough opening where the pivot carries the full weight of the slab. A pivot door on a 1960s concrete block wall needs care at the bearing point, otherwise the frame works loose within a few years of salt and wind loading. TruePane has replaced enough of these to know what the block will do, and we plan for it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach Shores
TruePane is an authorized Palm Beach Shores Pgt service installer for more than a dozen manufacturer lines. On this island, we most often recommend Andersen for impact-rated entry systems, ES Windows for custom and pivot work when the homeowner wants a specific aesthetic without giving up corrosion resistance. We keep common strike plates, roller cartridges, and weatherstripping profiles in our trucks so we can handle most Palm Beach Shores service calls without ordering parts. That’s not a convenience; it’s how we keep a door closing right for good.
Common Door Installation Problems We See in Palm Beach Shores Homes
- Steel hinge screws and striker plates rusting through within 2-3 years. This is the dual salt exposure at work. A standard steel screw in a Palm Beach Shores exterior door starts losing threads to corrosion far faster than in any inland city, and once the screws go, the door sags and won’t latch. We replace with stainless steel and marine-coated hardware as the default for this town.
- Factory weatherstripping that loses compression in under 18 months. Wind-driven rain from the Lake Worth Inlet pushes water against door thresholds with real force. Stock weatherstripping flattens and gaps, then water seeps under the door and wicks into the rough opening. We use compression-grade marine weatherstripping and upgrade the sill pan flashing on every exterior door we set here.
- Unsealed perimeter joints wicking salt-laden moisture into the rough opening. In a concrete block wall, an unsealed perimeter joint is a direct path for salt air to reach your anchor fins. We see fins that have corroded completely through, leaving frames attached only by friction and sealant. Our installs use backer rod and marine silicone at every joint, and our Palm Beach Shores crews have done enough of these to spot a failing bond before the frame pulls away in a gust.
- Condensation fog between door glass panes. Once the seal on an insulated glass unit fails, you can’t clean the fog, because it’s inside the assembly. Palm Beach Shores’s heat and humidity cycles stress these seals harder than inland Florida, and we replace the IG unit rather than the whole door whenever the slab and frame are still sound. Not every outfit will offer that; we would rather repair right than replace needlessly.
Pricing for Door Installation in Palm Beach Shores, FL
| Door Type | Typical Cost in Palm Beach Shores | Factors That Move the Price |
|---|---|---|
| Entry & Swing Door (non-impact) | $850 - $2,400 | Slab material, weatherstripping upgrade, hardware finish |
| Entry & Swing Door (impact-rated) | $2,800 - $6,500 | Miami-Dade NOA certification, size, glass package, finish |
| Double / French Door set | $2,200 - $5,800 | Impact rating, astragal and threshold upgrades, width |
| Storm Door | $850 - $2,200 | Glass type, frame material, corrosion-resistant hardware |
| Pivot Door | $3,500 - $8,500 | Slab weight, bearing hardware, custom sizing |
| Arched / Custom Door | $2,500 - $7,000+ | Template, radius, material, impact certification |
The price gap between a coastal-spec door and an inland-spec door in Palm Beach Shores is usually $400 to $1,200, depending on the unit. That’s the cost of stainless hardware, marine sealant, backer rod, and the labor to core-drill through a concrete block rough opening instead of screwing into a wood frame. You can install the cheaper spec and it will close fine for the first year or two. By year five on this island, it will sag, whistle, and let rain under the threshold. By year ten, the anchors will have corroded inside the wall and you’ll be paying for a full re-frame remove-and-reset rather than a replacement. Paying the coastal spec once is the square deal.
Call (754) 238-2201 and we’ll give you a written, line-item quote with both spec options on paper, so you see exactly what you’re buying. Estimates are free.
We Also Serve Cities Near Palm Beach Shores
In addition to our work across Palm Beach Shores and Door Installation in Palm Beach Shores, TruePane serves homeowners in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. The same coastal-spec standards apply anywhere the salt front reaches. If you’re nearby and your door hasn’t latched right in a while, the fix starts with a phone call to (754) 238-2201.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Beach Shores
West Palm Beach sits back from the coast, so its doors get one salt exposure from the east. Palm Beach Shores has the Atlantic on the east and Lake Worth Lagoon on the west along the entire residential corridor, so every door gets salt air from both sides, all year. This roughly doubles the corrosion load on hinges, striker plates, and weatherstripping, and it’s why we spec stainless hardware and marine sealants here as standard. Call (754) 238-2201 if a salt-siezed door has stopped latching; we’ll come out and tell you what it actually needs.
Yes, for any exterior door opening that’s required to meet wind-borne debris protection in Palm Beach County, the product needs a Miami-Dade NOA or equivalent Florida Product Approval. This close to the Lake Worth Inlet, that requirement applies at full coastal intensity on both the east and west elevations, not just the ocean side. An inland-spec door on a Palm Beach Shores condo is a code enforcement risk at resale and a protection gap during a storm. We walk each opening and tell you in writing whether the opening requires impact, and we only quote compliant units for the openings that do. Call (754) 238-2201 for a same-day opening-by-opening review.
The most common cause in Palm Beach Shores is salt crystallization on the aluminum track combined with the fine calcitic dust that blows off the beach. It works into the roller bearings, the bearings seize, and then the track itself galls and pits. We replace those rollers with sealed-bearing stainless units and set the new track on a bed of marine silicone, which extends the service life of a roller set from under a year to well over a decade. If you’re tired of muscling a sliding door, call (754) 238-2201 and we’ll price the roller and track replacement.
We core-drill new anchor points at 12-inch spacing, set stainless steel anchor fins into the fresh openings, and seal every perimeter joint with backer rod and marine silicone before the new frame is fixed. That’s the permanent fix for a concrete block opening where the original anchors have dissolved. We see this condition on many of the mid-century Palm Beach Shores condos and ranch homes built between the late 1950s and mid-1970s. On a recent South Ocean Avenue job, the original aluminum jamb was so salt-pitted it had fused to the block; the fix took a full afternoon of careful drilling, but the new Andersen entry system is now the most solid door in the building. Call (754) 238-2201 and we’ll assess your openings the same way.
Yes. If the door slab, hinges, and frame are sound, we can replace just the insulated glass unit rather than the entire door assembly. The fog you’re seeing is a failed seal between panes, which no amount of cleaning can correct. In Palm Beach Shores, where heat, humidity, and salt load stress IG units year-round, replacing the glazing every so often is far cheaper than replacing the whole door. We’ll tell you honestly which way to go after we see the unit in person. Call (754) 238-2201 to schedule a look.
TruePane Windows & Doors has spent years learning what salt, wind, and time do to doors in coastal Florida, and Palm Beach Shores is one of the most demanding places we work. If your entry door sags, your storm door lets in rain, or your jalousie-era opening was never upgraded to impact, call (754) 238-2201 for a free estimate. We’ll measure twice, put the numbers in writing, and stand behind the work with the Done Right Promise. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores with coastal-spec door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.