Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Port Salerno
Door installation in Port Salerno comes with a set of problems most contractors never mention until the permit is pulled and the inspector is standing in your driveway. The older concrete-block homes here, the ones built between the 1950s and 1980s, often still have original jalousie windows. Pull a permit for a new entry door, and the county inspector will flag those jalousies, and suddenly a $2,500 door job becomes a $6,000-plus window replacement you never planned for. Our Door Installation team pre-checks for that during the estimate, so the contract reflects reality before the first door comes off the truck. Call (754) 238-2201 to schedule a free estimate and get the real number on paper.
Why TruePane Windows & Doors Is Port Salerno’s Preferred Door Installation Company
We have spent years in South Florida working on exactly the kind of homes that fill Port Salerno: legacy fishing-community bungalows, concrete-block ranches, and wood-frame cottages built before impact codes existed. Led by second-generation glazier Dale Kessler, TruePane Windows & Doors takes the long view. We are not chasing the next development. We are the company that plans to be answering the phone in thirty years when a hinge pits out or a seal fails.
Our technicians work in Port Salerno regularly. They know the streets off SE Dixie Highway, the neighborhoods around the Manatee Pocket, and the pockets along Salerno Road where houses sit close to the salt. They know which homes still carry original jalousies, which door frames have been wicking salt air for decades, and which openings were never framed square in the first place. That local knowledge changes how we bid the job, because we price what the house will actually require, not what a generic quote sheet says it should.
Every technician is background-checked and uniformed. Every quote is written line by line. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave the driveway. That is The Keystone Standard, and it is backed by our Done Right Promise: if it is not done right, we make it right. No paperwork fights. No arguing. We also answer the phone with a live person, 24 hours a day, 7 days a week, because when a door will not latch at 9 p.m., you need someone who picks up.
Our Door Installation Services in Port Salerno
We install, replace, and service residential doors across Port Salerno, with a focus on the entry and storm doors that matter most in a salt-air climate. Every job starts with opening up the rough opening and checking what is actually behind the casing. In Port Salerno, that check matters more than in most Martin County towns, because the framing is often older and the salt has had decades to work on it.
Entry & Swing Doors
Entry doors in Port Salerno take a beating from two directions: the salt air from the Manatee Pocket and the afternoon downpours that blow in off the St. Lucie Inlet. We install impact-rated entry doors in standard block-home openings, marine-grade thresholds, and hardware that will not pit out in two years. A new swing door on a 1960s block home usually requires a full-frame-out replacement, because the original jamb has rotted behind the casing even when it looks solid from the front. We shim, flash, and square every opening before we hang the slab.

Storm Doors
A storm door in Port Salerno is not a decorative add-on. It is a sacrificial layer that takes the direct salt spray and keeps the main entry door from oxidizing at the hinges and lock cylinder. We stock and install marine-grade storm doors with stainless hardware, and we match the door to the existing opening rather than forcing an insert that will not sit square. Given the corrosion rates near the Manatee Pocket, we recommend stainless or marine-grade hardware on every storm door we hang here.

Double & French Doors
Double doors and French doors need more than a level and a good eye when the framing is 60 years old and has moved. Port Salerno’s concrete-block homes often have rough openings that are out of square by a half-inch or more, which is why we pull full measurements and fix the framing before we order the door. We install impact-rated double doors, French doors with active and passive panels, and multi-point locking systems that actually engage at both the head and the sill. If the active panel binds at the latch in July, the opening was never corrected, and we will not leave it that way.

Bifold & Folding Doors
Bifold and folding door systems are a bigger commitment in Port Salerno because the hardware is exposed to the same salt air that eats door thresholds. We specify stainless steel rollers, stainless hinges, and anodized or PVC frames where the track is mounted. We also pre-load the header with proper support, because folding panels put a different load on a 1960s block opening than a single swing door. If the header is undersized, we tell you before we order anything, and the fix goes on the quote, not in a surprise change order later.

Pivot Doors
Pivot doors are popular in newer Port Salerno builds and in remodels where a single oversized slab makes sense. The pivot hardware carries the full weight of the door at the top and bottom, which means the subfloor and header both need to be checked before installation. We verify floor flatness, header deflection, and the pivot point location before we spec the door. Then we install it level and adjusted so it swings without drift. On a salt-water street, we use stainless pivot kits, because a seized pivot is a door that will not move.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Salerno
We are an authorized installer for more than a dozen manufacturer lines, and for Port Salerno’s conditions we most often quote CGI, PGT, and ES Windows for impact-rated doors and frames. These manufacturers build products that hold up under Martin County’s wind-borne debris requirements and the salt exposure that comes with living near the Manatee Pocket. We quote side by side on paper, so you see the product, the warranty, and the price for each option. Then we register both warranty layers in writing before the truck leaves your driveway. We also keep common hardware and threshold replacements on hand for Port Salerno customers, which shortens turnaround when corrosion has killed a hinge or a lock cylinder.
Common Door Installation Problems We See in Port Salerno Homes
- The jalousie code trap. Pull a permit for a new entry door, and the county inspector will flag every non-impact jalousie window in the house. This turns a single-door project into a whole-home impact window replacement, adding anywhere from $4,000 to $10,000 in unplanned scope. We pre-check for jalousies during the estimate so the contract reflects the full job before you commit.
- Salt-damaged framing behind the casing. Salt-laden air from the Manatee Pocket wicks into wood jambs and rots the bottom rail behind the casing, even when the visible wood looks fine. Standard aluminum thresholds pit out within two years. We pull the casing during the estimate when the home is close to the water, and we quote marine-grade PVC or treated framing when the rot is there.
- Undersized or out-of-square rough openings. Many 1960s block homes in Port Salerno have openings that were never framed square, or have shifted over decades. A new swing door hung on that opening will bind at the latch and leak during summer downpours. Full-frame-out replacement with shim correction is the only fix that lasts.
- Lock cylinders and hinges that seize from salt. We regularly replace corroded lock cylinders and pitted hinges on doors that are only a few years old. This is not a defect in the door. It is what happens when standard hardware is installed in a salt-air environment. We specify stainless or marine-grade hardware on every Port Salerno door we hang, and we stock those parts locally.
Pricing for Door Installation in Port Salerno, FL
Here are straight numbers for Port Salerno’s market, based on the work we have bid and completed on homes here.
- Entry & swing door replacement (impact-rated, standard block-home opening): $2,800 to $6,500 installed, depending on material, glass package, and whether the existing jamb must be fully replaced.
- Storm door installation (marine-grade, stainless hardware): $900 to $2,200 installed.
- Double or French door installation (impact-rated, both panels): $5,500 to $12,000 installed, with full-frame-out correction where needed.
- Full-frame-out replacement with jamb reconstruction and flashing: add $800 to $2,500 to the door cost, depending on the rot and the size of the opening.
- Jalousie window replacement triggered by a door permit (impact casements): $4,000 to $10,000 depending on count and size. This is the cost most homeowners do not see coming, and it is exactly why we pre-check before quoting.
Every quote is a written line-item price. You approve any change order in writing before we cut, and the number we quote is the number you pay. Call (754) 238-2201 to schedule a free estimate and get your real numbers.
We Also Serve Cities Near Port Salerno
TruePane Windows & Doors handles Door Installation in Port Salerno and the surrounding Martin County communities, including Stuart, Hobe Sound, Palm City, and Jensen Beach. Dispatch and scheduling are coordinated from our South Florida office, with crews serving Port Salerno locally. If you are just down 76 toward the beaches or up US-1 toward Stuart, the same team and the same warranty apply.
Serving Port Salerno, FL - Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Port Salerno
Because Martin County follows Florida Building Code wind-borne debris rules, and the moment a permit is opened for any structural or renovation work, the inspector will flag every non-impact jalousie window in the house. Those original single-pane aluminum jalousies from the 1950s through 1970s are no longer code-compliant, and the county can red-tag the job until they are replaced with impact-rated glazing. This is not a contractor upselling you. It is the code doing exactly what it is written to do. We pre-check for jalousies before we quote the door, so you get the full number up front instead of a $4,000 to $10,000 surprise after the walls are opened. Call (754) 238-2201 to get an estimate that anticipates this.
Yes, and we would not install anything less in Port Salerno. The salt air from the Manatee Pocket does not stop at the waterfront. It travels several blocks inland and settles on hinges, lock cylinders, and thresholds. Standard aluminum hardware will pit and seize within two years in many areas of Port Salerno. Stainless or marine-grade hardware costs a little more on the front end and saves you a hardware replacement in a few years. We quote it as standard on every Port Salerno door job.
Usually not in Port Salerno, and we will not know for certain until we pull the casing. The rot from years of salt-air wicking happens behind the casing, at the bottom rail, where you cannot see it. We have pulled doors on 1962 block homes near the Manatee Pocket where the jamb looked fine from the front and crumbled in our hands behind the trim. If the frame is solid after inspection, we will re-use it and tell you so. If it is not, we will show you the rot and quote the full-frame replacement in writing before we do the work.
Before we cut anything, you get the plan in writing. If we open the wall and find something the original quote did not cover, such as a rotted header, undersized framing, or a jalousie inspection the county was not going to pass, we write a change order. You see the added cost in writing, approve it in writing, and then we continue. We do not do surprise line items. Our Done Right Promise applies to the whole job, including any approved change orders, and both warranty layers get registered before we leave the driveway. Call (754) 238-2201 and we will walk you through it.
Yes. Most of Port Salerno’s 1950s through 1980s block homes have standard rough opening sizes that stock impact doors can fit, but the framing and the condition of the jamb determine whether an insert works or a full-frame-out is required. We keep standard-size impact door inventory and we replace frames only when the structure requires it. During the estimate, we measure the actual opening and check the jamb, then we tell you what fits and what needs to be rebuilt. The quote reflects the house as it is, not a catalog fantasy.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Salerno and Martin County with a second-generation glazier’s commitment to work that stays done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After