Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Shady Hills
Door installation in Shady Hills runs $800-$3,200 for most entry and storm door work, depending on whether your home is site-built or manufactured. We dispatch crews into Shady Hills weekly from our South Florida coordination office, so we know the road patterns off Shady Hills Road, County Line Road, and the rural stretches where lots get wide and the next neighbor is a pasture over. That local familiarity matters when a door jamb has been rotting for twenty years and the homeowner just wants to know what it’ll actually cost to set it right. Call (754) 238-2201 and a live person answers, any hour, any day.
Why TruePane Windows & Doors Is Shady Hills’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008, but the trade knowledge runs back through two generations of glazing work, and the crews we send into Shady Hills are trained the old way: measure twice, set the frame true, register both warranty layers in writing before leaving the driveway. We do not send subcontractors into Pasco County. Every technician is background-checked, uniformed, and answers to us. Our Door Installation team works on site-built ranches and manufactured homes in the same week, and that dual-product fluency is not common. Most shops pick one line and force the other to fit. We stock HUD-labeled doors and FBC-approved impact-rated units, because Shady Hills demands both, often on the same road.
Local homeowners here tend to keep their houses for decades. That changes the conversation. They are not asking for the cheapest bid that’ll get them through one hurricane season. They want a door that will still close square in July, a frame that will not rot from the bottom up, and a company that will still answer the phone if something goes wrong. We stand behind the work. The Done Right Promise says it plainly: if it is not done right, we make it right, no paperwork fights, no arguing. And The Keystone Standard means both manufacturer warranty layers get registered with their durations stated, in your hand, before the truck pulls away.
Our Door Installation Services in Shady Hills
Entry & Swing Doors
Entry door work in Shady Hills usually starts with one of two discoveries. On site-built ranches from the 1970s through 1990s, the original aluminum threshold has been wicking slab moisture into the jamb for years, and the bottom six inches are powder. On manufactured homes, the rough opening is often 74 or 76 inches tall, not the standard 80, and somebody shimmed it hard years ago. We quote both scenarios honestly, replace the pan flashing, and set a door that swings true the day we leave and a decade later.
Storm Doors
Storm doors in Shady Hills take a beating from Gulf-driven humidity and afternoon thunderstorms that arrive in minutes. Older single-pane aluminum storm doors with corroded pivot clips and failed glazing putty leak wind-driven rain into the primary door frame. By the time the sill starts to feel soft, the rot is already behind the casing. We replace storm doors with corrosion-resistant frames and seal the opening correctly, so the outer door protects instead of feeding the problem.
Arched & Custom Doors
Shady Hills has enough older ranch homes with arched entryways and non-standard openings that custom work is common. Whether it is an arched wood door on a 1980s build or a custom fiberglass entry on a newer site-built home, we measure the rough opening twice, order to spec, and set the frame without field-gapped shims. A custom door that is out of plumb by a quarter inch will bind in July and leak in August. We do not leave until the pane is true and the reveal is even, top to bottom.
Double & French Doors
French and double doors in Shady Hills face a specific problem: the wider the opening, the more opportunity for wind-driven rain to find the seam. Older double-door installations on area homes often have sagging leaves and worn weatherstripping that let Gulf storms push water across the threshold. We install double doors with continuous flashing, reinforced astragals, and stainless hinges that do not corrode in this humidity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shady Hills
We are authorized installers for more than a dozen manufacturer lines, and for Shady Hills work we lean on brands that hold up to inland salt-humidity. Milgard fiberglass entry doors resist the jamb corrosion we see constantly here. PGT and CGI impact-rated doors meet Florida wind-load code for site-built homes. For manufactured homes, we spec HUD-labeled units rather than forcing a standard residential door into a non-standard opening. We quote side by side on paper so you see exactly what you are buying, and we register both warranty layers before we leave.
Common Door Installation Problems We See in Shady Hills Homes
- Rotted bottom jambs from threshold corrosion. The original aluminum threshold sits directly on the slab, and Pasco County humidity plus summer rain wicks moisture up into the wood. The bottom six inches rot, the door binds, and leaks follow. We cut out the rot, replace the pan flashing, and set a threshold that sheds water instead of drinking it.
- Manufactured-home doors retrofitted with shim piles. HUD-labeled doors use narrower jambs and different hinge spacing than standard residential units. When a handyman forces a standard door into a 74-inch manufactured rough opening, the gap gets shimmed, the slab flexes, and wind-driven rain finds the opening. We install the right HUD-labeled door for the opening.
- Storm door failures feeding hidden sill rot. On a 1980s ranch off Shady Hills Road, our tech found the original aluminum entry door’s jamb so corroded that the strike plate screws had stripped clean out, leaving the door sagging and dragging. The homeowner had called for a simple hinge adjustment. The rot had already spread into the rough opening. We installed a Milgard impact-rated fiberglass entry door with a fusion-welded frame, stainless hinges, and flashing tape over the new pan flashing.
- Single-pane aluminum doors with failed glazing. Pre-2002 aluminum storm doors and side lights in Shady Hills routinely have corroded pivot clips and rotted glazing putty. The glazing fails, water gets behind the frame, and the primary door’s wood frame starts to rot from the inside. By the time it is visible, replacement is usually the honest recommendation.
Pricing for Door Installation in Shady Hills, FL
| Service | Typical Shady Hills Range |
|---|---|
| Entry door (site-built home, standard) | $1,200 - $2,800 |
| Entry door (impact-rated, FBC-approved) | $2,200 - $3,800 |
| Manufactured-home HUD-labeled door | $800 - $1,500 |
| Storm door replacement | $600 - $1,400 |
| Custom or arched entry door | $2,500 - $5,500 |
| Double / French door installation | $2,000 - $4,500 |
These are the ranges we quote in Shady Hills for typical jobs. The split between site-built and manufactured pricing is real, and it is one reason to work with a company that does both. A cheap inland-spec door with zinc hardware will corrode here within a decade; the coastal-spec version with stainless hinges and a composite threshold costs more up front and less over time. We write line-item quotes, no change orders, and the price we quote is the price on the bill. Call (754) 238-2201 for a free estimate on your specific opening.
We Also Serve Cities Near Shady Hills
Beyond Shady Hills, our crews cover Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are in one of those communities and need door installation, call (754) 238-2201 and we will schedule a time that works. Same team, same warranty written down, same standard.
Serving Shady Hills, FL - Our Local Coverage Area
We’re based in the Shady Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Shady Hills
Yes, you need a HUD-labeled door for a manufactured home in Shady Hills. HUD-labeled doors are built for narrower jambs and different hinge spacing than standard residential units, and using a standard door means shimming the rough opening, which eventually allows wind-driven rain through the gaps and warps the slab. We spec HUD-labeled units for manufactured homes and FBC-approved impact-rated doors for site-built ranches, often on the same day in the same neighborhood. Call (754) 238-2201 and we will tell you exactly which product your opening needs.
It is the persistent Gulf-driven humidity, even at 15 to 20 miles inland. The air stays humid through most of the year in Pasco County, and the original aluminum thresholds sitting directly on the slab create a galvanic corrosion point where moisture climbs up into the frame. Summer thunderstorms push wind-driven rain through deteriorated seals, and the corrosion accelerates. We replace with composite thresholds, stainless steel fasteners, and flashed openings that break that moisture path. Call (754) 238-2201 for an assessment.
Full replacement is usually the honest answer. Jalousie pivot clips and glazing putty on older Shady Hills storm doors are largely discontinued, and once the glazing fails, water gets behind the frame and rots the primary door’s wood frame. A repair attempt often costs nearly as much as a new storm door and lasts a fraction as long. We will give you the straight number either way. Call (754) 238-2201 and we will look at it.
Fiberglass with a fusion-welded frame and stainless hardware holds up best in Shady Hills. It does not absorb moisture like wood, it does not corrode like aluminum, and it handles the humidity swings and wind-driven rain of Pasco County. For impact protection on site-built homes, we spec Milgard, PGT, or CGI impact-rated fiberglass doors, depending on your opening and budget. Call (754) 238-2201 and we will quote the right spec for your house.
No, there is no shortcut. Florida’s post-2002 Building Code requires impact-rated glazing or an approved alternative for site-built homes, and Shady Hills falls under that wind-load requirement. We install FBC-approved impact-rated doors with the glazing rated for your specific wind zone, and we register the manufacturer warranty layer that covers the glazing. The cheap workaround that skips the rating will fail an inspection and leave you liable. Call (754) 238-2201 to get the code-compliant spec for your opening.
Get Your Door Installed Right in Shady Hills
Dale Kessler and the TruePane crews have been setting doors in Florida since 2008, and the founding rule on the whiteboard has not changed: if the pane is not true, the job is not done. In Shady Hills, that means a door that clears its threshold in August, a frame that does not rot from the bottom, and hardware that does not corrode by the third storm season. We quote it on paper, we stand behind it in writing, and a live person answers when you call. Call (754) 238-2201 today to schedule your free estimate for door installation in Shady Hills.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.