Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Taft
Door installation in Taft means working with Orange County’s permitting system and Florida’s inland wind codes, and we’ve been doing exactly that for years. We also install Impact Windows & Doors in Taft. Most Taft homeowners learn the hard way that pulling an Orlando permit doesn’t fly here – the Orange County Building Division handles every replacement, and they check the numbers. If your entry door has glass panels facing west or south, it needs an SHGC rating of 0.25 or lower to pass inspection, and that’s not something every installer verifies before ordering the unit. We do. Call (754) 238-2201 and we’ll walk you through what your Taft home actually needs.
Why TruePane Windows & Doors Is Taft’s Preferred Door Installation Company
We’re not a franchise rolling through Taft with a sales brochure. TruePane was founded by second-generation glazier Dale Kessler in 2008, and our crews treat every door replacement in this community like it’s going into our own mother’s house. The difference shows up in the details: we measure every opening twice, we quote manufacturer lines side by side on paper, and we register both warranty layers in writing before the truck leaves your driveway.
Taft homeowners call us because we know what inspectors here actually look for. Orange County flags SHGC violations on south- and west-facing door glass more than almost anything else, a direct result of the flat, open land around Taft with minimal shade canopy. That afternoon sun beats on your door for hours. If the glass package isn’t right, you’ll know it when the inspector walks out shaking his head. We spec it correctly the first time.
Our Door Installation team works throughout Taft every week, from the ranch homes near W. Taft Vineland Rd to the manufactured-home lots off Orange Blossom Trail. We schedule around your life, arrive when we say, and finish most single-door replacements in one visit. A live person answers the phone 24 hours a day, 7 days a week. No voicemail tree, no callback form.
Our Door Installation Services in Taft
Entry & Swing Doors
Entry doors in Taft take a beating from humidity and sun. The original wood jambs on 1950s-1970s concrete-block ranches are often rotted behind the trim, which is why a simple slab swap frequently turns into a full frame replacement once we open the wall. We rebuild rough openings with composite jambs and flashing tape, then set a fusion-welded steel or fiberglass unit that won’t swell or sag. For Taft’s manufactured homes, we order non-standard rough-opening sizes that big-box stores don’t stock.
Storm Doors
A storm door in Taft isn’t just about letting air through. It’s your first line of defense against afternoon UV and the daily humidity cycle that grinds wood components down. We install heavy-gauge aluminum and vinyl storm doors with full-view and retractable-screen options, and we make sure the closer hardware is corrosion-resistant. The wrong hardware turns stiff and squeaky within two seasons here.
Arched & Custom Doors
Some of the nicest mid-century details in Taft are arched entry openings, and very few companies still measure, template, and order true radius doors. We do. We’ve installed custom arched mahogany, fiberglass with radius glass, and fully custom units that match the original character of the home while meeting Florida’s current energy and wind codes. If you want a new door that looks like it belonged there in 1962, we can deliver that.
Double & French Doors
Double doors and Sliding & Patio Doors - Taft homes usually mean a rear patio opening or a converted carport. The big problem we see is sagging – the active leaf drops, the astragal drags, and eventually the lockset won’t line up. We fix it by rebuilding the hinge-side jamb, upgrading to heavy-duty hinges rated for the door weight, and setting the unit level and plumb so it works ten years from now, not just on install day.
Bifold & Folding Doors
Folding door systems are showing up more in Taft as homeowners enclose patios and open up interior walls. These units demand absolutely level floors and square openings, and Taft’s older slab-on-grade homes often have settled floors that need shimming before the track goes in. We handle the full install – track, panels, hardware, flashing – and we make sure the operation feels smooth on day one and day one thousand.
Pivot Doors
A pivot door is a statement piece, and Taft homeowners install them because they want something no one else on the block has. The pivot hinge carries the entire weight of the door on the top and bottom, which means the framing has to be reinforced correctly. We see DIY pivot installs fail within a year when the header wasn’t engineered for the load. We do it properly, and we register both warranty layers before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taft
We’re an authorized installer for, PGT, CGI, and ES Windows, among others. For Taft’s climate and code environment, we’ve had particularly good results with Andersen’s low-E glass packages and Milgard’s fusion-welded frame construction. We also work with ES Windows on custom and impact-rated units, ECO Window Systems for Energy-Efficient Windows in Taft, and ViewLux when a homeowner wants a specific aesthetic at a more approachable price. Parts and service for all three brands are available to Taft customers with minimal lead time.
Common Door Installation Problems We See in Taft Homes
- Rotted wood jambs and sills. Central Florida’s near-daily summer humidity cycling infiltrates the wood frame around your door, and once rot sets in, the lockset sags and the strike plate misaligns. Taft’s older CBS ranch homes are especially prone to this because the original door openings were framed with untreated lumber.
- Failed SHGC ratings on glass doors. South- and west-facing doors with glass panels fail Orange County energy inspections when the Solar Heat Gain Coefficient exceeds 0.25. Taft’s flat, treeless lots mean there’s no shade canopy to protect that glass from afternoon solar load, so the code number matters more here than in tree-covered neighborhoods.
- Wrong permit pulled from Orlando. Taft is unincorporated Orange County, so a permit pulled through an Orlando city office gets rejected by the Orange County Building Division. That delay can push an installation back by two weeks or more, and it’s avoidable if you know the right office to file with.
- Corroded hardware from humidity and rain. Locksets, hinges, and closers that aren’t corrosion-resistant turn stiff, pitted, and noisy in this climate. We specify stainless or marine-grade hardware on every Taft install so you’re not replacing a $40 deadbolt every other year.
Pricing for Door Installation in Taft, FL
Door installation prices in Taft depend on what you’re replacing and what the opening looks like once we remove the old unit. A standard entry door slab swap on a 1960s ranch typically runs $900 to $1,400, while a full frame replacement with a fiberglass door and composite jamb lands between $1,800 and $2,800. Storm doors in Taft run $450 to $900 installed. French or double doors start around $2,500 and climb to $6,000 or more for wide openings with custom glass. Custom arched doors start at $3,500 and go up from there, depending on species, glass, and finish.
The variables that move the price: whether the rough opening needs rebuilding, whether the door has glass that must meet SHGC requirements, and whether your home is slab-on-grade or has a rim joist. We give you a written line-item quote before work starts, and the price doesn’t change unless you change the scope. Call (754) 238-2201 to schedule a free estimate, and we’ll measure everything on the first visit.
We Also Serve Cities Near Taft
Our Door Installation crews work in Taft daily, and we regularly schedule projects in nearby communities including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re in one of those areas and need a door replaced, call (754) 238-2201 and we’ll put you on the schedule with the same team that serves Taft.
Serving Taft, FL - Our Local Coverage Area
We’re based in the Taft area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Taft
No, you can’t assume an Orlando spec passes in Taft. Taft is unincorporated Orange County, so your permit goes through the Orange County Building Division, and the wind-speed design-pressure rating is different from coastal or Orlando-city requirements. Any door with glass facing south or west must meet an SHGC of 0.25 or lower. If a contractor prices you an “Orlando suburb” door without checking those numbers, you’re likely looking at a failed inspection. Call (754) 238-2201 and we’ll spec it for Taft’s codes the first time.
Only if the glass package has an SHGC rating of 0.25 or lower. The flat, open land around Taft has almost no shade canopy, so west-facing door glass takes unobstructed afternoon sun, and Orange County inspectors check the SHGC on every replacement. Standard clear glass won’t pass. Low-E coated glass packages usually will, depending on the manufacturer. We verify the rating before we order the unit, and we’ll show you the spec sheet. Call (754) 238-2201 to check your specific door.
Original jalousie doors on Taft’s older concrete-block ranches are energy-code noncompliant under the current Florida Energy Code’s U-factor and SHGC requirements, and weatherstripping won’t fix that. You’re losing conditioned air through the glass louver gaps every day, and the frame is typically corroded at the corners. A replacement with a modern insulated door and proper weatherstripping pays for itself in lower cooling bills within a few years. We’ll pull the old unit, inspect the rough opening, and give you a straight answer on what needs replacing. Call (754) 238-2201 for a free estimate.
Stainless steel and marine-grade hardware survive Taft’s humidity best. Standard zinc or powder-coated steel hardware pits and corrodes within a couple of years here because of the near-daily summer humidity and regular rain. We specify stainless steel hinges, strike plates, and threshold screws on every install, and we recommend locksets with corrosion-resistant finishes for the exterior side. We’ll quote the hardware as a line item so you know exactly what you’re paying for.
Yes, every door replacement in Taft requires a permit through the Orange County Building Division, even if you’re only swapping the slab and keeping the existing frame. That’s because the building department verifies the replacement door meets the Florida Building Code’s wind and energy requirements for this inland zone. Skipping the permit can create problems when you sell the home, and unpermitted door work gets flagged on inspection reports. We pull the permit for every job, schedule the inspection, and make sure it passes. Call (754) 238-2201 and we’ll handle the paperwork.
Schedule Your Free Door Installation Estimate in Taft
We replaced the original jalousie entry on a 1960s concrete-block ranch near W. Taft Vineland Rd with a Milgard Tuscany door using a fusion-welded frame and low-E glass. The old jamb had rotted from years of Central Florida humidity cycling, so we rebuilt the rough opening with flashing tape and a composite jamb before setting the new unit. That’s the kind of work we do in Taft every week. If your door is sagging, sticking, failing inspection, or just showing its age, call (754) 238-2201 today. We’ll measure the opening, quote the right door for your home and Taft’s codes, and give you a written price before anything is ordered. Free estimates, no pressure, and a Done Right Promise on every job. The Keystone Standard means both warranty layers get registered in writing before we leave your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale is a second-generation glazier who founded TruePane in 2008 and has spent years in the glass and door trade, working with homeowners across Central Florida to install doors that hold up to the region’s climate and codes.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.