Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across University
Energy-efficient window replacement in University, FL typically runs $850-$2,400 per opening installed, with most full-home projects landing between $9,000 and $22,000 depending on product line and wind-load rating. The work usually takes two to five days once permits clear, and the single biggest cost driver is whether the unit must meet Hillsborough County’s wind-borne debris code, which nearly every replacement in University does. If you’re looking at fogged glass, leaking jalousies, or original aluminum frames that sweat and drip onto drywall every summer afternoon, call (754) 238-2201 for a free estimate on Window Installation in University. We know this territory well because we replace windows in University’s rental corridors and ranch homes week after week, and we know exactly where the old stock fails first.
Why TruePane Windows & Doors Is University’s Preferred Energy-Efficient Windows Company
TruePane was founded by second-generation glazier Dale Kessler, and the rule on his whiteboard still governs every install we make in University: if the pane is not true, the job is not done. That matters here more than most places, because University’s housing stock from the 1960s and 1970s was built to student-occupancy minimums. Original jalousie and single-pane aluminum windows dominate whole blocks. When we quote a replacement in University, we’re not just swapping glass. We’re correcting forty or fifty years of deferred maintenance, humidity damage, and code non-compliance in one visit.
Customers in University keep our phone number because a live person answers it 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. When a summer storm blows water through old louvers on 131st Avenue, someone picks up and schedules a look. Our technicians are background-checked and uniformed, and they measure every opening twice before ordering anything. Both manufacturer warranty layers get registered in writing before our truck leaves the driveway. That’s The Keystone Standard, and it applies to every job we do in University, no exceptions.
We are an authorized installer for more than a dozen manufacturer lines, including CGI, PGT, so the quote you get in University reflects actual side-by-side comparisons on paper, not whatever a distributor happened to have in stock. We’ve been doing this work long enough to know that a cheap window set into a rotted University jamb is a future callback. We’d rather do it right the first time and stand behind it with our Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing.
Our Energy-Efficient Windows Services in University
Impact-Rated Glazing for Wind-Borne Debris Compliance
Hillsborough County sits inside Florida’s wind-borne debris region, and that designation changes what a legitimate window quote looks like in University. Every replacement must either carry impact-resistant glazing or be protected by an approved shutter system. Most University homeowners choose impact-rated glass because it does double duty: it satisfies the code requirement and it delivers real thermal performance. A typical impact-rated single-hung or slider in University runs $1,100-$1,800 per unit installed for a mid-grade product, more if you step up to a premium line like CGI or PGT.

Low-E & Argon Gas Glass
Low-E coatings paired with argon-filled insulated glass are what turn a code-compliant window into an energy-efficient one. In University, where afternoon convective storms hammer east-facing windows with wind-driven rain and the summer sun loads the west side of every 1970s rancher, the right low-E package cuts heat gain measurably. We quote these options side by side on paper so you can see the cost per window and the performance difference before you commit. A low-E argon upgrade typically adds $60-$90 per window over standard insulated glass and usually pays for itself within three to five cooling seasons.

ENERGY STAR Replacement Windows
ENERGY STAR-rated windows for Florida’s Southern climate zone need a U-factor of 0.40 or lower and an SHGC of 0.25 or lower to qualify. When we replace windows in University, we specify to those numbers as the floor, not the ceiling, because the humidity here punishes anything less. A standard ENERGY STAR vinyl replacement window in University runs $850-$1,200 per opening installed. Aluminum with a true thermal break runs higher, usually $1,000-$1,400. For older homes near the USF campus that still carry original jalousie units, the jump to a properly rated ENERGY STAR window is the single largest comfort upgrade a homeowner or landlord can make.

UV-Blocking & Fade Protection
University gets more than 240 days of strong sun per year. Hardwood floors, furniture, and framed photos in west-facing rooms fade faster here than homeowners expect. UV-blocking low-E coatings reduce that damage substantially, and they’re a standard option on most of the lines we install. In University’s rental stock, where tenants cycle through and furniture gets moved against windows for months at a time, fade protection also protects the owner’s interior finishes. Expect to pay $50-$80 more per window for a premium UV-blocking coating, and expect it to preserve what is already inside your home.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in University
We install and service more than a dozen manufacturer lines, and for University specifically we keep strong inventory access on CGI and PGT impact products because those are what Hillsborough County’s wind-load code demands. We also quote Custom Windows & Doors - University homeowners regularly. We also regularly quote and install CWS and ES Windows for homeowners who want higher-end thermal performance or specific aesthetic profiles. Because we maintain relationships with these manufacturers and stock common parts locally, turnaround on service work in University is faster than what you’ll get from a contractor who has to order everything from a distant distributor. When you call for a quote, you’ll see real product options side by side on paper, with the warranty durations stated in writing.
This page is about Energy-Efficient Windows, and if you’re in University you’re reading the version written for this specific market, not a generic national page. We serve University with crews that know the difference between a 1968 jalousie conversion and a 1990s vinyl retrofit before they even park the truck.
Common Energy-Efficient Windows Problems We See in University Homes
- Jalousie glass louvers leaking at every pivot during afternoon storms. These original aluminum units offer almost no wind-load or water resistance. Summer thunderstorms in University drive rain horizontally, and the result is wet drywall at every window on the storm side. The fix is a jalousie-to-impact-slider conversion, and we do more of these in University in a single week than most Tampa metro contractors see in a quarter.
- Condensation on interior aluminum frames dripping onto drywall. Original 1960s aluminum windows have no thermal break. When the AC runs cold inside and Florida humidity presses against the glass outside, water forms on the metal and runs down. In University’s student rentals, that drip soaks carpet and drywall, and mold follows within a season. The permanent fix is a thermally broken frame with insulated glass.
- Fogged double-pane glass from failed seals. When the seal between two panes fails, moisture gets in and clouds the glass. You can’t clean it, and the window loses most of its insulating value. In University, a fogged pane in an otherwise sound frame can often be replaced as a glass-only repair at $250-$550 per pane, which is substantially less than a whole new window.
- Single-pane aluminum sliders that bind or fall out of track. After decades of humidity and settlement, the jambs on original sliders in University’s ranch homes warp. The sash binds, the lock won’t engage, and the window becomes both an energy leak and a security risk. The repair path depends on the frame condition, but a compliant replacement often costs less than repeated band-aid fixes over even two years.
Pricing for Energy-Efficient Windows in University, FL
A glass-only repair on a fogged or cracked pane in University runs $250-$550 per pane. A standard ENERGY STAR vinyl replacement window runs $850-$1,200 per opening installed. Impact-rated windows needed for Hillsborough County wind-borne debris compliance run $1,100-$1,800 per opening for mid-grade product, and premium lines from CGI, PGT, or Marvin start around $1,400 and climb from there depending on size and finish. Whole-home replacements in University’s typical 1960s-1970s rancher land between $9,000 and $22,000. What moves the number: frame material, impact rating, low-E package, and how much jamb repair the old frames require after fifty years of subtropical humidity. Every quote we write is a fixed line-item price. The number on the quote is the number on the invoice. Call (754) 238-2201 for a written quote at no charge, and the estimate visit is free.
We Also Serve Cities Near University
In addition to University, our crews cover Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you own a rental in University and a home in one of the surrounding communities, one call handles both. The same warranty terms and the same Done Right Promise apply wherever the job is.
Serving University, FL - Our Local Coverage Area
We’re based in the University area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in University
Yes. Replacing a jalousie window with an impact-rated slider in University requires a building permit through Hillsborough County, and the completed install must pass a wind-load inspection. That’s true for nearly every window replacement in this area because University sits inside the county’s wind-borne debris region. We pull the permit, schedule the inspection, and stand behind the work. If the inspector flags anything, we correct it under our Done Right Promise. Call (754) 238-2201 and we’ll walk you through the exact steps for your property.
For University’s Southern climate zone, target a U-factor of 0.40 or lower and an SHGC of 0.25 or lower. Those numbers are the federal ENERGY STAR baseline for our region, but a window that just barely meets them will underperform through a Florida summer. We spec most University replacements to a U-factor around 0.27-0.30 and an SHGC around 0.20-0.23 because the combination of heat and humidity here is brutal. The exact product depends on the exposure: west-facing windows on a 1970s rancher need more aggressive solar control than shaded north-facing ones. Call (754) 238-2201 for a product-specific recommendation in writing.
Yes, in most cases. Installing impact-rated windows with documented wind-mitigation compliance can reduce the windstorm portion of a homeowner’s insurance premium in Florida, and on older University rental properties with original jalousies or single-pane aluminum, the difference can be meaningful. The key is documentation. Insurers want proof that the units are impact-rated, properly installed, and inspected. That’s exactly what The Keystone Standard covers: both manufacturer warranty layers registered in writing, the permit closed, and the inspection passed. Call (754) 238-2201 to talk through what your specific policy may recognize.
Fog between the panes means the window’s seal has failed, and moisture is now inside the insulated glass unit. You cannot clean it away. The window loses most of its thermal performance once the seal is gone, and in University’s humidity the problem tends to spread from one unit to the next within a few years. Glass-only replacement for a fogged pane runs $250-$550 per unit, which makes sense when the frame is still square and functional. If the frame is original 1960s aluminum with no thermal break, replacing the whole window is the better long-term call. Call (754) 238-2201 and we will assess the condition honestly.
Yes, existing jalousie windows can remain in place if you are not touching that opening, because code enforcement for existing stock is limited. But they remain non-compliant with current Florida Building Code wind-load requirements, they leak during every summer storm, and they offer essentially zero thermal or security value. In our experience working the rental corridors near USF, leaving jalousies in place while replacing other windows means the same wind-driven water problems simply move to the untreated openings. Most University owners eventually convert every jalousie opening to an impact-rated slider or fixed unit so the entire property is uniformly protected. Call (754) 238-2201 for a full-property assessment and a written plan that phases the work if needed.
We replace and service windows in University with a crew that knows this housing stock, the inspections, and the storm season, and we also install University Glass Railing Systems. If you have questions about what your windows need to meet Hillsborough County code, or you want a fixed written quote, call (754) 238-2201. The estimate is free, and a live person answers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving University with honest window and door work since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After