Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Fern Park
Impact window and door replacement in Fern Park runs $850-$2,400 per opening for most concrete-block ranch homes built between 1955 and 1975, with full-frame work on original jalousie or aluminum single-pane units at the higher end. That’s the honest range we quote before anyone picks up a saw. TruePane has done this work on the US-17-92 corridor long enough to know what’s behind those stucco walls, and it’s rarely what the homeowner expects. Call (754) 238-2201 and we’ll walk the house with you, measure every opening twice, and put the real number on paper.
Fern Park sits unincorporated in Seminole County. That single fact changes how your permit gets filed, how your inspection gets scheduled, and how long the job takes. Contractors who mostly work Casselberry or Altamonte Springs file city paperwork out of habit. We don’t. We’ve pulled enough Seminole County permits to know exactly what the building department will ask for when we open a 1960s block wall for impact glazing. That’s the difference between a job that closes on schedule and a job that stalls for three weeks waiting on a permit correction.
Why TruePane Windows & Doors Is Fern Park’s Preferred Impact Windows & Doors Company
We’re a second-generation glazier’s shop, founded by Dale Kessler in 2008 on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. Fern Park homeowners call us because the house they’ve lived in for thirty years deserves work that holds up for the next thirty. We don’t rush the measure, we don’t guess at the rough opening, and we don’t hand you a bill with surprises on it.
Our crews know the Fern Park housing stock. Concrete block, single-pane aluminum, jalousie units in the Florida room, hollow-core doors that have been binding in the July humidity since Carter was in office. We’ve worked the neighborhoods along Lake of the Woods and the streets off Harland Court, and we know what the county inspector will flag before we open the first wall. A live person answers our phone 24 hours a day, 7 days a week. Not a routing service. A person who can tell you when the crew can be at your Fern Park address.
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI, and we write both warranty layers into the contract before the truck leaves the driveway. That’s The Keystone Standard, and it’s not a marketing phrase. It’s a sheet of paper with both durations on it, signed, and handed to you. The Done Right Promise sits behind it. If something’s not right, we make it right. No paperwork fight, no fine print.
Our Impact Windows & Doors Services in Fern Park
Hurricane Impact Windows
Most Fern Park ranches still have their original single-pane aluminum frames, and after fifty or sixty years of 75% humidity, those frames are oxidizing behind the stucco. We replace them with impact-rated units sized to the opening, not to whatever’s on a shelf. In the concrete-block homes along Orchard Drive and the side streets off SR 436, the rough openings are often a half-inch off from any standard size, so we order custom units rather than forcing a square window into a wall that’s not square. The county’s wind-load requirements for inland Seminole still apply, and we design to them.
Impact Sliding Glass Doors
The original sliding doors in Fern Park’s 1960s ranch homes were built light. Aluminum tracks, thin glass, rollers that haven’t been replaced since the first owner. An impact-rated slider is a different animal entirely, heavier glass, reinforced frame, and an opening that often needs reframing because the original header was undersized even for the load it had. We handle the structural correction as part of the job, priced in writing before we touch the wall. Homes near Prairie Lake and along the east side of US-17-92 see the same wind-driven summer rain as everyone else, and a slider that flexes under storm pressure is the first place water finds a way in.
Impact Entry & French Doors
Fern Park’s original doors are mostly hollow-core steel or louvered wood. They rust at the bottom rail, swell in the wet season, and warp out of true. An impact-rated entry door changes the whole front of the house, and it also changes the rough opening. Block homes from the 1960s often have openings that were framed to fit whatever door was on sale at the builder supply that week, so we plan for header work and masonry adjustment. French doors in Florida rooms require the same treatment: the jamb has to carry the load, not just look good on the trim line. We pull the county permit, we do the structural correction, and we register both warranty layers in writing.
Impact Garage Doors
Attached garages in Fern Park are common, and the garage door is the largest single opening in the house. A non-rated door under wind pressure can bow inward, pull its tracks, and take part of the wall with it. Impact-rated garage doors for this area typically run $2,800-$5,500, including reinforcement posts and new track assemblies. The county reviews garage door mounting as part of the whole opening protection requirement, so we make sure the header, the jambs, and the track anchors all pass before we call for inspection. This is not a “drop a door in the hole and leave” job in a 1965 block home.
We also handle Impact Windows & Doors in the full range, hurricane shutters and protection, and wind mitigation reports with code compliance. If your Fern Park roof-to-wall connections, opening protections, and glazing ratings need documentation for insurance, we’ll walk the inspector’s checklist with you line by line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fern Park
We’re authorized installers for, PGT, CGI, and more than a dozen other manufacturers, but our shop also works steadily with ES Windows, ECO Window Systems. Each brand has a different frame profile, a different glass package, and a different price point. We quote them side by side on paper so you see exactly what you’re buying, not just the brand name. We stock gaskets, rollers, and sealant matched to these manufacturers for Fern Park customers, which means a follow-up service call doesn’t wait on a regional distributor. If you’ve got an older Andersen slider or a ViewLux French door that’s binding, we service it, same truck, same crew.
Common Impact Windows & Doors Problems We See in Fern Park Homes
- Oxidized aluminum frames hidden behind stucco. Fern Park’s humidity runs above 75% most of the year, and aluminum frames from the 1960s corrode where you can’t see them. The first sign is usually a window that won’t seat flush or a water stain on the interior drywall after a hard summer storm. Once we open the wall, the frame often disintegrates at the corners, and the county inspector will flag it.
- Non-standard rough openings from DIY Florida room additions. A lot of Fern Park’s screened porches were enclosed by the original homeowner, built over jalousie windows with openings that don’t match any modern standard. Standard impact units won’t fit without masonry saw work and custom glazing orders. Any quote that doesn’t mention custom lead time is guessing.
- Failed perimeter sealant on original single-pane units. Near-daily summer thunderstorms with wind-driven rain expose bad flashing immediately. If the rough opening flashing isn’t redone when we install new impact windows, water finds the gap between the stucco and the frame, and the new window leaks worse than the old one did. Flashing is part of every Fern Park job, not a line item we hope you skip.
- Wiring running through window bays. In 1950s-1970s block homes, electrical lines often ran through the spaces above windows. Opening a wall for full-frame impact replacement can expose outdated wiring that triggers an electrical code correction under the same permit. We write allowances for this into the contract before we start, so it’s priced and approved in writing, not discovered and argued about later.
Pricing for Impact Windows & Doors in Fern Park, FL
A typical single impact window opening in Fern Park runs $850-$1,600 for a standard replacement, and $1,400-$2,400 for full-frame work that includes jamb reframing and flashing correction. Impact sliding glass doors run $2,200-$5,000 depending on width and whether the header needs structural work. Impact entry doors run $1,800-$4,200, and French door systems start around $3,000 per opening. Impact garage doors run $2,800-$5,500 installed, including track reinforcement and county inspection coordination.
What moves the price: whether the opening is standard or needs masonry adjustment, whether the original framing is sound, whether wiring corrections trigger an electrical permit amendment, and whether the Florida room jalousies require custom-sized glazing with extended lead time. We write every line on the estimate before we start, and any change gets your written approval before we touch it. Estimates are free. Call (754) 238-2201 and we’ll walk the property and put the real number in front of you.
We offer a permanent 5% discount for seniors and veterans, a free written repair estimate, and a maintenance check. TruePane is insured and bonded, background-checked on every technician, and we register both manufacturer warranty layers in writing on every job.
We Also Serve Cities Near Fern Park
TruePane works throughout the Seminole County corridor and beyond. We serve Impact Windows & Doors in Fern Park and neighboring communities including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. Same crews, same permits, same Done Right Promise. If you’re a few miles out, call (754) 238-2201 and we’ll tell you which day we can be there, and we’ll be there when we say.
Serving Fern Park, FL - Our Local Coverage Area
We’re based in the Fern Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Fern Park
Fern Park impact window and door permits are reviewed entirely by the Seminole County building department, not a city hall, because Fern Park is an unincorporated part of the county. We file directly with the county, schedule county inspections, and don’t waste two weeks on a rejected city application. Call (754) 238-2201 and we’ll handle the permit paperwork from first filing to final inspection, built into the estimate.
Yes, but the original rough openings under those jalousies almost never match modern standard sizes, so the work requires custom-ordered units and masonry saw adjustment in most Fern Park Florida rooms. We price the custom glazing and the masonry work separately on the estimate, so you see the real cost and the real lead time before you commit. It’s worth doing, the Florida room is usually the first place a storm finds its way in, but plan for four to six weeks on the custom order.
In 1950s-1970s concrete-block homes, outdated wiring often runs through window bays, and the original jamb framing was frequently undersized when it was built. Opening a wall for full-frame impact windows exposes both, and the Seminole County inspector will require corrections before we can close up. We write those allowances into the contract before we start, so the surprise is priced, approved in writing, and never sprung on you as a “change order” mid-job. The alternative, a lowball quote that discovers framing rot on day two and the price doubles, is exactly what we refuse to do.
In most Fern Park homes from that era, yes. The original aluminum frames are oxidized inside the stucco, and jalousie sections don’t have a standard replacement profile that meets current Florida wind-load requirements. Full-frame replacement lets us correct the flashing, the jamb, and the sealant at the rough opening, which is the only way a new impact window won’t leak in the first summer thunderstorm. It costs more than an insert job, but an insert job in a 1965 block home usually means putting a good window into a failing frame.
Fern Park sits inland, which means the design wind pressures are lower than coastal Seminole County, but not zero, and the county still enforces Florida’s Title 11 energy code and opening protection requirements. That gives you more flexibility on glass packages and frame materials than a beachfront property, while the real enemy here is humidity and water intrusion, not just windborne debris. We’ll spec the glazing and frame to the actual load and the actual humidity, not to a generic “Florida package.” Call (754) 238-2201 for a free estimate and we’ll explain the differences side by side on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fern Park and Seminole County with impact-rated glazing done true since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.