Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Florida Ridge
Impact window and door replacement in Florida Ridge typically runs $850-$1,400 per opening for standard impact-rated windows, and $2,800-$5,500 for impact sliding glass doors, with full-frame work on older CBS homes landing higher because of the waterproofing and framing repairs those openings usually need. Most Florida Ridge jobs are completed in one to three days once product arrives. If you’re looking for a company that knows the aluminum-frame failures and 2004 patch-job history of this specific area, call TruePane Windows & Doors at (754) 238-2201 for a free estimate.
Florida Ridge is our kind of territory. We’ve worked houses off 45th Street, along 12th Street, and through the manufactured-home communities east of 43rd Avenue. The salt air from the Indian River Lagoon, the 1970s and 1980s CBS construction, and the Frances-and-Jeanne-era shutter patches all collide here. We know what that means for windows, and we know what it takes to fix it right.
Why TruePane Windows & Doors Is Florida Ridge’s Preferred Impact Windows & Doors Company
We’re a second-generation glazier outfit led by Dale Kessler, and we’ve been doing this work since 2008 across South Florida. In Florida Ridge specifically, the homes we see tell a consistent story: original aluminum single-pane sash, shutters bolted on after 2004, and frames that look fine from the street but are quietly corroding from lagoon air. Homeowners here don’t need a sales pitch. They need someone who recognizes what they’re looking at.
Our local reputation is built on straightforward work and written warranties. Every Florida Ridge job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway. No arguing later. No fine print that covers neither. We also have a live person answering the phone 24 hours a day, 7 days a week. You call, a person answers. That matters in a community where a lot of folks remember the chaos of 2004 and don’t want to chase a callback form when a window fails in July.
Dispatch and scheduling are coordinated from our Miami office, but the crews serving Florida Ridge are local, background-checked, and uniformed. They measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves. That’s the standard, not the exception.
Our Impact Windows & Doors Services in Florida Ridge
TruePane installs, replaces, and services Impact Windows & Doors for homeowners throughout Florida Ridge. The sub-services below are the ones we handle most often in this community.
Hurricane Impact Windows
Full-frame impact window replacement is the most common job we do in Florida Ridge. The existing stock here is overwhelmingly 1970s-1990s aluminum single-pane, and it predates Indian River County’s current wind load and impact-resistance requirements. We pull the old frames, inspect the rough openings, rebuild any deteriorated jamb or sill, and install fusion-welded impact-rated units with low-E glass and argon fill. The result is a window that actually meets code, not one that just looks like it does.

Impact Sliding Glass Doors
Sliding glass doors in Florida Ridge take a beating from lagoon air and decades of use. Rollers wear out, tracks corrode, and the original non-impact glass is a liability in wind-borne debris events. We replace full sliding door systems with impact-rated units from PGT, CGI, and Ply Gem, and we handle the flashing and waterproofing correction those openings almost always need once we get the old door out.

Impact Entry & French Doors
Entry doors and French doors in older Florida Ridge homes often have rusted hinges, warped jambs, and weatherstripping that gave up years ago. We install impact-rated entry and French door systems that seal properly and meet current code. If the rough opening has hidden rot or undersized headers, we document it, price it in writing, and get your approval before we touch it.

Impact Garage Doors
Garage door openings are the largest single wind-load concern on many Florida Ridge homes built before the current code cycle. We install impact-rated garage doors and heavy-duty track systems, and we inspect the surrounding wall framing for the kind of salt-driven deterioration common near the lagoon.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florida Ridge
We’re an authorized installer for more than a dozen manufacturer lines, and for Florida Ridge homeowners we routinely quote PGT, CGI, and Ply Gem side by side on paper. That matters because the right product here depends on your specific opening, your level of salt exposure, and whether you’re in a CBS home or a manufactured home. We keep common parts and hardware stocked for local turnaround, and we register both warranty layers in writing on every job.
Common Impact Windows & Doors Problems We See in Florida Ridge Homes
- Salt-driven frame corrosion that hides behind intact-looking aluminum. The Indian River Lagoon and Atlantic proximity push salt-laden air across Florida Ridge constantly. Frames look structurally sound, but the weatherstripping has failed, hardware is corroded, and the glass seals are shot. By the time you notice fogging, the damage is usually years along.
- The 2004 Frances and Jeanne patch-job legacy. Many Florida Ridge homes got accordion or panel shutters after the 2004 double strike, but the underlying single-pane non-impact sash was never replaced. The shutter meets wind-borne debris code. The window leaks air, water, and noise, and it still is not impact-rated. Shutters don’t fix the window underneath.
- Manufactured and mobile home rough openings that reject standard impact products. A large segment of Florida Ridge housing is manufactured or mobile homes with non-standard openings. Installing a standard impact window without HUD-compliant or brand-specific hardware creates a false sense of code compliance and a real risk of failure during a storm.
- Failed waterproofing at the rough opening. On 45th Street we pulled a 1980s CBS home’s jalousie windows to find the original flashing tape had turned to powder and the rough openings were never waterproofed. Water had wicked behind the stucco for decades. That kind of hidden damage is common in Florida Ridge, and it is exactly why we inspect before we quote and write change orders before we repair.
Pricing for Impact Windows & Doors in Florida Ridge, FL
Here’s what Florida Ridge homeowners should expect, based on the jobs we’ve completed in the area. Standard impact-rated single-hung or double-hung windows run $850-$1,400 per opening installed, depending on size, glass package, and whether the opening needs full-frame replacement. Impact sliding glass doors range $2,800-$5,500. Impact entry doors run $1,900-$3,800. Full-frame work on 1970s-1990s CBS homes with hidden sill rot or failed waterproofing adds $300-$700 per opening for the repair work, and we give you a written change order before we do it. Call (754) 238-2201 for a free line-item estimate. We stand behind the number.
We Also Serve Cities Near Florida Ridge
While this page is for Florida Ridge, our crews regularly work in the surrounding area, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re in one of those communities and need Impact Windows & Doors in Florida Ridge or your own neighborhood, call us and we’ll point you to the right local page or schedule a visit.
Serving Florida Ridge, FL - Our Local Coverage Area
We’re based in the Florida Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Florida Ridge
No. Accordion shutters installed after the 2004 storms meet the wind-borne debris requirement when deployed, but they do nothing to fix the underlying single-pane aluminum windows that leak air, water, and noise every day of the year. In Florida Ridge, we regularly see homes with code-approved shutters bolted onto 30-40-year-old non-impact frames that would fail if struck by debris. Replacing those windows with impact-rated glass is a separate job from shutter compliance. Call (754) 238-2201 for an exact assessment of your openings.
Because 1970s-1990s CBS construction in Florida Ridge often hid wiring runs and undersized headers behind original window frames, and the salt-laden air from the lagoon accelerated corrosion on anything metal in those cavities. When we pull a jalousie or old sliding window on a house of that era, we frequently find powderized flashing tape, rotted jamb wood, and outlet boxes or wire runs that are not where current code expects them. Our process accounts for that: we inspect the opening first, write the repairs into the estimate as allowances, and any additional work is priced and approved in writing before we proceed.
Sometimes, but not usually in Florida Ridge. Jalousie windows have narrow, louvered openings that no impact-rated product fits directly, and old aluminum sliding windows typically have non-standard rough openings that do not match modern impact sash dimensions. In most cases, the right fix is a full-frame replacement with a properly flashed and sealed opening. We quote it straight and show you side-by-side options from PGT, CGI, or Ply Gem on paper.
Because the insulated glass unit’s seal has failed, and in Florida Ridge the salt-laden lagoon air accelerates that failure far faster than inland. Once the seal goes, moisture gets between the panes and fogs the glass permanently. The fix is new impact-rated insulated glass units, and in many older CBS homes, the surrounding frame and weatherstripping need replacement at the same time. We diagnose it during a free on-site visit. Call (754) 238-2201.
A standard impact window is engineered for site-built residential openings and tested to Miami-Dade or Florida Building Code standards for those assemblies. A mobile or manufactured home opening is different: it requires HUD-compliant hardware and brand-specific rough opening dimensions, and a standard impact window installed in that opening may not perform as tested and may not satisfy code. We quote HUD-compliant and manufacturer-specific products for manufactured homes in Florida Ridge, and we install them as the opening was designed to accept. Call us for a free estimate at (754) 238-2201.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Florida Ridge and the surrounding communities with years of glazier craft.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After