Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Palm Springs
Impact window and door replacement in Palm Springs, FL typically runs $850 to $2,400 per opening for code-compliant, Florida Product Approved units installed with full-perimeter flashing. Most single-family CBS ranch homes from the 1950s and 1960s need every original jalousie and aluminum slider replaced to satisfy a wind mitigation inspection, and we schedule Palm Springs jobs within a few days of the estimate. Call (754) 238-2201 for a free, line-item quote on your specific elevations. We know exactly which openings on a 1959 CBS ranch will fail inspection first, because we have been correcting them across Palm Springs for years.
Our Impact Windows & Doors team works this grid every week. We know the jamb rot pattern on the Lakewood side, the code enforcement habits at the Village of Palm Springs Building Department, and which original builders used galvanized fasteners that are now rust flakes inside the block pockets.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Impact Windows & Doors Company
Dale Kessler founded this company on a rule that gets tested on every Palm Springs job: if the pane is not true, the job is not done. That rule matters more on a 1960s jalousie-to-impact conversion than anywhere else. The original openings are rarely square. The jamb pockets are rarely dry. The permit paperwork is never optional. Homeowners in Palm Springs call us because they have watched neighbors get non-renewal notices from their insurance carriers after a contractor pulled one permit and swapped four openings. We do it squarely, document everything, and register both warranty layers in writing before the truck leaves your driveway.
Our reputation in Palm Springs is built on the Done Right Promise and The Keystone Standard. Background-checked, uniformed technicians measure every opening twice and quote manufacturer lines side by side on paper. No surprise line items. A live person answers our phone 24 hours a day, including weekends and holidays. When a Palm Springs homeowner calls at 7 p.m. on a Saturday because a tropical system is forming off the coast, they speak to a person, not a call center in another state.
Our Impact Windows & Doors Services in Palm Springs
Hurricane Impact Windows
Most Palm Springs homes still carry their original jalousie louvers, which offer almost no wind resistance and fail every wind mitigation audit. We replace them with impact-rated single-hung or casement units carrying valid Florida Product Approval numbers, installed to NOA specifications. Each window gets full-perimeter flashing tape at the jamb-to-block interface, because that seal is where wind-driven rain gets behind the stucco on these older CBS homes. If you live south of Forest Hill Boulevard or east of Congress Avenue, your exposure puts you at the high end of the 140 to 165 mph design wind speed range, and your spec matters.

Impact Sliding Glass Doors
The original single-pane aluminum sliders in Palm Springs ranch homes lose their seal at the jamb-to-block interface after about 20 years of settlement and salt exposure. When that seal fails, water moves behind the stucco and feeds the furring strips underneath. We see this on nearly every Lakewood and Greenbriar tearout. Our replacement impact sliders are fusion-welded at the corners and anchored to the block with stainless fasteners, not the zinc or galvanized hardware the original builders used. The old fasteners corrode to a wafer within a decade of salt-laden breeze off the intracoastal.

Impact Entry & French Doors
Hollow-core entry doors from the 1950s absorb salt moisture, swell, and gap at the threshold. When the wind-driven rain test comes, they fail exactly when the insurance carrier sends a post-installation audit. We replace them with impact-rated fiberglass or steel entry systems that hold their shape and seal. French doors are common on Palm Springs homes that have been lightly renovated, and we set them with adjustable sills so the threshold stays true even after years of slab settlement on the old pad.

Impact Garage Doors
Garage doors in Palm Springs are a frequent point of failure during tropical storm gusts. The original overhead doors on CBS ranches were built to hold the door, not the wind load. We brace and replace them with impact-rated doors and track systems designed for the 140 to 165 mph design wind speeds Palm Beach County enforces. If your garage faces east toward the intracoastal, the wind hits that door square before anything else on the elevation.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and CWS, so your warranty stays intact when we do the work. Homeowners in Palm Springs often ask us to quote PGT and CGI side by side, and we do that on paper at the kitchen table, not over the phone. Parts for these lines are available locally, which means a warranty follow-up on a 1967 Sherbrooke Avenue house doesn’t sit for two weeks waiting on a truck from out of state. We stock common jamb stock, stainless fasteners, and flashing tape specific to the CBS block conditions in this village.
Common Impact Windows & Doors Problems We See in Palm Springs Homes
- Galvanized fastener corrosion. Original 1950s jalousie jambs were anchored with galvanized screws that corrode to a wafer after ten years of salt exposure. The sash drops, then blows out during a tropical storm gust.
- Jamb-to-block seal failure. Single-pane aluminum sliders in concrete-block ranches develop a gap between the jamb and the block. Wind-driven rain moves behind the stucco and rots the furring strips inside the wall cavity.
- Hollow-core entry door swelling. Salt moisture makes the 1950s hollow-core door swell and gap at the threshold. The door fails the wind-driven rain test, and the insurer flags it on the post-installation audit.
- Permit shortcuts on jalousie swaps. Contractors pull a permit for one opening and informally swap adjacent jalousie panels on the same elevation. Village inspectors flag this routinely, and the failed final inspection leaves the homeowner with a documentation gap that can void a new policy.
Pricing for Impact Windows & Doors in Palm Springs, FL
A typical impact window replacement in Palm Springs runs $850 to $1,900 per opening for a standard-size single-hung or casement with full installation and flashing. Impact sliding glass doors run $2,100 to $4,800 depending on width and whether we need to remediate rotted jamb pockets. Impact entry doors start around $1,400 for a fiberglass slab and run up to $3,800 for a full French door system with sidelights. The coastal-spec hardware, meaning stainless fasteners and marine-grade flashing tape, adds about 12 to 18 percent to the materials cost compared to an inland-spec job. The cheap spec fails within a decade here, and then you pay for the tearout twice. We give you a fixed line-item quote before the job starts. Call (754) 238-2201 for your free estimate.
| Item | Palm Springs Range |
|---|---|
| Impact window (standard opening) | $850 - $1,900 |
| Impact sliding glass door | $2,100 - $4,800 |
| Impact entry door (fiberglass slab) | $1,400 - $2,200 |
| Impact French door system | $2,800 - $5,500 |
| Jamb pocket remediation (per opening) | $180 - $450 |
We Also Serve Cities Near Palm Springs
TruePane serves Palm Springs and the surrounding communities, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. The permit and wind-load rules vary from one municipality to the next, so if you live just outside the Village line, we check the jurisdiction before we quote. Learn more about our work in this area on our Palm Springs page.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm Springs
Yes, each opening requires its own permit record, and the Village of Palm Springs Building Department enforces this actively. We have watched inspectors flag side-by-side jalousie swaps that were pulled on a single permit. If you replace three windows on one elevation, three separate openings go on the permit application. Call (754) 238-2201 and we will walk the elevation with you before you file.
Jalousie windows were cheap, ventilated well in the hot season, and outlasted the original owners. But they provide almost zero wind resistance and now trigger non-renewal notices from insurers. Replacing them with impact-rated units in a jalousie-converted opening costs more than a standard window swap because the jamb pockets often need full reconstruction, not just a frame swap.
Nine miles inland still catches salt-laden breeze off the intracoastal, especially on east-facing elevations. The corrosion is slower than beachfront Palm Beach, but the galvanized fasteners from the 1950s and 1960s still rust to a wafer within a decade or two. We specify stainless fasteners and marine-grade flashing tape on every Palm Springs job, not just when the homeowner asks.
Yes, and it is now one of the most common reasons Palm Beach County carriers issue non-renewal notices. If your wind mitigation inspection shows no documentation of impact-rated openings, the insurer may cancel. Replacing the windows and registering both warranty layers in writing, with permits on record, is the only way to satisfy the carrier. Call (754) 238-2201 for a mitigation walkthrough before your next renewal.
Palm Springs has a dense stock of 1950s-1970s CBS ranch homes with rotted jamb pockets and galvanized fastener failures. In Lake Worth, a standard tearout is faster and the jamb pockets are often dry. In Palm Springs, we regularly rebuild the opening before we set the window, and the Village permit process adds time and documentation. The price gap reflects the rebuild labor, not the glass.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After