Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Pembroke Park
Impact windows and doors in Pembroke Park are not a luxury upgrade. They are a code requirement. Every replacement window and door in this town must carry a Miami-Dade Product Approval or a Florida Product Approval with an explicit High-Velocity Hurricane Zone (HVHZ) listing. That is not a preference. It is Broward County law, and inspectors here enforce it strictly. We install HVHZ-compliant impact windows and doors throughout Pembroke Park every week, and we know exactly what the permit office will ask for before you cut the first check. Call us at (754) 238-2201 for a free estimate.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Impact Windows & Doors Company
Most of the homes we open up in Pembroke Park were built between the late 1950s and the mid-1970s. That means concrete block, stucco, and original aluminum jalousie or single-hung windows that were never designed to hold an impact-rated unit. Our crews have re-framed more rough openings off Hallandale Beach Boulevard and the side streets running east toward the Intracoastal than we can count. We know what hides behind that stucco before we touch it because we have seen it a hundred times in this housing stock.
TruePane Windows & Doors has served South Florida homeowners since 2008. Dale Kessler founded this company in 2008 out of a second-generation glazier’s shop, not a franchise playbook. We hire local, train our apprentices into journeymen, and answer the phone 24 hours a day with a live person. Not a voicemail tree. Not a callback form. When you call about Impact Windows & Doors in Pembroke Park, you get a human who knows the difference between a Florida Product Approval and an HVHZ listing. That distinction matters more in this town than almost anywhere else in South Florida.
Every job carries our Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. If the pane is not true, the job is not done. We stand behind it.
Our Impact Windows & Doors Services in Pembroke Park
We install, replace, and service the full range of impact-rated openings for Pembroke Park homes. Here is what that looks like on the ground.
Hurricane Impact Windows
Pembroke Park sits fully inside the HVHZ, which means an impact window here must pass wind-load tests that products sold one county north never face. We do full frame-out replacements on the original aluminum windows common in this town, not glass-only swaps. A 1960s jalousie frame will not survive a wind-load test no matter what glass you put in it. We re-frame the opening, install a fusion-welded impact window with a Miami-Dade approval, and register the warranty layers in writing before we leave.
Impact Sliding Glass Doors
The tight lots in Pembroke Park mean most homes have a sliding glass door opening onto a small patio or carport on the rear elevation. Salt air from the Intracoastal, roughly a mile to the east, corrodes the original aluminum tracks and rollers ahead of schedule. We replace the full door unit, not just the panel, because a corroded track binds in July and fails the same wind-load test the inspector will run. Marine-grade or anodized finishes are standard on our Pembroke Park sliding door jobs, not a line-item upsell.
Impact Entry & French Doors
Entry doors on 1960s concrete block homes in Pembroke Park rarely have the structural header an impact-rated door requires. We add or reinforce the header, square the rough opening, and set an HVHZ-listed door that will actually close true in August humidity. French doors get the same treatment, with reinforced jambs and impact-rated glass throughout. If your current door binds in the summer, that is usually the framing, not the door slab.
Impact Garage Doors
Garage doors are the largest opening on most Pembroke Park homes, and the first thing a hurricane throws into the house when it fails. We install braced, impact-rated garage doors that carry the same HVHZ listing as our windows. On homes right off US-1 where the garage faces the street, we also check the track anchoring and header condition. Many original 1960s garage headers are undersized for a modern impact door, and we fix that before it becomes an inspection failure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Wind Mitigation & Code Compliance in Pembroke Park
Here is the part most contractors from outside Broward County get wrong. A Florida Product Approval is not enough in Pembroke Park. The product must also carry a Miami-Dade Product Approval or an explicit HVHZ listing on the Florida approval. We have watched out-of-town crews install budget impact windows with a Florida sticker, fail the Broward County inspection, get ordered to swap the product, and re-permit the whole job. The homeowner pays for that twice. We do not let that happen because we verify the HVHZ listing before we order the material, and we pull the permit ourselves.
On a tight-lot home off Hallandale Beach Boulevard, our crew pulled a single-pane jalousie window and found the original rough opening had undersized framing and failed flashing tape. Water had wicked into the block. Because Pembroke Park is fully in the HVHZ, we did not just swap the unit. We re-framed to accept a fusion-welded impact window with a Miami-Dade approval, wrote the wood repair allowance into the contract before pulling the permit, and got the change order signed in writing before touching the wall. That is how we handle every surprise this housing stock throws at us.
Trusted Brands We Service in Pembroke Park
We are an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park homes we most often quote, PGT, CGI, and ES Windows. These lines carry the Miami-Dade and HVHZ listings this town requires. We quote side by side on paper so you see exactly what each line costs and what the warranty covers, with durations stated up front. If you have an existing impact window from a different manufacturer, we service that too. We keep the common hardware and weatherstripping parts on the truck, which means most service calls in Pembroke Park finish in a single visit.
Common Impact Windows & Doors Problems We See in Pembroke Park Homes
- Original jalousie windows with zero impact rating. These were standard on 1960s Pembroke Park homes and they are glass slats in an aluminum frame. They fail wind-load tests outright and cannot be retrofitted. The whole opening needs re-framing for a modern impact unit.
- Salt corrosion on aluminum frames. The Intracoastal is a mile east, and the prevailing breeze carries salt over the whole town. Standard aluminum pitts, oxidizes, and eats weatherstripping years before its time. Marine-grade or anodized finishes are a practical necessity here.
- Undersized or rotted framing behind stucco. We find this on most 1960s concrete block homes when we open a wall. Without a written allowance in the contract, this discovery adds $1,500 or more to a remodel quote and the homeowner walks. We write the allowance in before we pull the permit.
- Fogged impact glass from failed seals. Fog between the panes means the insulated glass unit has lost its seal. The frame is usually still sound. We replace the glass unit under warranty when the manufacturer covers it, and we handle the paperwork for you.
Pricing for Impact Windows & Doors in Pembroke Park, FL
A full frame-out impact window replacement on a 1960s Pembroke Park home typically runs $1,200 to $2,800 per opening, including the re-framing work most of these houses need. Impact sliding glass doors run $3,500 to $7,500 depending on width and frame material. Impact entry doors run $2,500 to $5,500 installed. Impact garage doors run $3,000 to $8,000 for a braced, HVHZ-listed door with track reinforcement. These are the numbers we actually quote on Pembroke Park jobs, not national averages.
| Project | Typical Range (Pembroke Park) |
|---|---|
| Impact window, frame-out replacement | $1,200 - $2,800 per opening |
| Impact sliding glass door | $3,500 - $7,500 |
| Impact entry or French door | $2,500 - $5,500 |
| Impact garage door with bracing | $3,000 - $8,000 |
| Wind mitigation inspection and reinforcement | $400 - $1,200 |
You will never see a surprise line item on our bill. We write allowances into the contract for framing and waterproofing work we expect to find, and any change gets priced and approved in writing before we touch it. Call (754) 238-2201 to schedule your free estimate. We measure every opening twice and quote the full scope in writing.
We Also Serve Cities Near Pembroke Park
Our crews run from Pembroke Park north through Pembroke Park and into the surrounding communities. That includes Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are a few miles out, call anyway. If it is a window or a door and it is in our service area, we will be there when we say.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Pembroke Park
The whole frame needs to go. A jalousie frame is a series of aluminum slat holders, not a structural unit. It cannot pass an HVHZ wind-load test no matter what glass you drop into it. We do a full frame-out replacement, re-framing the rough opening to accept a fusion-welded impact window with a Miami-Dade approval. Call (754) 238-2201 and we will measure your openings and quote the full scope.
Because Pembroke Park sits inside the High-Velocity Hurricane Zone. A Florida Product Approval alone is not sufficient here. The window must also carry a Miami-Dade Product Approval or an explicit HVHZ listing on the Florida approval. Products legally sold in Palm Beach County often lack that listing, and Broward County inspectors fail them on sight. We verify the listing before we order material, so the window passes the first time.
No. The hurricane rating comes from the structural frame and the laminated impact glass, not the insulated airspace between the panes. Fog means the seal on the insulated glass unit has failed. The window is still impact-rated. The glass unit should be replaced under the manufacturer’s seal warranty, and we handle that paperwork for you. Call (754) 238-2201 for a service visit.
It will. When you pull a permit to replace a window in Pembroke Park, the inspector checks the opening against current HVHZ code, not 1965 code. That means the rough opening may need re-framing, the header may need reinforcement, and the waterproofing must meet current standards. We write allowances for that work into the contract before we pull the permit, and any additional scope gets priced and approved in writing before we proceed. No surprise line items, no permit re-dos.
A noticeable amount. The Intracoastal Waterway corridor sits less than two miles from most homes here, and the salt load accelerates oxidation and pitting on standard aluminum frames and hardware. Weatherstripping breaks down ahead of schedule, and exposed screws and rollers corrode. We use marine-grade or anodized finishes on every Pembroke Park installation as standard practice, not as an upsell. It is the only finish that holds up in this air.
Written by Dale Kessler, Owner at TruePane Windows & Doors. If the pane is not true, the job is not done.
Call for Your Free Pembroke Park Estimate
You have lived in your house for twenty years or more. You are not shopping for the cheapest bid. You want the work done right the first time by a company that will still answer the phone in thirty years. That is us. Call (754) 238-2201 and talk to a live person. We will schedule your free estimate, measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. A square deal, in writing. Done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.