Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Sunrise
Replacing a sliding glass door in Sunrise isn’t a simple swap-out job. Every unit must carry Miami-Dade NOA or Broward County product approval because the entire city sits inside the High-Velocity Hurricane Zone. Most original sliders in Sunrise homes, especially in the 1970s and 80s communities, fail today’s impact codes outright. TruePane Windows & Doors handles the approval paperwork, the permit pull, and the install correctly the first time. Call (754) 238-2201 for a free estimate from a crew that knows Sunrise’s building stock block by block.
We’ve worked in Sunrise long enough to recognize the three condo towers off Nob Hill Road and the single-story CBS tract homes along Sunset Strip without checking a map. That matters when a 45-year-old aluminum frame has corroded to the point where the sash binds every time the humidity spikes. Our Sliding & Patio Doors team serves Sunrise residents who want the door done right, not done twice.
Why TruePane Windows & Doors Is Sunrise’s Preferred Sliding & Patio Doors Company
TruePane was founded in 2008 by second-generation glazier Dale Kessler, but the craft tradition runs back more than years. We’re not a franchise operation that parachutes crews in from three counties away. We hire local, train apprentices into journeymen, and act like a company that plans to be answering the phone in Sunrise thirty years from now.
Sunrise homeowners regularly mention two things after we finish: the technician showed up when promised and the warranty paperwork was registered before the truck left the driveway. That’s The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated. No fine print that covers neither. No arguing later about what was or wasn’t included.
Every technician is background-checked and uniformed. Every opening gets measured twice. And a live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. When a Sunrise Lakes condo board president calls at 7 a.m. about a building-wide slider replacement, a human picks up.
Our Done Right Promise backs every job in Sunrise. If the install isn’t right, we make it right. No paperwork fight, no “that’s not covered” conversation. The founding rule Dale Kessler still keeps on the whiteboard: if the pane is not true, the job is not done.
Our Sliding & Patio Doors Services in Sunrise
Patio Sliding Doors
The standard two-panel or three-panel patio slider is the workhorse of Sunrise’s single-story CBS homes. Most original units are aluminum-framed with single-pane glass, installed when builders were putting up entire blocks in months. The humidity in Sunrise corrodes those frames, warps the track, and destroys the weatherstripping. We replace them with impact-rated units that meet HVHZ requirements and actually slide smoothly when the grandkids visit.
Panoramic Sliding Systems
For Sunrise homeowners who want the backyard to feel connected to the living room, panoramic sliders with wider glass panels and narrower frames do the job. These systems work especially well in the single-family homes north of Oakland Park Boulevard, where lots are deep enough to justify the footprint. The engineering matters more here than with a standard slider, because the larger glass surface has to hold up under hurricane wind loads.
Heavy-Duty Sliding Doors
Sunrise’s condo towers need sliders built for constant use and serious wind exposure. Heavy-duty models with fusion-welded frames and stainless steel rollers hold up to daily operation and South Florida storms. We install these frequently in Sunrise Lakes and other multi-story communities where the board requires documentation for every unit’s product approval. We pull the building-wide permit, coordinate with the association, and keep the project moving without disrupting residents who’ve lived there for decades.
Pocket & Barn Doors
Interior pocket doors and barn-style sliders solve real problems in Sunrise’s older floor plans. The 1970s layouts often pinch space in hallways and between the kitchen and patio. A pocket door reclaims the swing radius. But it also means opening a wall, and in CBS construction that’s not a casual job. We handle the framing, the drywall patch, and the door install as one complete scope, so homeowners aren’t stuck coordinating three different trades.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re an authorized installer for more than a dozen manufacturer lines, and for Sunrise work we lean on the ones built for HVHZ conditions. ES Windows, ECO Window Systems, and Andersen all make products we’ve installed across this city. We quote manufacturer lines side by side on paper so homeowners see exactly what they’re buying before they sign anything. If you’re replacing a slider in Sunrise Lakes or a patio door off Welleby, we’ll show you the glass package, the frame material, and the impact rating for each option, with pricing stated plainly.
Common Sliding & Patio Doors Problems We See in Sunrise Homes
- Corroded aluminum frames and jambs: Decades of South Florida humidity eat through the original aluminum frames from the inside out. The track binds, the sash drags, and eventually the door won’t open or close without serious force. We see this every week in Sunrise’s 1970s and 80s communities.
- Disintegrated weatherstripping: Forty-year-old seals on original sliders turn brittle and fall apart in the heat. That lets humid air and wind-driven rain leak around the jamb and pool in the track. The damage accelerates from there.
- Seal failure on insulated glass units: Fog between the panes means the insulated glass unit has failed. On older Sunrise sliders, this often shows up alongside frame corrosion, which is why a glass-only repair rarely makes sense.
- Non-compliant impact glass: Pre-HVHZ sliding doors lack impact-rated glazing. A single windborne missile during a storm can shatter the pane and expose the entire unit to wind pressure. In Sunrise, that’s not a hypothetical. It’s why the building code here is stricter than most of the rest of Florida.
Pricing for Sliding & Patio Doors in Sunrise, FL
A standard two-panel impact-rated patio slider in Sunrise typically runs $2,800 to $5,500 installed, depending on glass package, frame material, and whether the existing opening needs reframing. Heavy-duty sliders for condo towers start around $3,500 and climb with size and wind-load requirements. Pocket door installs involving wall work fall between $1,800 and $4,000. Panoramic systems, because of the engineering and larger glass panels, usually start at $6,000 and go up from there. These are honest Sunrise market ranges, not bait numbers. We also offer a permanent 5% discount for seniors and veterans, a free written repair estimate, and a maintenance check. Call (754) 238-2201 for a written, line-item quote. Estimates are free.
We Also Serve Cities Near Sunrise
Beyond Sunrise, our crews take Sliding & Patio Doors work in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re just over the city line and need someone who understands Broward County’s HVHZ requirements, call us. The drive from our South Florida office is short, and the rules don’t change at the border.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Sunrise
Yes. Even a like-for-like replacement in Sunrise requires a permit because the city sits entirely within the High-Velocity Hurricane Zone. The replacement door must carry Miami-Dade NOA or Broward County product approval, and the city wants that documentation on file. We pull the permit as part of every job. Call (754) 238-2201 if you’re not sure whether your current door has the right approvals.
We pull a single building-wide permit, present product approval documentation to the board up front, and schedule the work unit by unit so residents aren’t displaced from their daily routines. The key is coordinating the board’s requirements with the city’s HVHZ paperwork. We’ve run these projects in Sunrise Lakes multiple times. Call (754) 238-2201 and we’ll walk your board through the process.
The short answer: humidity, wind exposure, and age. Sunrise sits in western Broward County with open fetch from the Everglades to the west, so tropical systems hit sliders here with wind loads that denser coastal cities block somewhat. The humidity corrodes aluminum frames faster, and the original 1970s and 80s units in neighborhoods like Welleby and Sunrise Lakes are now 40 to 50 years old. Tamarac and Plantation have similar housing ages but different exposure patterns, so failure rates differ.
If the frame is sound and the door already carries HVHZ product approval, glass replacement may work. But most original Sunrise sliders have corroded frames and no impact rating, so replacing only the glass leaves a door that still fails today’s codes. The honest assessment comes from looking at the frame, not just the pane. We’ll tell you which path applies to your door after measuring it. Estimates are free at (754) 238-2201.
HVHZ approved means the door product has passed testing under the stricter Miami-Dade and Broward County protocols for high-velocity hurricane winds and windborne debris impact. Standard Florida product approval does not meet that bar. Since all of Sunrise is inside the HVHZ, every replacement sliding door must carry the higher approval. We quote only compliant products for Sunrise work. Call (754) 238-2201 for a written quote on an approved unit.
We recently replaced a 1982 aluminum sliding patio door in Sunrise Lakes Phase 3 after the original jamb corroded from decades of humidity and the insulated glass unit showed seal failure. Our crew installed a fusion-welded, impact-rated ViewLux slider with low-E glass and argon fill, pulling a single building-wide permit through the condo board and completing the swap in one day without disturbing the occupant’s daily routine.
That’s the standard we bring to every job in Sunrise, from the single-family homes off West Oakland Park Boulevard to the towers along Nob Hill Road. If your sliding door binds, fogs, leaks, or predates impact codes, call (754) 238-2201 for a free estimate. We’ll measure twice, quote in writing, and register both warranty layers before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.