Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Window Replacement in Lake Clarke Shores: What It Costs and What the Code Requires
Window replacement in Lake Clarke Shores typically runs $850-$2,400 per opening for a standard impact-rated unit installed, with full-frame work on lakefront homes starting around $1,400 and going up from there. Most jobs take one to two days per opening once materials arrive from the manufacturer. If you’re calling about a broken jalousie pane or a slider that no longer locks, the honest answer is that Palm Beach County wind codes no longer allow like-for-like replacement on these original 1950s and 1960s windows, so the fix is usually a code-compliant impact upgrade, not a glass swap.
Call (754) 238-2201 for a free estimate, and we’ll walk every opening with you before quoting a dollar figure.
Why TruePane Windows & Doors Is Lake Clarke Shores’s Preferred Window Replacement Company
We have been replacing windows in Lake Clarke Shores long enough to know what the town’s original homes throw at you. The jalousie windows, the single-pane aluminum sliders, the corroded tracks on lake-facing doors - none of it surprises us anymore. What matters to the homeowners who call us is that we answer the phone, show up when we say, and put the warranty in writing before we leave the driveway. That’s how Dale Kessler built this company, and it’s how every crew runs today.
Lake Clarke Shores homeowners tell us the same thing: they want someone who will still be in town in ten years when a seal fails or a latch sticks. We hire local, train our own apprentices into journeymen, and stand behind the work with The Keystone Standard - both manufacturer warranty layers registered in writing with durations stated, plus a Done Right Promise. If the pane is not true, the job is not done. That’s the founding rule, and it governs every install we do around Lake Clarke Shores.
A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. When you call about a broken pane on Waterside Drive or a fogged slider near Lake Clarke itself, you get a person who can schedule a real appointment.
Our Window Replacement Services in Lake Clarke Shores
Full Frame Replacement
Most original Lake Clarke Shores homes need full-frame replacement, not insert windows. The reason is simple: after fifty or sixty years of salt-laden air off Lake Clarke, the wood jambs and aluminum frames around the original openings are often too corroded or rotted to carry a new unit. We pull the old frame, inspect the rough opening, reframe where the studs have pitted or softened, and set a new impact-rated window that meets current Palm Beach County wind-load requirements. A typical full-frame replacement in Lake Clarke Shores runs $1,400-$2,600 per opening depending on glass size and structural condition of the opening.

Insert Window Replacement
Insert replacement works when the existing frame is square, dry, and structurally sound. That’s rarer in Lake Clarke Shores than in newer inland developments, because the humidity off the lake accelerates frame decay. But on interior elevations - street-facing windows, side-yard openings, bedrooms on the east side of the house - an insert can save real money, usually $850-$1,600 per window installed. We measure every opening twice, quote the manufacturer line on paper, and tell you straight if the frame can’t carry an insert. If it can’t, we say so and price the full-frame option before any work starts.

Storm Window Replacement
Lake Clarke Shores sits in a wind-borne debris region, and the town’s original windows were never designed for what southeast winds push across the lake during storm season. Storm window replacement here means impact-rated glazing that carries a Palm Beach County product approval number, not a snap-on exterior panel. Fusing storm protection into the window itself is the cleanest solution for these mid-century homes, and it’s the only solution that satisfies current code on lake-facing elevations. Expect $1,200-$2,400 per opening for impact-rated replacements on rear walls.

Energy-Efficient Upgrade
The original single-pane glass in Lake Clarke Shores homes was not built for Florida cooling loads. In a CBS home with afternoon sun on a southern elevation, the difference between original single-pane and a low-E, argon-filled impact unit is measurable - often a 15 to 25 percent reduction in the cooling load on the rooms that face the water. We quote energy-efficient packages side by side with standard glass so you see the actual dollar difference, not a vague efficiency promise. Most homeowners on fixed incomes find the upgrade pays back through lower FPL bills within five to seven years, and the comfort change in a west-facing bedroom is immediate.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Lake Clarke Shores’s Own Windows Fail the Way They Do
Lake Clarke connects through the C-51 canal system to the Intracoastal Waterway, which means the air moving over this town carries salt and humidity that inland Palm Beach County towns never see. Southeast prevailing winds push that air directly across the open water and into the rear elevations of homes on Waterside Drive, Lakeshore Drive, and every street that faces the lake. Aluminum frames pit and corrode faster. Glazing tape fails sooner. Sliding door tracks accumulate salt crust that grinds the rollers down until the door won’t lock or won’t move at all.
We have opened rear walls on 1960s CBS homes and found door tracks so pitted the new impact unit couldn’t seat without reframing the opening. That’s not a hidden surprise meant to pad the invoice; it’s the predictable result of sixty years of salt air doing what salt air does. Which is why we write a structural allowance into every lakefront contract before we start. You approve the change order in writing before we cut a single stud.
Trusted Brands We Service in Lake Clarke Shores
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Lake Clarke Shores homeowners we most often quote PGT, CGI, and Ply Gem because their impact-rated product approvals match what Palm Beach County permits demand on lake-adjacent lots. We stock common hardware and replacement parts for these lines locally, which means a broken latch or a failed balance on an existing window doesn’t have to wait on a slow manufacturer shipment. If you bought Andersen or Marvin windows years ago and the seals are starting to fog, we service those too, and we register every warranty layer in writing before the truck leaves your driveway.
Every job is covered by the Done Right Promise. Both warranty documents - manufacturer and our workmanship commitment - are registered in your name, with durations stated on paper, before we consider the job complete.
Common Window Replacement Problems We See in Lake Clarke Shores Homes
- Jalousie glass panes snapping out of corroded aluminum clips. The original jalousie windows on 1950s and 1960s homes were built with thin aluminum clips that salt air eats through over decades. A pane that pops out during routine cleaning leaves a window-sized hole in the house, and replacing the pane alone doesn’t solve the clip failure. The code-compliant fix is a full impact-rated replacement.
- Fogged single-pane sliders on lake-facing rear walls. We see fogging within weeks of a pressure wash on homes where the original glazing tape has failed. Lake Clarke’s humidity accelerates moisture penetration through the failed seal, and once the glass fogs, no repair restores the clarity. The opening needs a new sealed unit.
- Warped vinyl frames on southern elevations. Fusion-welded vinyl replacement frames from earlier retrofit jobs warp in Palm Beach County summer heat when installers reused rotten wood jambs instead of doing a full-frame replacement. The warp breaks the seal and the window starts leaking. If you have wavy vinyl frames on a south-facing wall, the original install was likely done on a compromised frame.
- Corroded sliding door tracks that no longer lock. On lake-facing rear walls, the original aluminum sliding door tracks fill with salt crust and the rollers grind to a stop. The door won’t slide, won’t lock, and can’t meet forced-entry or wind-pressure requirements. Even if you only noticed a broken lock, the repair on these original doors is usually a full door unit replacement rated for the wind zone.
Pricing for Window Replacement in Lake Clarke Shores, FL
A standard impact-rated insert window in Lake Clarke Shores runs $850-$1,600 per opening installed. Full-frame replacement on original openings starts at $1,400 and goes to $2,600 or more depending on the structural condition of the rough opening and the size of the glass. Energy-efficient upgrades with low-E, argon-filled impact glass add roughly $150-$300 per opening over standard impact glass. If you are replacing a sliding glass door on a lake-facing rear wall, budget $3,200-$7,500 for a code-compliant impact-rated unit, including any reframing the opening requires.
What moves the number is the condition of what’s behind the old window, not the window itself. A square, dry rough opening behind a street-facing window costs far less than a lake-side opening with pitted aluminum and rotted jambs. We write allowances for what we expect to find into every contract, and any change order is priced and approved in writing before we touch the work. Call (754) 238-2201 for a free, written line-item estimate. Seniors and veterans receive a permanent 5 percent discount on every job, and we offer a free written repair estimate.
We Also Serve Cities Near Lake Clarke Shores
Our crews work throughout the communities around Lake Clarke Shores, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you live outside the town limits but still need Window Replacement work done right, call us. We quote the same way regardless of the address: paper line items, clear durations, no surprises.
Serving Lake Clarke Shores, FL - Our Local Coverage Area
We’re based in the Lake Clarke Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Lake Clarke Shores
Palm Beach County wind codes no longer permit like-for-like replacement of jalousie windows on homes built in the 1950s through 1970s, which includes nearly the entire original housing stock in Lake Clarke Shores. Jalousie windows do not meet current wind-borne debris protection standards, so a broken pane triggers a code requirement for an impact-rated replacement unit. We can walk you through the compliant options and price them side by side on paper before any work begins. Call (754) 238-2201 for specifics on your house.
Yes, a permit is required for replacement of any exterior window or door in Lake Clarke Shores, and the product must carry a Palm Beach County product approval for the wind zone. We pull the permit, schedule the inspection, and make sure the installed unit passes before we call the job complete. The permit also protects you downstream when you sell the house, because unpermitted window work shows up on a title search. Call us for a straight answer on what your specific opening will require.
Fixed picture windows with low-E, argon-filled impact glass capture the most water view per dollar because they have no moving parts and the thermal performance is excellent. Pair a large fixed unit with operable casements or awnings on either side for ventilation, and you get the view without paying for multiple oversized operable units. On Lake Clarke Shores rear elevations, we typically recommend PGT or CGI impact picture windows for their product approvals and glass clarity. We quote these side by side with the standard option so you see the exact price difference.
Look for white or gray pitting on the aluminum frame, especially along the bottom rail and the track. If the door or window drags when you open it, or the lock no longer catches, the hardware and track are likely corroded from decades of salt-laden humidity off the lake. You may also see paint bubbling where the frame meets the stucco. These are early warning signs that the frame is losing structural integrity, and the fix is usually a full replacement rather than a hardware swap. We inspect all of this during a free estimate.
On lake-facing and southern elevations of original Lake Clarke Shores homes, expect some degree of framing repair. Salt air corrodes the original aluminum frames and the wood jambs behind them, and an insert relies on that framing being square and sound. On interior elevations where the frame has stayed dry, inserts can work. We measure and inspect every opening before quoting, and we tell you which option your house actually needs rather than defaulting to the cheaper path that won’t hold up. Call (754) 238-2201 to have us look at your specific windows.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Clarke Shores with honest window replacement and a guarantee in writing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After