Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Lighthouse Point
Window replacement in Lighthouse Point, FL typically runs $900-$2,800 per opening for impact-rated units, with full-frame tear-outs on canal-front homes landing between $1,400 and $3,400 depending on the buck condition and finish level. We’re TruePane Windows & Doors, and we’ve worked enough Cap’s Isle, Lighthouse Harbor, and Venetian Isles homes to know which frames survive the brackish air and which ones start pitting inside five years. If you’re tired of fogged glass and seized aluminum sashes, call (754) 238-2201.
The canals decide everything here. Salt doesn’t just come off the ocean. It rises off roughly 39 miles of interior waterway, carried inland by the same breeze that cools your patio. That’s a different failure environment than inland Broward, and it changes what we specify, what we stock, and how we flash the opening.
Why TruePane Windows & Doors Is Lighthouse Point’s Preferred Window Replacement Company
We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. That’s The Keystone Standard, and it’s been our baseline since Dale Kessler founded TruePane in 2008 on a principle: out-of-true installs and voided warranties were problems worth fixing permanently.
Lighthouse Point homeowners call us because we’ve actually worked the canal grid. We know which streets near the Hillsboro Inlet side take the worst spray and which interior canal bends get wind channeling during tropical events. We carry marine-grade stainless hardware and non-corrosive frame lines because that’s the practical minimum here, not an upsell. And a live person answers the phone 24 hours a day, 7 days a week. No voicemail tree. No call center. No callback form. You get a background-checked, uniformed technician who treats your home the way they’d treat their own mother’s.
We’ve also built our reputation the slow way: showing up when we say, doing the job right the first time, and standing behind it in writing. The Done Right Promise means if it’s not done right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
Our Window Replacement Services in Lighthouse Point
We focus on three replacement types for most Lighthouse Point homes. The right one depends on the condition of your existing frames and what the inspector will accept.
Full Frame Replacement
Full-frame replacement pulls the old window down to the CBS buck opening. It’s the correct choice when 1960s aluminum frames have pitted and corroded to the point where a retrofit insert would just hide the damage. In Lighthouse Point, we regularly see sill corners flaking white from wind-blown canal spray. That’s salt wicking into the aluminum’s screw bosses. You can’t patch that back to HVHZ compliance. Full-frame lets us flash the buck properly with flexible tape at the jamb-to-sill intersection and install a new impact unit with stainless hardware that won’t seize.
Insert Window Replacement
Inserts, or pocket replacements, fit a new window inside the existing frame. They work well when the original frame is still square, sound, and free of salt damage. Many Lighthouse Point homeowners choose inserts for non-waterfront-side openings where the aluminum held up fine. The job is faster and less invasive. We still spec marine-grade hardware on any opening facing a canal exposure within 200 feet.
Energy-Efficient Upgrade
Upgrading to argon-filled low-E insulated glass makes a real difference in Lighthouse Point, where the open-water fetch compounds wind pressure and the sun loads every elevation. A standard clear impact unit meets code, but it won’t do much for the July electric bill. The efficiency upgrade cuts solar heat gain and reduces condensation on the interior glass. We quote both specs side by side on paper so you see exactly what you’re paying for.
Storm Window Replacement
On older canal-front homes, we still find storm window setups over original single panes. Replacing those with properly rated impact windows eliminates the maintenance cycle and brings the whole opening up to Broward County’s High-Velocity Hurricane Zone (HVHZ) baseline, which requires every permitted replacement to carry a Miami-Dade Notice of Acceptance (NOA).
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We’re an authorized installer for more than a dozen manufacturer lines, and for Lighthouse Point we lean on PGT, CGI, and CWS for their salt-resistant finish packages and stainless hardware options. These aren’t marketing grades. They’re marine specifications designed for exactly the kind of brackish, multi-directional spray your home lives in. We stock local parts for these lines, which means faster turnaround when a sash or balance needs replacing, and we quote manufacturer lines side by side so you can compare glass packages, frame materials, and warranty terms honestly.
Common Window Replacement Problems We See in Lighthouse Point Homes
- Pitted white aluminum at sill corners: Brackish canal spray carries dissolved salts that wick into aluminum screw bosses and frame joints. Within five to seven years, the frame material flakes and the insulated glass seal fails, leaving you with fogged units that no longer pass inspection.
- Seized or snapped jalousie hardware: Original jalousie windows and sliding door locks seize shut after a single dry season near the canals. When homeowners force the lever, it snaps, and the window won’t meet HVHZ pressure cycling tests.
- Improper flashing at the jamb-to-sill intersection: CBS buck openings from the 1950s and 1960s were often flashed with nothing more than a bead of caulk. Wind-driven rain off the canal fetch drives water behind stucco, rots interior trim, and hides damage until the next paint job.
- Energy loss through original single-panes: Many 1960s canal-front homes in Lighthouse Point still have original single-pane sliders. They weren’t hurricane-rated when installed and they’re not thermally efficient by modern code. The air conditioning cost alone makes replacement a practical decision.
Pricing for Window Replacement in Lighthouse Point, FL
We Also Serve Cities Near Lighthouse Point
While this page is for Lighthouse Point specifically, our crews cover the surrounding communities. We handle Window Replacement service for homeowners in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs, and you can read more about our local presence on our Lighthouse Point page.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Lighthouse Point
Do I need Miami-Dade NOA windows for a Lighthouse Point canal-front home if I’m replacing only one bedroom window?
Yes. Any permitted window replacement in Lighthouse Point must carry a Miami-Dade Notice of Acceptance because the entire city falls within Broward County’s High-Velocity Hurricane Zone. There’s no partial exemption for a single opening. If a contractor quotes you a non-NOA unit for a permitted job, walk away. It will fail inspection, and you’ll pay twice. Call (754) 238-2201 to get a written quote for a compliant unit before you open the wall.
Why do my aluminum window frames look pitted and white after only a few years near the lighthouse?
That’s salt wicking into the aluminum. Lighthouse Point’s brackish canal water evaporates into the air and deposits dissolved salts on window frames, screw bosses, and hardware. Over time, the salt corrodes the aluminum’s surface and causes the white, chalky pitting you’re seeing. Inland Broward homes a mile west don’t get this nearly as fast because they lack multi-directional canal exposure. The fix is replacing those frames with non-corrosive or marine-grade finishes rather than repainting, which only hides the damage for a season or two.
Can I keep my original jalousie windows in the laundry room if I’m replacing the rest of the house?
No, and this catches people off guard. Lighthouse Point’s building code requires that when you pull permits for window replacement, any window in the same opening or on the same wall that’s part of the permitted scope must meet current HVHZ code. Original louvered aluminum jalousie windows are flatly non-compliant. They will trigger a failed inspection. If you’re doing a partial renovation and the inspector sees a jalousie still in place, expect to replace it too. Call (754) 238-2201 and we’ll quote the full compliant scope before the inspector shows up.
How does the fast-moving canal fetch affect wind loads on my window replacement?
The open-water fetch across Lighthouse Point’s canals channels and amplifies wind pressure against door and window openings during tropical events. That means the effective wind load on your canal-facing elevation is often higher than what a basic inland spec accounts for. We factor the specific fetch length and exposure direction into every quote, and we often recommend a higher-rated impact unit on the water side of the house even when a standard NOA unit would technically pass. The goal is a window that survives the pressure cycling test and the actual storm.
What’s the practical payback difference between an argon-filled low-E insulated glass unit and a standard clear impact unit in Lighthouse Point?
The argon-filled low-E unit costs $120-$300 more per window and typically cuts solar heat gain enough to reduce cooling load by 15-20% on exposed elevations. In Lighthouse Point, where the sun loads every elevation and the humidity compounds the comfort problem, most homeowners recover that difference in energy savings within four to seven years. The added benefit is less condensation on the interior glass and a more stable interior temperature near windows. We quote both specs on paper so you can decide with real numbers. Call (754) 238-2201 for a free estimate on either configuration.
Call TruePane for Window Replacement in Lighthouse Point
If your frames are pitting, your glass is fogged, or your jalousie windows won’t meet code, we’ll walk you through the options and put prices on paper. No surprise line items on the bill. No second appointment left hanging. We’re on the canals regularly, and we’ll be here in thirty years to stand behind the work. Call (754) 238-2201 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.