Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Dade City
Custom windows and doors in Dade City usually cost between $900 and $4,800 per opening, depending on whether you’re restoring a 1920s Craftsman bungalow near the courthouse or replacing aluminum jalousies on a 1970s CBS ranch off Fort King Road. Most custom jobs in the historic core run higher because the rough openings aren’t square and the sills are shot. We measure twice, quote on paper, and get the job done right. Call (754) 238-2201 for a free estimate.
We know Dade City differently than a franchise installer rolling up from Tampa. The neighborhoods off Meridian Avenue and around Church Avenue weren’t built to modern tolerances. That matters when you’re setting a custom window. Our crew works these streets regularly, and we’re generally able to reach most Dade City addresses within about an hour of taking your call.
If you’re replacing windows or doors in a home that’s stood for eighty or ninety years, you need someone who understands what’s behind those plaster walls. That’s what we do. Our Custom Windows & Doors team handles everything from single-window swaps to full-house restorations, and every job carries the Done Right Promise in writing.
Why TruePane Windows & Doors Is Dade City’s Preferred Custom Windows & Doors Company
We’ve built our reputation in Dade City one job at a time, on streets where neighbors talk. When a homeowner on Howard Avenue sees our truck, they know the job will be measured correctly, quoted honestly, and finished clean. Reviews from Dade City customers consistently mention two things: the crew shows up when they say, and the work stays done.
TruePane was founded in 2008 by second-generation glazier Dale Kessler out of a simple frustration: too many out-of-true installs and voided warranties. That’s why Dale keeps one rule on the whiteboard: if the pane is not true, the job is not done. More than years of community service stands behind that rule, and we hire local, train apprentices into journeymen, and act like a company that plans to be in town in thirty years.
Every installation here is covered by The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. No paperwork fights. No arguing. If it’s not done right within 90 days, we make it right.
Dispatch and scheduling are coordinated from our South Florida office, but the crews working in Dade City are local, background-checked, and uniformed. A live person answers the phone 24/7. Not a voicemail tree. Not a callback form. Call (754) 238-2201 and you’ll talk to someone who can actually help.
Our Custom Windows & Doors Services in Dade City
Custom Shape Windows
Dade City’s older homes are full of windows that were never standard. Arched tops, oval transoms, angled bays. Big-box replacement units don’t fit those openings, and forcing them in means cutting framing that shouldn’t be cut. We order true custom-shaped units, built to the actual rough-opening dimensions we measure, so the original architectural lines stay intact. In the historic district, that’s the difference between a window that looks like it belongs and one that looks like a patch.

Commercial Storefront Glazing
Downtown Dade City storefronts along 7th Street and Meridian Avenue still carry the original 1920s and 1930s glass work in many buildings. We replace cracked panes, rebuild rotted wood mullions, and install new storefront systems that match the scale of the old ones. For a shop owner dealing with a fogged or cracked display window, we’re usually out within the same business day to measure and quote. We don’t keep storefronts dark longer than necessary.

Curtain Wall Systems
For Dade City’s newer commercial buildings and larger residential projects, curtain wall systems have to handle interior air conditioning against 95-degree summer heat and the occasional hard freeze. That thermal swing is real here, and it’ll expose a poorly sealed system within two seasons. We install curtain wall with properly insulated pressure plates and thermal breaks, sized for the inland temperature loads Dade City actually sees, not the milder coastal numbers.

Architectural Grilles & SDLs
Simulated divideds, or SDLs, give you the divided-light look of original 1910s and 1920s sash without the maintenance of true multi-pane construction. We match bar width, profile, and spacing to reproduce what your home’s original windows looked like. On bungalows near the courthouse, we typically spec white or cream interior grilles with matching exterior profiles. The result is a window that keeps the historic character but seals like a modern unit.

Oversized Glass Panels
Some Dade City homes built in the 1960s and 1970s feature oversized fixed panes, especially in ranches along the hillier lots east of downtown. When those seals fail, you get permanent fog between the panes. We replace the glass, not the whole frame when the frame is sound, which saves you real money. If the frame is warped from decades of inland humidity swings, we’ll quote the full replacement and show you exactly why it’s needed.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dade City
We’re an authorized installer for more than a dozen manufacturer lines, including, and PGT. For Dade City’s climate, we often recommend CWS and ECO Window Systems for their inland thermal performance, and ES Windows when the job calls for a clean, modern aluminum profile on a custom shape. We carry local stock for common repair parts in these lines, which means fewer days waiting on a distributor in Tampa. You get a side-by-side paper quote showing exactly what each manufacturer charges, so you’re comparing the same spec from different makers, not guessing.
Common Custom Windows & Doors Problems We See in Dade City Homes
The hills east of downtown cause problems most Florida installers never see. Here are the four failure patterns we run into most.
- Out-of-plumb jambs from clay-soil settling. Dade City sits on clay-heavy soil, and the grade changes east of the historic district mean foundations shift more than in flat coastal Pasco. Door frames and window jambs get thrown out of square, which makes sashes bind and seals fail prematurely. We check jamb plumb and threshold levelness before quoting any replacement, because if we don’t, the new unit will bind just like the old one.
- Rotted sill plates on pre-1940s wood-frame homes. Decades of inland Florida humidity get under old paint and into the sill plates on original single-pane wood windows. We see this constantly in the Craftsman bungalows and vernacular cottages around the courthouse. You can’t set a new window on a rotted sill. We rebuild the sill first, then set the new unit with flashing tape on every jamb.
- Fogged double panes from seal failure. Dade City’s inland temperature swings are more pronounced than Tampa’s. Intense summer heat followed by occasional winter hard freezes stresses the seal between panes. When that seal breaks, you get fog you can’t wipe off. The repair is glass replacement, not chemical. We’ll tell you straight if your frame is worth keeping.
- Failed gaskets and caulk on 1960s-1980s aluminum jalousies. Those old jalousie windows on CBS ranch homes leak air like a screen door in August. The rubber gaskets harden and crack from UV exposure and afternoon thunderstorm cycles, and the caulk lines fail. The fix isn’t another bead of silicone over the old one. It’s a properly sized replacement unit that actually seals.
Pricing for Custom Windows & Doors in Dade City, FL
A typical custom wood window replacement in Dade City’s historic district runs $1,800 to $4,800 per opening, including sill repair where needed. Custom aluminum or vinyl units run lower, typically $800 to $2,200 per window. Oversized glass panel replacement runs $500 to $2,000 depending on glass type and accessibility. Full door replacements on settled frames run $1,500 to $4,200, including jamb straightening. What moves your price within those ranges: the condition of existing framing, whether the opening is square or needs rebuild, the glass package you choose, and whether your home sits in a lower-design wind-speed zone that permits lighter impact specifications. Dade City’s inland location under Florida Building Code means impact-rated product specs differ from what coastal Pasco and Hillsborough homes require, and that shows up in your quote as real savings. Call (754) 238-2201 for a written estimate. Estimates are free.
We Also Serve Cities Near Dade City
Our crews cover the surrounding communities, including Trilby, Lacoochee, San Antonio, and Brooksville. If you live in one of those areas and need Custom Windows & Doors in Dade City or nearby, we’ll send the same local crew that knows this inland hill country and its housing stock. Call (754) 238-2201 to schedule.
Serving Dade City, FL - Our Local Coverage Area
We’re based in the Dade City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Dade City
Historic district windows cost more because the rough openings are not square and the sill plates are often rotted from decades of inland humidity. A production installer doing volume work in Wesley Chapel sets a window into a square opening and moves on. We rebuild sills, square up jambs, and flash every opening before we set the new unit. That’s more labor, and it’s the labor you’re paying for. Call (754) 238-2201 for a line-item quote so you see exactly where the money goes.
No. Dade City sits roughly 40 miles inland and falls into a lower design wind-speed zone under Florida Building Code than coastal Pasco or Hillsborough communities. That means your impact specifications are less demanding, which can reduce product cost compared to what Tampa Bay waterfront homes require. You’ll still want a proper wind-rated unit, but not the full coastal spec. We’ll quote the correct product for your home’s actual code zone, not upsell you a coastal package you don’t need.
Seal failure. The rubber or polymer seal between the glass panes cracks under Dade City’s inland temperature swings, letting humidity in. Once the desiccant inside the spacer bar saturates, condensation appears between the panes and you can’t wipe it away. The fix is glass replacement or full window replacement depending on frame condition. Call (754) 238-2201 and we’ll tell you which one your windows actually need.
Yes. We use simulated divided lites, or SDLs, with bar width and profile matched to what your original windows had. On 1920s bungalows near the courthouse, we typically spec white or cream interior grilles with matching exterior profiles, and we’ll show you samples side by side before ordering. The finished window keeps the historic divided-light look but seals like a modern double-pane unit.
We check jamb plumb and threshold levelness before we quote anything. On the hilly streets east of downtown, clay-heavy soils cause foundation settling that throws door frames out of square, and a new door set into a crooked frame will bind in July. We straighten or rebuild the jamb, level the threshold, and then set the door. The quote reflects what we actually found, not a best-case guess. Call (754) 238-2201 to schedule a measurement.
Call TruePane Windows & Doors for Your Dade City Project
On a hilly street east of the historic district, our crew replaced the original wood double-hung windows in a 1920s Craftsman bungalow. The sills were rotted from decades of inland humidity, and the rough openings were out of square. We custom-sized ViewLux wood windows, rebuilt the sills, and used flashing tape on every jamb before setting the sashes. That’s the standard we bring to every Dade City job. If the pane is not true, the job is not done.
Call (754) 238-2201 for a free estimate. A live person answers. We stand behind it, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After