Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Palm Springs
Custom window and door replacement in Palm Springs, FL typically runs $800-$2,400 per opening for a standard impact-rated unit, with architectural shapes and oversized glass panels landing between $2,500 and $7,500 depending on size and wind-load requirements. We’ve worked the tight grid of CBS ranch homes off Congress Avenue and Lake Worth Road long enough to know which original openings pass the Village inspector’s review and which ones fail. If you’re holding a non-renewal notice from your carrier and staring at 60-year-old jalousie glass, call (754) 238-2201 for a free estimate. We’ll walk the house, measure every opening twice, and put the quote on paper.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Custom Windows & Doors Company
TruePane has been setting windows in South Florida’s concrete block homes since 2008, and in Palm Springs specifically, that means understanding what a 1958 CBS ranch needs that a 1998 frame home does not. Our techs know the Village of Palm Springs Building Department’s permitting habits, which matters when you’re replacing a jalousie with a casement and your insurance carrier expects a clean final inspection. We show up wearing uniforms, we answer the phone with a live person at (754) 238-2201, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. Dale Kessler founded this company on a rule that still sits on the whiteboard: if the pane is not true, the job is not done.
Palm Springs homeowners call us after the first contractor promised a permit and didn’t pull one, or after a fogged slider got ignored for five years. We don’t rush. We measure twice, quote manufacturer lines side by side on paper, and give you a written line-item price that doesn’t change when the work starts. That’s the square deal, and it’s the only way we work.
Our Custom Windows & Doors Services in Palm Springs
We install, replace, and service custom windows and doors across Palm Springs, with particular depth in the openings that define this village’s housing stock: original jalousie louvered windows, single-pane aluminum sliders, and hollow-core entry doors that have outlived their usefulness by two decades. Here’s what we handle.
Custom Shape Windows
Arched, radius, eyebrow, trapezoid, and half-round windows in Palm Springs are almost always made-to-order because the original builders cut openings on the fly. A 1961 ranch near Greenbrier Park might have a rounded front window that no off-the-shelf unit fits. We measure the rough opening with digital templating equipment, order the exact shape from our manufacturer partners including PGT and CGI, and set it square in the existing CBS wall. No filler panels, no oversized trim hiding a bad fit.
Commercial Storefront Glazing
Storefronts along Military Trail and Congress Avenue in Palm Springs deal with afternoon heat gain and relentless UV exposure that breaks down old aluminum storefront gaskets within a decade. We replace and service commercial storefront glazing with thermally broken frames and impact-rated glass that meets the Village’s enforced wind-load standards. Business owners get the same Done Right Promise in writing that our residential customers get.
Curtain Wall Systems
For the larger commercial and mixed-use buildings going up around Palm Springs, curtain wall systems carry enormous wind and water loads. We install curtain wall that meets Florida Product Approval standards and gets documented for the building department with each unit’s FPA number recorded. We work with engineers when the span demands it, but most Palm Springs projects fit our standard commercial installation process.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a window the look of a traditional multi-pane sash without sacrificing impact performance. Palm Springs homeowners updating 1950s ranches often want the neighborhood’s mid-century character preserved, and architectural grilles matched to the original sightlines do that. We order SDL patterns from the manufacturer so the spacing and profiles match the original windows, not a generic template. The result looks original and tests impact-rated.
Trusted Brands We Service in Palm Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Palm Springs work we lean on PGT, CGI, and Ply Gem for their impact-rated product depth and their acceptance by Palm Beach County insurers. We stock common hardware and parts for these lines in our South Florida warehouse, which means a replacement sash or a failed latch on a PGT window in Palm Springs doesn’t wait two weeks on a manufacturer’s logistics. And when you compare quotes with us, we put the manufacturer lines side by side on paper so you see exactly what each one includes and what it costs.
Common Custom Windows & Doors Problems We See in Palm Springs Homes
- Jalousie frames corroding at the screws. Original jalousie hardware on Palm Springs CBS homes has decades of salt-laden humidity working against it. When we remove these panels, the aluminum frames often crumble where the glass clips attach, which means a simple glass swap becomes a full frame replacement once the inspector sees it.
- Single-pane aluminum sliders fogging between the glass. Seal failure from humidity is the number one complaint in the 1960s ranch grid around Lake Clarke Shores-adjacent Palm Springs. Once the seal fails, the glass fogs permanently, and no cleaning fixes it. The unit needs replacement, and if it’s an original slider, it also fails the wind-load requirement.
- Hollow-core entry doors warping from wind-driven rain. A hollow-core door left unsealed at the jamb will soak up Palm Springs’ summer storms and warp within two seasons. By the time the homeowner notices light coming through the top corner, the door is scrap. We replace these with insulated, impact-rated entry doors sealed with backer rod and flashing tape at every jamb.
- Unpermitted jalousie swaps failing final inspections. We see this weekly: a contractor pulls a permit for one opening, then quietly swaps adjacent jalousie panels without papering each unit. The Village of Palm Springs inspector flags it, the final fails, and the homeowner’s insurance documentation has a hole in it. Don’t take that shortcut. We permit every opening and hand you the packet your carrier needs.
Pricing for Custom Windows & Doors in Palm Springs, FL
Here’s what Palm Springs homeowners should budget. A standard impact-rated casement or single-hung replacement runs $800-$1,500 per opening installed, depending on size and manufacturer line. A custom-shaped window adds templating and fabrication costs, landing at $1,800-$3,500 per unit. Oversized glass panels for large door walls or picture windows start around $2,500 and can reach $7,500 when the spans demand thicker laminated glass and heavier frames. Commercial storefront and curtain wall work is quoted per project, but a typical Palm Springs storefront replacement runs $3,000-$10,000 depending on lineal footage and framing conditions.
What moves the number: opening size, wind-load exposure category, frame material, and whether the existing rough opening needs structural repair. We don’t pad the quote. You get a line-item price in writing, and the Done Right Promise in writing puts the workmanship guarantee on paper with no arguing.
Call (754) 238-2201 for an exact quote. Estimates are free, and there’s no obligation.
We Also Serve Cities Near Palm Springs
TruePane works throughout Palm Beach County, and our Palm Springs crews regularly run to Palm Springs neighbors including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. Same crew standards, same written warranty registration, same square deal on every job.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Palm Springs
Yes. The Village of Palm Springs Building Department requires a permit for any replacement that changes the opening’s frame or size, and that includes swapping a jalousie for a casement. The inspector will check that the new unit carries a valid Florida Product Approval number and that the installation matches the NOA specifications for the wind-load design. We handle the permit application, the inspection scheduling, and the paperwork your insurance carrier needs to document the upgrade. Call (754) 238-2201 and we’ll walk you through the process at the free estimate.
Original single-pane aluminum sliders in Palm Springs CBS homes fog because the edge seals on those 60-year-old units were never designed for this humidity. Salt-laden air works into the spacer, the seal adhesive breaks down, and condensation builds between the panes within five years of the first hairline leak. Once the seal is gone, the glass is gone, and the only fix is a replacement. We install low-E insulated glass with fusion-welded frames that carry a written manufacturer warranty we register before we leave your driveway.
No. Existing jalousie frames in Palm Springs CBS homes are almost never structurally adequate for impact-rated glass, and even when they look solid, the aluminum at the screw points is corroded from decades of humidity. More importantly, the Village of Palm Springs inspector will not approve an impact upgrade on a jalousie frame that predates current wind-load standards. We replace the entire frame with a new, code-compliant unit and pull the permit for each opening. That’s the only path that produces a clean final inspection and insurance credit.
Palm Beach County falls outside the High-Velocity Hurricane Zone, but design wind speeds in Palm Springs still run roughly 140-165 mph depending on the home’s exposure category. That means every custom window and door we install carries a Florida Product Approval number and is installed to the NOA specifications for that exact product and opening. We verify the exposure category during measurement and specify the frame and glass thickness accordingly. It’s a non-negotiable, and the Village inspector enforces it.
You get insurance credit by producing documentation that each opening was replaced with an impact-rated unit carrying a valid FPA number, installed under a permitted job with a passed final inspection. Your carrier typically wants the permit record, the product approval number for each window or door, and proof the inspection closed. We prepare that packet for every Palm Springs job and register both manufacturer warranty layers in writing before the truck leaves. Let your agent see the paperwork and ask about the wind-mitigation credit for your policy. For help documenting your specific openings, call (754) 238-2201.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and Palm Beach County with custom window and door installations since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.