Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across University
Window installation in University, FL means working with a housing stock that most contractors from outside the area don’t fully understand. We’re talking about 1960s and 1970s ranch homes and small rental multi-units built for USF student occupancy, where jalousie windows and single-pane aluminum sliders are still doing a job they were never designed to do in a wind-borne debris region. TruePane Windows & Doors has been replacing these units for years, and we know exactly what a University homeowner faces: frames swollen with humidity, thresholds rotting from afternoon downpours, and landlords who’ve deferred maintenance for decades. Call (754) 238-2201 and tell us what you’re dealing with. We’ll give you a straight answer.
Why TruePane Windows & Doors Is University’s Preferred Window Installation Company
We’re not a franchise operation running crews through University on a rotating schedule. TruePane was founded by second-generation glazier Dale Kessler, and the rule on his whiteboard hasn’t changed since 2008: if the pane is not true, the job is not done. University homeowners call us because we’ve done the messy work other companies pass on. That includes converting jalousie windows to impact-rated sliders on rental four-plexes where students are still living in the adjoining unit and the shared driveway can’t be blocked for eight hours. We plan for that. We stage materials efficiently, post party-wall notices when we’re working against a shared wall, and keep the work area clean enough that the neighbors don’t have a reason to complain.
Every technician who arrives at a University home is background-checked, uniformed, and trained to measure every opening twice before ordering anything. We register both manufacturer warranty layers in writing under The Keystone Standard before our truck leaves your driveway. That means when we install windows from PGT, Ply Gem, or CWS, you’re not relying on a verbal promise that the warranty will hold up. You’ll have it on paper, with durations stated. Our Done Right Promise covers the workmanship with no paperwork fights and no arguing. If something isn’t right, we make it right. That’s the standard, not the exception.
Our Window Installation Services in University
Casement Windows
Casement windows are a strong choice for University homes where afternoon storms drive rain against the west and south elevations. The crank-operated sash seals tight against weatherstripping, which matters when wind-driven rain is hitting your window nearly every summer afternoon. For homeowners replacing jalousie units, a casement gives you a clean modern look while delivering the impact resistance that Hillsborough County’s wind-borne debris designation requires. We install casements in sizes that fit the original rough openings, so you’re not paying for unusual structural modifications.

Awning Windows
Awning windows hinge at the top and open outward, which makes them useful in University’s older single-story ranches where you want ventilation even during a light rain. They work well in kitchens and bathrooms where a horizontal opening makes sense and where a sliding window would eat too much wall space. We’ve installed awning windows in combinations with fixed picture windows on homes along Fletcher Avenue and in the neighborhoods east of Bruce B. Downs, and the result holds up well in our climate. The top-hinge design keeps rain out while letting air in, a practical detail that matters when storms roll through nearly every day from June through September.

Fixed & Picture Windows
Fixed picture windows don’t open, but they do something important on a University lot: they maximize light and minimize frame cost per square foot of glass. In the smaller living rooms common to 1960s University construction, a large fixed window can transform a dark interior. We frame and flash them properly, which is where cheap installs fail. The failure we see most often on fixed windows isn’t the glass; it’s the flashing tape job where the new frame meets the old jamb. We treat that seam with the attention it deserves, because a leak there shows up months later as a stain on your drywall.

Single & Double Hung Windows
Single-hung and double-hung windows remain the most common replacement we install in University’s aging single-family stock. The difference is simple: single-hung has a fixed top sash, double-hung lets both sashes move. For older University homeowners who intend to stay in their home, we typically recommend double-hung units because both sashes tilt in for cleaning, which matters when you’re no longer eager to climb a ladder to wash exterior glass. We install these with proper sashes that don’t bind, because a window that binds in July humidity is a window that was never set true in the first place.

Sliding Windows
Sliding windows are the direct modern replacement for the single-pane aluminum sliders that dominate University’s rental corridors. The difference is structural. The old aluminum frames flex and leak. A properly installed vinyl or aluminum-clad slider with fusion-welded corners holds its shape and seals against wind-driven rain. We do jalousie-to-slider conversions on a regular basis here, and the most common failure we correct from other contractors is missing or improperly lapped flashing tape at the old jamb. Get that detail wrong and the window leaks from day one. We don’t get it wrong.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in University
TruePane is an authorized installer for more than a dozen manufacturer lines, and for University homeowners we frequently quote PGT, Ply Gem, and CGI side by side on paper so you can see exactly what you’re paying for. These three brands cover the range most University homes need, from PGT’s impact-rated vinyl lines to CGI’s heavy aluminum impact windows suited to the demands of Hillsborough County’s wind load requirements. Because University’s housing stock is so consistent, we know which lines fit the standard rough openings in these 1960s and 1970s builds. That means faster turnaround on ordering and fewer surprises when the windows arrive.
Common Window Installation Problems We See in University Homes
- Jalousie conversions with no flashing tape. The old jalousie frame sits in an opening that’s been leaking for four decades. If the installer doesn’t properly flash the new fusion-welded frame to the old jamb, water gets behind the frame and shows up as a ceiling stain within a year. We see this exact failure on rental conversions along 131st Avenue with depressing regularity.
- Cheap single-pane sliders installed by absentee landlords. A landlord buys the cheapest aluminum slider available, has a handyman drop it in, and two years later the seal is fogged and the frame flexes in a strong storm. Those units don’t meet current Florida Building Code wind-load requirements, and they fail fast in University’s climate.
- Party-wall conflicts on multi-unit properties. University has a high concentration of duplexes and four-plexes. An installer who starts cutting out a shared-wall window without informing the adjoining unit triggers noise complaints and sometimes stop-work orders. We post notice, coordinate access, and keep the work area orderly so the job doesn’t stall halfway through.
- Threshold rot from afternoon flooding. The low-lying lots in parts of University flood briefly during intense convective storms. When a door threshold sits in standing water even once a week during summer, the frame absorbs that moisture and starts to rot. We see this on sliding door replacements often enough that we check threshold elevation and drainage as part of every quote where a slider is involved.
Pricing for Window Installation in University, FL
What you’ll pay depends on what you’re replacing and what you’re installing. As a baseline in University, a standard single-hung vinyl replacement window runs $450 to $750 per opening, installed. A double-hung in a typical ranch home runs $550 to $850 per opening. Impact-rated sliders, like a PGT or CGI unit sized for a 60-inch rough opening, typically land between $900 and $1,400 per opening. Jalousie-to-impact-slider conversions run higher, usually $1,200 to $1,800 per opening, because the old jalousie frame has to be fully removed and the rough opening rebuilt, flashed, and trimmed. Fixed picture windows run $400 to $900 depending on size and glass package. Casement windows fall between $700 and $1,100 per unit. These are University market ranges based on the housing stock we work in daily. For an exact quote on your home, call (754) 238-2201. Estimates are free, and we’ll give you a written line-item number, not a ballpark.
Key Takeaways:
- University’s aging rental stock still carries jalousie and single-pane aluminum windows that fail current wind-load code.
- Impact-rated replacement windows are the only option that satisfies Hillsborough County’s wind-borne debris region requirements.
- TruePane registers both manufacturer warranty layers in writing and stands behind workmanship with a Done Right Promise.
- On dense multi-unit lots, we stage materials to keep driveways clear and post party-wall notices as standard practice.
- Senior and veterans receive a permanent 5% discount on every job.
We Also Serve Cities Near University
TruePane’s crews serve University and the surrounding communities across Hillsborough and neighboring counties. If you’re in University or nearby, you’ll get the same background-checked technicians and the same written warranty registration. We also install Window Installation in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. Wherever you are in the area, the free estimate and the straight answer cost you nothing.
Serving University, FL - Our Local Coverage Area
We’re based in the University area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in University
The biggest cause is seal failure from years of subtropical humidity working on single-pane aluminum frames that were built to minimum standards for student occupancy in the 1960s and 1970s. The glazing compound dries out, the seals let go, and the window fogs and flexes. Once that seal is gone, the window has no thermal value and no storm value. The fix is full replacement with a modern impact-rated unit, properly flashed. Call (754) 238-2201 and we’ll tell you what’s worth saving and what isn’t.
Yes. We stage materials on the sidewalk with a rolling cart where needed, keep the shared driveway clear, and schedule tear-out work in a way that doesn’t trap neighbors in or out. On a recent four-plex conversion off 131st Avenue, our crew posted party-wall notices for the adjoining unit and worked within Hillsborough County’s noise ordinance hours, leaving the yard spotless. Tight lots change logistics, not the quality of the install. Call (754) 238-2201 and we’ll come measure the site before we quote, so the number reflects real access constraints.
For a standard window replacement, we typically schedule an on-site measurement within a few days of your call. If you have a failed window that’s letting water in during a University summer storm, tell us when you call and we’ll prioritize accordingly. A live person answers our phone 24 hours a day, 7 days a week. You won’t reach a voicemail tree when you call (754) 238-2201.
Not meaningfully. The labor rates and material costs are consistent across the Tampa metro, including University. What changes the price is the type of window and the condition of the existing opening. A jalousie-to-impact conversion costs more than a straight slider swap because the old frame has to be fully removed and the opening rebuilt. We quote line by line, so you’ll see exactly where the money goes before you sign anything.
Yes. Under The Keystone Standard, we register both manufacturer warranty layers in writing, with durations stated, before our truck leaves your driveway. You get a written copy. If something is not done right in the first 90 days, our Done Right Promise means we return and fix it without paperwork arguments. That’s the only way we’ve worked since 2008.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving University and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After