Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Hillsboro Beach, FL | TruePane Windows & Doors
We install, repair, and maintain CGI windows and doors across Hillsboro Beach. The quick answer: we’re an independent CGI service provider that has worked this barrier island long enough to know why a CGI window that lasts five years in mainland Broward can start failing in three here. It’s the salt. Both sides, all day, every day. If you need CGI service in Hillsboro Beach, call (754) 238-2201 for a free estimate.
Our crews have torn down and rebuilt more CGI frames on this island than anyone should have to. We know the Estate Collection, Sovereign Series, Targa Series, and Sentinel Series by the way their hardware wears and their seals let go. And we know the difference between a window that was installed wrong and a window that’s simply losing a fight against the Atlantic on one side and the Intracoastal on the other.
Why Hillsboro Beach Residents Choose Us for CGI Service
Most window companies can replace a CGI unit. Not many can tell you why the rollers on your west-facing slider seized while the identical door on the east side of your house still rolls fine. That kind of diagnosis comes from years of pulling hardware off frames in this specific salt environment, not from a training video.
Dale Kessler founded TruePane in 2008, but his hands learned windows long before that. He grew up in Kendall when it was nurseries and canal roads, and he spent summers watching his father re-glaze storefronts along the Tamiami Trail. He trained at Miami Dade College’s vocational program and has been setting windows and doors in South Florida for going on three decades. When it comes to impact-rated installations that pass inspection the first time and hold through an August storm, that’s the work he’s known for. He still measures every job himself. Measure it right the first time, or plan on coming back.
We are not a franchise. We hire local, train apprentices into journeymen, and answer the phone with a live person 24 hours a day. When you call about a CGI door that’s binding or a frame that’s showing white corrosion powder, you talk to someone who knows what you’re describing.
Common CGI Windows & Doors Problems We Solve in Hillsboro Beach
- Corroded frame corners and weep-hole screens on oceanfront elevations. The Atlantic and Intracoastal salt spray hits every side of a home on this island. Aluminum frame corners on CGI units, especially the older Sovereign Series, start showing white pitting and clogged weep holes within two to three years if they weren’t spec’d with marine-grade coating. We clean, treat, and replace those screens before water backs up into the track and rots the sill channel.
- Slider track roller seizure on CGI sliding glass doors. Salt-laden wind pushes sand and spray directly into track beds, with no inland buffer to slow it down. Tandem rollers on Estate Series doors seize up, and the door goes from smooth to stubborn inside a season. We rebuild track channels with marine-grade stainless steel rollers and add weep-hole screens so the next storm doesn’t undo the work.
- Hardware pitting on hinges and handles that aren’t marine-grade spec. This shows up most on west-facing and north-facing elevations, the Intracoastal side. Factory stainless hardware on some CGI series still isn’t enough for the dual-salt load here. We swap in solid marine-grade stainless aftermarket equivalents and leave the OEM parts for warranty-critical repairs where the manufacturer requires them.
- Glazing channel seal separation in older CGI impact units. Repeated HVHZ wind-load cycling, storm after storm, eventually weakens the seal between the glass and the frame on older impact units. You’ll see it as interior fogging or water staining at the sill. A fogged CGI window isn’t doing its impact job anymore, and we’ll tell you straight when it’s time for a full sash replacement rather than a seal patch.
- Failed wind mitigation inspections due to outdated or undocumented CGI installs. Hillsboro Beach homes built in the 1970s and 1980s often have impact products that don’t meet current HVHZ documentation standards. We inspect, document, and where needed bring the opening up to code so your wind mitigation credits and insurance paperwork hold up.
CGI Service in Hillsboro Beach: What Local Conditions Mean for Your Equipment
Hillsboro Beach sits on one of the narrowest barrier islands in South Florida. A few hundred feet of sand and road is all that separates the Atlantic from the Intracoastal in many stretches. Salt-laden wind off the ocean pushes straight through to the Intracoastal-facing windows and doors with zero inland buffer. That means the west-facing and north-facing CGI windows on a home here get the same corrosion load as the oceanfront elevation. That does not happen in Deerfield Beach or Lighthouse Point. On the mainland, a west-facing window sits behind trees, buildings, a mile or more of land. Here, that west side is sitting a hundred yards from open salt water. We see the same frame pitting, the same hardware failure, the same track salt-crust on the “protected” side of a Hillsboro Beach home that we see on the ocean side. Local contractors warn that even products marketed as coastal grade can show frame pitting within two to three years on the oceanfront side. The working standard here is heavy anodized aluminum or marine-grade powder coat plus solid stainless hardware throughout. Anything less is a callback waiting to happen, and we’d rather tell you that before the warranty expires than after.
CGI Models & Products We Service in Hillsboro Beach
We service the full residential CGI line: Estate Collection, Sovereign Series, Targa Series, and Sentinel Series. That covers fixed and casement impact windows, sliding glass doors, hinged terrace doors, and the older single-hung units still holding a place in many of the town’s 1980s-era condos. For structural or warranty-related repairs, we use OEM CGI parts whenever they’re available. For hardware and seals, we routinely specify marine-grade stainless aftermarket equivalents, because Hillsboro Beach’s dual-salt exposure demands a corrosion spec that exceeds factory standard on some series. The state of the frame decides whether we repair or replace. If the frame has pitting deeper than 0.020 inches, or a sash is out of square by more than 1/8 inch on an impact-rated unit, we recommend full replacement. A patch on a frame that far gone will fail inside two years, and we won’t sell you work we wouldn’t put in our own mother’s house.
CGI Service Pricing in Hillsboro Beach
Most CGI service calls in Hillsboro Beach land between $150 and $550 depending on what’s wrong. A basic hardware swap, re-alignment, or seal treatment runs on the lower end. Rebuilding both track channels on a large Estate Series slider with marine-grade stainless rollers runs higher, and a full sash or panel replacement is its own quote, built line by line on paper so you see exactly what you’re paying for. Every estimate is free, upfront, and written. Before the truck leaves, we register both warranty layers in writing and state the durations. That’s The Keystone Standard, and it’s the same on every job. Call (754) 238-2201 for an exact quote on your CGI unit.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Hillsboro Beach
No, the design pressure rating required by code is the same across Broward County’s HVHZ. What changes on Hillsboro Beach is corrosion demand. An impact window that passes the missile test and the wind load test on the mainland still has to survive a salt environment that’s dramatically harsher, because the island is so narrow. We spec marine-grade hardware and heavier frame coatings even when the product number on the sticker is the same. Call (754) 238-2201 for a free evaluation of your specific openings.
The west side faces the Intracoastal, and on a barrier island only a few hundred feet wide, that’s nearly as salty as the oceanfront with none of the beach-side windbreak. Salt spray off the Intracoastal sits in the same air that passes over your west-facing windows, and the frames get hit with it around the clock. Ocean-facing frames at least get rinsed by rain and wind-driven spray that moves through rather than settling. Both sides demand marine-grade protection.
In most cases, the roller assembly can be rebuilt without replacing the panel. We remove the door, clean out the track bed, install new marine-grade stainless steel tandem rollers, and replace any weep-hole screens that have corroded. Full panel replacement only becomes necessary if the frame itself is pitted or the sash is out of square beyond 1/8 inch. Call (754) 238-2201 and we’ll tell you which side of that line your door is on, with a written quote either way.
Hillsboro Beach enforces Broward County’s HVHZ building code, and most window and door replacements on the island require a permit with a final inspection. We pull the permit, schedule the inspection, and stand on site until it’s signed off. Our installations pass the first time because we don’t guess at measurements, and we don’t cut corners on anchoring or sealant. Free estimates include a permit scope so you know what you’re getting before anything is signed.
CGI builds every product line to Miami-Dade HVHZ impact standards, but no residential window is fully immune to marine corrosion. The Targa Series and Sentinel Series carry heavier frame treatments and are better suited to oceanfront and Intracoastal elevations. The Estate Collection performs fine with proper marine-grade hardware upgrades and consistent maintenance. For Hillsboro Beach specifically, we recommend marine-grade stainless hardware and heavy anodized or powder-coated frames on every elevation, not just the ocean side. Call (754) 238-2201 for a site-specific recommendation.
Service Areas Near Hillsboro Beach
We serve Hillsboro Beach and the surrounding coastal communities including Deerfield Beach, Lighthouse Point, Pompano Beach, and Boca Raton. If you’re just over the bridge or a few miles down A1A, we cover that too. You can read more about our CGI service in Hollywood or CGI service in Holmes Beach on their service pages, or see our broader Hillsboro Beach service area coverage. For complete CGI sales & service details, that page lays out the full model range.
Book Your CGI Service in Hillsboro Beach Today
If your CGI windows or doors are fogging, binding, pitting, or failing inspection, call (754) 238-2201. A live person answers, 24 hours a day. We’ll schedule the free estimate, measure every opening ourselves, and put the numbers in writing before any work starts.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.