CGI Windows & Doors in Jupiter Inlet Colony, FL

CGI Windows & Doors in Jupiter Inlet Colony, FL | TruePane Windows & Doors

We’re an independent CGI service provider working throughout Jupiter Inlet Colony, and the short answer is this: we pull CGI frames off houses here that have been hit by salt from two directions at once, and we fix them with factory parts so the wind-mitigation certification still holds. If your Estate Series slider binds on the inlet side or your casement looks like it sat in a salt bath, call (754) 238-2201 and we’ll come measure it right. Dale Kessler founded TruePane in 2008, but our crew has been reading this barrier island’s corrosion patterns for going on three decades.

Call (754) 238-2201

Jupiter Inlet Colony is a small, high-value pocket of Palm Beach County where nearly every home sits exposed to open Atlantic water on one side and the active tidal inlet on the other. That means a standard window repair is never standard here. For CGI sales & service that accounts for dual-salt-spray loading on every elevation, call us before you replace anything.

Why Jupiter Inlet Colony Residents Choose Us for CGI Service

Most window companies on the mainland look at a CGI frame the same way they look at any other impact unit. That works fine in Abacoa or Palm Beach Gardens. It does not work in Jupiter Inlet Colony, where the west-facing leeward doors corrode just as fast as the ocean-facing windows. We learned this years ago walking the full perimeter of Beach Road homes and finding inlet-side track beds packed with crystallized salt while the east-facing glass still looked serviceable. The two-front salt exposure changes what fails, when it fails, and what parts you need to order.

Dale Kessler grew up in Kendall when that part of Miami-Dade was still mostly nurseries and canal roads, and he spent summers watching his father re-glaze storefronts along the Tamiami Trail. He trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray. That habit shows up in how we approach every CGI service call in Jupiter Inlet Colony: slowly, without guessing, and with factory parts ordered before we touch the unit.

We carry OEM-compatible CGI rollers, lock assemblies, and glazing beads suited to the Estate and Classic series units common here. When a seal fails on an inlet-side fixed picture window, we check the full frame before quoting a repair. The salt in this air does not stop at the glass.

Common CGI Windows & Doors Problems We Solve in Jupiter Inlet Colony

• Aluminum frame pitting and oxidization on all elevations. In Jupiter Inlet Colony, salt spray arrives from open Atlantic water and the tidal inlet simultaneously, so even the leeward west façades corrode. We see pitting along CGI frame corners and sill channels on homes built in the 1950s through 1980s, and we rebuild or replace those frames rather than painting over the damage.
• Delaminated seals on fixed picture windows and sidelites. Tidal moisture loading works its way into insulated glass units over years, and Jupiter Inlet Colony’s year-round salt-laden air accelerates it. The result is interior fogging between CGI’s glass layers, which no amount of cleaning fixes. We replace the failed IG units and address the frame weep system so it does not recur in two seasons.
• Seized multi-point locking hardware on Estate Series sliding doors. Salt-laden air infiltrates the lock body and striker plates, and we consistently find the inlet-facing side fails first. Homeowners assume the west-facing doors are sheltered because they do not face the Atlantic, but the tidal inlet spray hits those leeward openings directly. We install factory CGI lock assemblies and re-lubricate tracks with marine-grade compounds.
• Track and roller degradation on large Estate Series sliders. Sand and salt particles get ground into the bottom track during every open-close cycle. By the time a Jupiter Inlet Colony slider starts grinding, the rollers are typically shot and the track bed has sacrificial corrosion. We rebuild both.
• Post-inspection failures on wind-mitigation recertification. Palm Beach County coastal code requires fully impact-rated glazing throughout Jupiter Inlet Colony, and many original CGI units from the 1990s and early 2000s no longer pass. We do full frame-out replacements when the certification label has been compromised.

CGI Service in Jupiter Inlet Colony: What Local Conditions Mean for Your Equipment

Jupiter Inlet Colony is the only Palm Beach County municipality whose entire populated area sits on a barrier island with simultaneous open-Atlantic and active-tidal-inlet frontage. That is not a marketing line. Look at a map: the ocean hits the east side, the inlet flows along the west side, and every window on every lot gets salt-laden air from all compass points year-round. What that means for CGI owners specifically is that the same wind-load rating applies to every façade, not just the ocean side. Your west-facing bedroom window carries the same code burden as your east-facing living room slider, and it fails in the same harsh environment.

On Beach Road in Jupiter Inlet Colony, our tech pulled two Estate Series sliding doors from a 1970s beach house after the west-facing inlet door failed its wind-mitigation inspection, a case our Door Installation in Jupiter Inlet Colony team often sees. The east-facing ocean slider looked rough, but the inlet-side track was packed with crystallized salt and the multi-point lock body had seized solid. We ordered factory CGI rollers and lock assemblies, rebuilt the track beds, and replaced the failed seal on the fixed panel so both doors could be recertified for the current Palm Beach County coastal code. That job is a textbook example of what dual-front exposure does to otherwise identical doors on the same house.

If you live on Beach Road or anywhere else in Jupiter Inlet Colony and you are scoping a repair as east-façade-only, walk the full perimeter first. The leeward openings are often in worse shape.

CGI Models & Products We Service in Jupiter Inlet Colony

We service the full CGI Estate Series line, including casement windows, awning windows, and sliding glass doors, plus the Classic Series single hung and the older fixed picture windows and sidelites common in 1950s to 1980s Jupiter Inlet Colony homes. For any slider, casement, or fixed unit where the hurricane-certification label matters, we default to factory CGI replacement parts. Aftermarket rollers or weatherstripping can change the unit’s performance envelope and void a homeowner’s wind-mitigation credits, and we will not do that quietly. For non-structural wear items like glazing beads and weep-hole screens on units too old for OEM stock, we install marine-grade aftermarket components and tell the homeowner upfront what they are getting and why.

We keep common CGI rollers, lock assemblies, and weatherstripping on hand for fast Jupiter Inlet Colony turnaround, and we order factory parts for anything that needs certification integrity. If you need Hurricane Impact Windows, Impact Sliding Glass Doors, or Wind Mitigation & Code Compliance work, this is what we do every week.

CGI Service Pricing in Jupiter Inlet Colony

FAQs - CGI Windows & Doors in Jupiter Inlet Colony

Why do my west-facing CGI sliding doors corrode as fast as the ocean-side windows even though they don’t face the Atlantic?
Because Jupiter Inlet Colony sits on a barrier island with the tidal Jupiter Inlet on its west side, and that inlet sends salt-laden air directly onto leeward openings. Your west doors get hit with the same marine chemistry as your east windows, and the multi-point locks and track beds are usually the first parts to fail. Call (754) 238-2201 and we will inspect both sides before quoting anything.

Can I just replace the failed seal on my CGI Estate Series fixed window here, or does Palm Beach County require a full-unit replacement?
A seal replacement is possible when the frame and certification label are intact, but many older fixed windows in Jupiter Inlet Colony have frame corrosion that compromises the unit. If the label is gone or the frame is pitted, you are looking at a full impact-rated replacement. We will tell you which one applies after we pull the sash and inspect, and the estimate is free.

Do CGI impact windows installed in Jupiter Inlet Colony need a higher design pressure rating than the same model in Jupiter or Tequesta?
Yes, and it is not close. Because the entire populated area sits on a barrier island with both open Atlantic and active inlet frontage, every façade must meet wind-load ratings that mainland homes only need on the ocean side. This is baked into Palm Beach County coastal code for Jupiter Inlet Colony, and it is part of why we always verify the certification label before any repair.

Why does my CGI multi-point lock keep seizing on the sliding door even though it’s a marine-grade product?
Marine-grade does not mean salt-proof. In Jupiter Inlet Colony, salt-laden air infiltrates the lock body and striker plates continuously from both the Atlantic and the tidal inlet, and the lock mechanism is the one moving part that gets no self-cleaning from daily use. We rebuild with factory CGI lock assemblies and marine-grade lubricant, and we usually see the inlet-facing lock seize first. Call (754) 238-2201 for a repair quote.

Will replacing my original 1970s aluminum windows with new CGI Estate Series units require a full frame-out in Jupiter Inlet Colony?
Almost always, yes. The original aluminum frames on 1950s through 1980s Jupiter Inlet Colony homes have decades of bi-directional salt-spray oxidation, and new impact-rated CGI units need a clean, true rough opening to seal and certify properly. Dale Kessler’s rule applies: measure it right the first time, or plan on coming back. We quote frame-out work as part of the replacement, not as a surprise change order.

Service Areas Near Jupiter Inlet Colony

TruePane provides CGI service across Jupiter Inlet Colony and the surrounding coastal communities, including Jupiter Inlet Colony service area coverage, CGI service in Jupiter Island, and CGI service in Kenneth City. If you are on the barrier island or the immediate inlet shoreline, we will be there when we say.

Book Your CGI Service in Jupiter Inlet Colony Today

Call (754) 238-2201 to schedule your free estimate. We will walk the full perimeter, check every CGI unit on every façade, and quote the repair or replacement in writing. A live person answers 24/7, and we stand behind the work with a Done Right Promise.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jupiter Inlet Colony and the surrounding coastal communities since 2008.