CGI Windows & Doors in Stuart, FL

CGI Windows & Doors in Stuart, FL | TruePane Windows & Doors

We provide independent CGI window and door service across Stuart, from full-frame tear-outs on 1960s CBS ranches to hardware rebuilds on riverfront Estates. What makes our CGI work here different comes down to one thing: we’ve spent over a decade repairing and retrofitting these units against Stuart’s three-sided saltwater attack, and we know which parts to pre-order before the first screw comes out. If you need CGI service in Stuart, call (754) 238-2201. We’re TruePane Windows & Doors, led by Dale Kessler, and we’ve been setting glass in South Florida for going on three decades.

Call (754) 238-2201

Why Stuart Residents Choose Us for CGI Service

CGI builds a serious impact product, but Stuart is not a forgiving place for any window or door. That’s where our CGI sales & service experience matters. Our crews have rebuilt and retrofitted CGI windows and doors across the tidal St. Lucie River and Manatee Pocket neighborhoods for over a decade, so we know which CGI series hold up to multi-directional salt air and which factory parts fail early here. Dale Kessler grew up in Kendall and trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray: slowly and without guessing. That’s the standard every Stuart job gets. We’re not the cheapest bid in town, and we don’t try to be. We’re the last call you need to make on a window or door, backed by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves your driveway.

Common CGI Windows & Doors Problems We Solve in Stuart

• Salt-driven pitting and white oxidation on bare aluminum frames and sills. Riverfront homes along the St. Lucie River get hit with salt air from three directions at once. Within a few years of install, bare aluminum CGI frames start showing chalky white blooms and pitting that eats into the metal. We remove the corrosion, treat the surface, and where frames are too far gone, we quote a full-frame replacement with anodized or clad options.
• Roller and track fouling on CGI sliding glass doors. Wind-blown sand mixes with Stuart’s humidity and turns CGI door tracks into grinding paste. Rollers seize, the door lifts off the track, and eventually the panel becomes a two-person job to move. We stock OEM CGI replacement rollers and clean or replace tracks as needed, using marine-grade hardware on reassembly.
• Failed or compressed weatherstripping in fixed and casement units. Dual river/ocean salt air breaks down weatherstripping faster here than it does in Port St. Lucie. Once the seal compresses or splits, air and water start finding their way in. A unit that drafts or weeps at the sill comes back to weatherstripping that gave out.
• Corroded hinge pins and operators on casement and awning units. East-facing openings along the St. Lucie Inlet take the worst of it. The hinge pins and crank operators on CGI casements and awnings corrode to the point where the sash won’t seal properly, or won’t open at all. We replace with PVD-coated hardware and stainless anchors because factory aluminum parts will not hold up in this environment.
• Discontinued hardware on older CGI units. Stuart has plenty of homes from the 1960s through 1980s with CGI units installed during the first wave of impact awareness. Some of that hardware is no longer manufactured. We give you an honest comparison: rebuild with quality aftermarket parts, or move to a newer impact-rated series. Sometimes replacement is the cheaper long-term path.

CGI Service in Stuart: What Local Conditions Mean for Your Equipment

There is a combination of forces at work in Stuart that we have not seen anywhere else on the Treasure Coast. Stuart sits where the St. Lucie River, Indian River Lagoon, and the St. Lucie Inlet all converge, which means salt-laden air and moisture reach window and door assemblies from multiple vectors at once, all year round. Even a home a mile from the water gets a steady diet of corrosive marine air, because the waterways wrap around the city rather than running past a single shoreline.

Martin County’s deliberately restrained growth management also left a disproportionately large share of housing stock from the 1960s through 1980s intact. These are CBS ranches with original single-pane aluminum sliders and hollow-core entry doors, framed for unit sizes that have since been discontinued. So the dominant job here is not a tidy insert replacement. It’s a full-frame tear-out, re-squared rough openings, new buck, new flashing, and a CGI unit set to current Florida Building Code wind-load requirements. Add in Florida’s property insurance crisis, and many Stuart homeowners are replacing windows and doors not because they want to, but because their carrier won’t renew without a certified wind-mitigation report. The county’s coastal corrosion zone also requires more aggressive anchoring and sealant schedules than inland Port St. Lucie. A contractor who does not know this will underbid the job and discover the difference after the walls are open.

CGI Models & Products We Service in Stuart

We service the full CGI lineup you’re likely to find in Stuart: the Estate Collection, the Classic Series, the Sentinel Series, and the 7700 Series. Same-day parts availability depends on what’s in our local stock, and we keep OEM CGI rollers, balances, weatherstripping, and fasteners on hand for the most common Stuart repairs. For anything we don’t stock, we pre-order before the tear-out, so the job doesn’t stall mid-installation. On Stuart installs, we use marine-grade PVD-coated hardware and stainless anchors because factory aluminum parts fail prematurely in this air. If your CGI unit has discontinued hardware, we walk you through the numbers: rebuilding versus replacing, in plain terms, on paper, side by side with the manufacturer lines quoted so you can see exactly what you’re buying.

CGI Service Pricing in Stuart

FAQs - CGI Windows & Doors in Stuart

Key Takeaways

• We’re an independent CGI service provider in Stuart, not manufacturer-affiliated or authorized.
• Stuart’s three-sided saltwater exposure accelerates corrosion on CGI frames, rollers, and weatherstripping faster than inland Treasure Coast cities.
• Most 1960s through 1980s Stuart homes need full-frame replacements, not inserts, because the original rough openings don’t match current unit sizes.
• We stock OEM CGI parts locally for common repairs and pre-order what we don’t carry before starting a tear-out.
• Every job includes a written quote, warranty registration in writing, and the Done Right Promise.

Service Areas Near Stuart

Our crews cover Stuart and the surrounding Treasure Coast communities. We also provide CGI service in Sunny Isles Beach and CGI service in Sunrise for clients with properties along the coast. Closer to home, our Stuart service area covers neighborhoods across the city, from the St. Lucie River frontage to the inland ranch subdivisions. If you’re not sure whether we work in your part of Martin County, call (754) 238-2201 and ask.

Book Your CGI Service in Stuart Today

If your CGI windows or doors are showing rust blooms, sticking, or weeping at the sills, don’t wait for the next storm to make it worse. Call (754) 238-2201 to schedule your free estimate. A live person answers the phone, we measure every opening twice, and we’ll give you a written quote with both warranty layers stated in writing before we leave.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart since 2008.