Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Clarke Shores, FL | TruePane Windows & Doors
We provide independent CGI window and door service throughout Lake Clarke Shores, from tune-ups and hardware swaps to our Window Installation in Lake Clarke Shores for full impact-rated replacements. The thing that sets our CGI work apart here is knowing how the town’s canal-connected humidity and southeast wind fetch punish lake-facing openings differently than anywhere else in Palm Beach County. If your CGI windows or sliders are binding, leaking, or failing to latch, call us at (754) 238-2201 and we’ll tell you straight whether it’s a repair or a replacement.
Why Lake Clarke Shores Residents Choose Us for CGI Service
We’ve been servicing CGI windows and doors in Lake Clarke Shores long enough to know what the Classic Series, Estate Series, and StormPro lines do well and where they fail when the lake gets involved. We’re not a manufacturer auth program shop, and that matters. It means we can tell you honestly when a $180 hardware rebuild will hold and when a $2,400 full unit replacement is the only thing that will pass a Palm Beach County wind-load inspection. Dale Kessler founded TruePane on a simple rule: if the pane is not true, the job is not done. He grew up watching his father re-glaze storefronts along the Tamiami Trail and has been measuring openings in South Florida for nearly three decades. That’s the standard our techs bring to our Door Installation in Lake Clarke Shores on every CGI door on every lakeside street.
We stock the balance springs, tandem rollers, multipoint locks, and extruded screen frames that generic shops have to special-order. When a lake-facing CGI door on Marina Isle Drive fails, you don’t want to wait two weeks for a part that should have been on the truck. We keep Lake Clarke Shores jobs moving because we know what this town’s openings need before we knock on the door. You’ll also find our full CGI sales & service approach applies whether you’re on the lakeside or a few blocks inland.
Common CGI Windows & Doors Problems We Solve in Lake Clarke Shores
- Corroded sliding door track systems. Lake Clarke’s canal-connected air carries salt and soft-water mineral residue that eats the original aluminum track bed faster than inland Palm Beach County neighborhoods see. The rollers seize, the door drags, and eventually the panel won’t lift off the track without a crowbar. We rebuild or replace the track and rollers, not just lube them.
- Hardware failure from wind-driven rain. Southeast winds funnel across the open water and push rain directly into lake-side CGI door roller assemblies. We see lift-off even when the panel seals look fine from the outside, because the water has been working on the internal hardware for years. A multipoint lock replacement plus a track-bed rebuild usually solves it before it becomes a forced-entry code failure.
- Weather seal failure on fixed and picture windows. The original 1950s-era single-pane frames in Lake Clarke Shores were retrofitted with CGI glass decades ago, but the seals around those retrofits are failing now. Southeast exposure speeds up the breakdown. We replace the glazing bead and seal system, and if the frame is still sound, you get years more out of that window.
- Sill pitting and frame channel corrosion. Aluminum CGI frames on waterway lots develop anodized coating breakdown that turns into pitting and white powder. If it’s caught early, we clean, treat, and re-seal the sills. If the pitting has gone through the anodized layer and into the structural channel, replacement is the honest call.
- Jalousie window retrofits. Lake Clarke Shores has a lot of original jalousie windows from the 1950s and 1960s that were never designed for impact glazing. When Palm Beach County code mandates an impact-rated replacement, we walk you through whether a CGI fixed window or an operable impact window makes sense in that existing rough opening, and how much the retrofit will actually cost.
CGI Service in Lake Clarke Shores: What Local Conditions Mean for Your Equipment
Lake Clarke Shores is one of the only Palm Beach County municipalities where most lake-front homes sit within 500 feet of an open-water canal system that connects to the Intracoastal. Every window and door on the rear elevation takes wind-driven salt spray from the same prevailing southeast fetch. But here’s what most homeowners don’t know: the building department still requires a standard Palm Beach County wind-load calculation, not a custom marine-corrosion review like Aventura requires. That means your CGI replacement has to meet the county’s product approval numbers, but the salt and humidity are working against your frame’s longevity in a way the permit office doesn’t account for. Our techs note the exact distance from the canal edge on the permit sketch because it changes whether a CGI insert or a full frame replacement makes more sense on your lot. A house 200 feet from the canal edge needs a different corrosion strategy than one 800 feet back. If you’re anywhere in the Lake Clarke Shores service area and own a mid-century home, this distinction probably applies to you.
CGI Models & Products We Service in Lake Clarke Shores
We service the full CGI residential line: Classic Series, Estate Series, StormPro, and Elegance Series. That means everything from single-hung impact windows in CBS homes to oversized lake-facing sliding glass doors with proprietary torsion-bar tracks. We prefer OEM-spec replacement parts for CGI, especially multipoint locks, tandem rollers, and extruded screen frames. Aftermarket components rarely match CGI’s factory tolerances and can void a board-approved install. When a frame is racked or a track bed is pitted through the anodized layer, we say so plainly: we’ll rebuild the unit where it’s code-viable, but we won’t patch a lake-side sliding door that’s beyond Palm Beach County forced-entry ratings. For homes with Impact Sliding Glass Doors, Hurricane Impact Windows, or Wind Mitigation & Code Compliance needs, we quote manufacturer lines side by side on paper so you can see exactly what you’re paying for.
CGI Service Pricing in Lake Clarke Shores
CGI service in Lake Clarke Shores typically runs from $180 for basic hardware and seal work on a single window up to $3,800 for a full lake-facing sliding glass door replacement with impact-rated glass and marine-grade hardware. What drives the cost here: how close your house sits to the canal edge, whether your existing frame is a 1950s-era aluminum installation or a newer CGI retrofit, and whether the opening needs a standard insert or a full tear-out to meet current wind-load code. A free estimate includes a measured inspection of your openings, a written line-item quote, and a straight answer on whether repair or replacement is the right call. We never surprise you with change orders, and both manufacturer warranty layers are registered in writing before the truck leaves your driveway. Call (754) 238-2201 for your free estimate.
Serving Lake Clarke Shores, FL - Our Local Coverage Area
We’re based in the Lake Clarke Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Clarke Shores
Because in most of these 1950s and 1960s homes, what looks like a bad track is actually a track bed that has corroded through its structural support, often with the mullion anchor screws stripped to the point where the whole frame no longer meets forced-entry or wind-pressure ratings. We find this on lake-facing rear walls all the time in Lake Clarke Shores. Patching the track would leave a door that binds in July and fails the next wind mitigation inspection. Call (754) 238-2201 for an exact quote. Estimates are free.
Sometimes, but not always. Jalousie openings are narrower than modern impact-window rough openings, and Palm Beach County code requires the new window to be anchored to a structurally sound CBS or treated-wood buck. If your existing jalousie frame is set into block with a thin aluminum liner, we can often reframe the opening with a deeper buck and set a CGI Classic or StormPro fixed window. If the opening is too narrow or the block is cracked, a full rough-opening resize is the only code-viable path. We’ll tell you which one you’re looking at before any work starts.
No special marine-corrosion permit is required in Lake Clarke Shores, but the standard Palm Beach County wind-load calculation does apply, and your lot’s proximity to the canal may require us to document anchor spacing and fastening more carefully on the permit sketch. We pull permits for every job and pass inspections before we consider the work done. A permitted install protects your resale value and your CGI warranty.
The quick answer: check the weep-hole screens on the bottom track first. Lake Clarke’s salt air and wind-driven rain clog them faster than inland Homes, and the track fills with water that corrodes the roller bearings from the inside. If the weep holes are clear but water is still sitting in the track, the door’s frame gasket and exterior seal have likely failed and the water is getting in around the glass channel, not through the track. We replace the seal system and, on lake-facing elevations, we recommend an aluminum track bed with a fresh marine-grade PVD finish. Call (754) 238-2201 for a diagnosis. Estimates are free.
In our experience, most Lake Clarke Shores HOAs will negotiate on finish color for impact-rated replacements, especially when the current windows are decades out of code. We’ve never had a board reject a CGI replacement outright when the homeowner showed the permit and the wind-load calculation. What helps is a written spec sheet from us that shows the exact CGI model, the product approval number, and the color options available from the factory. We’ll prepare that for your HOA before you even file the architectural request.
Service Areas Near Lake Clarke Shores
TruePane serves Lake Clarke Shores and the surrounding Palm Beach County communities. We also provide CGI service in Lake Helen and CGI service in Lake Mary, plus regular work in Acacia Villas, Anna Maria, and the neighborhoods just north along the C-51 canal corridor. If you’re within a twenty-minute drive of Lake Clarke Shores, chances are we’re already working in your area.
Book Your CGI Service in Lake Clarke Shores Today
If your CGI windows or doors are failing, don’t wait until the lake humidity turns a small repair into a full replacement. Call TruePane Windows & Doors at (754) 238-2201 and talk to a live person who knows Lake Clarke Shores openings and CGI hardware cold. Estimates are free, and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Clarke Shores since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.