Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Largo, FL | TruePane Windows & Doors
We service, repair, and install CGI windows and doors throughout Largo, Florida, and we’ve been doing it long enough to know the difference between a loose roller and a frame that’s quietly corroding from the inside out. Call (754) 238-2201, and a live person answers, day or night. Here’s the short version: if your CGI windows or doors live anywhere near Largo’s dual salt-air exposure, they need service and hardware that takes that specific condition seriously. Our crew has rebuilt and repaired CGI units in hundreds of Largo homes, from 1960s CBS ranch houses to the 55-plus manufactured home parks like Palm Hill. We are an independent CGI service provider. We are not manufacturer-affiliated or authorized, and we’ll tell you plainly when a part should come from CGI’s line and when a better option exists.
Why Largo Residents Choose Us for CGI Service
Most companies that touch CGI equipment know the product catalog. Fewer understand how a CGI Sentry Series roller behaves after three summers of pollen, salt, and sand blowing in from two different bodies of water. We do, because we’ve pulled those rollers out of their tracks and rebuilt them. Dale Kessler, our owner, grew up in Kendall when that part of Miami-Dade was still mostly nurseries and canal roads, and he’s been setting windows and doors in South Florida for going on three decades. He trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray: slowly, without guessing. That’s the standard our technicians carry into every Largo home, and it’s why we measure every opening twice and register both manufacturer warranty layers in writing before the truck leaves the driveway. We also answer the phone. A live person, 24 hours a day, seven days a week. Not a call center, not a form. The actual people who do the work.
Common CGI Windows & Doors Problems We Solve in Largo
- Salt-corrosion pitting on aluminum frames and hinge hardware. Largo sits almost exactly mid-peninsula between Tampa Bay and the Gulf of Mexico. Homes here receive salt-laden air from two directions at once, which corrodes aluminum faster than in cities fronting only one body of water. The north and east elevations catch both Gulf and bay air. We see pitting so deep the hinge pin binds and the sash won’t close square.
- Weep-hole clogging from wind-driven rain and humidity. Largo’s year-round humidity regularly stays above 70%. Combined with the wind-driven rain off both coasts, weep holes pack with fine debris and stop draining. Water then sits in the frame channel and starts corroding the track from inside, where you can’t see it until the door starts dragging.
- Weatherstripping degradation on Estate Series fixed panels. The constant salt-laden air in Largo dries and cracks rubber weatherstripping years before its expected life. We replace those seals with OEM material when available, and we adjust the panel so the new seal beds evenly.
- Roller lift-off and track bed packing in sliding doors. Pollen, salt, and sand blow in from both directions at once in Largo. That mixture packs into track beds like grout. Rollers climb over the packed debris, lift off, and then slam down, which eventually deforms the track. We clean, re-set, and replace rollers with units matched to the door’s weight rating.
- Failed welds and corroded sills on original single-pane aluminum. Largo has an enormous stock of 1960s and 70s concrete block homes still fitted with original aluminum windows. On those units, we often find failed corner welds and salt-damaged sills that will not hold a seal. A salt-damaged sill will fail again within one Largo summer, so for severe corrosion we recommend full-frame replacement rather than a patch.
CGI Service in Largo: What Local Conditions Mean for Your Equipment
Largo has one of the highest concentrations of 55-plus manufactured home parks in Pinellas County, and that changes the service call long before we unload a single tool. Every CGI window or door replacement in those parks must clear both the park’s HOA or management company approval and Florida’s HUD-code manufactured housing rules. That’s a two-step compliance process. Non-local contractors routinely misjudge it, and permits stall by four to six weeks while the homeowner calls the office wondering what happened. We walk into those jobs already knowing the park’s approval sequence and the HUD-code sizing constraints, which means we can quote the work honestly and schedule it once, not twice. The compliance stack also affects which CGI series makes sense. Manufactured home rough openings are non-standard, so the stock sizes a dealer might push rarely fit without modification, and some CGI models simply don’t adapt to HUD-code installations. Our crew knows which series clear that bar because we’ve done it in parks throughout Largo more times than we can count. Last spring our techs replaced six original single-pane aluminum windows in a 1968 concrete block ranch on Clearwater-Largo Road with CGI Estate impact units. The original frames had so much salt pitting along the bottom tracks that the sash would not seal closed, and one window had a failed weld at the corner. We removed the old full frames, set new pressure-treated bucks with stainless anchors sized for Largo’s 130 mph design wind speed, and shimmed the new CGI Estate flanges to perfectly align with the existing interior plaster returns so no drywall work was needed. That’s the difference between knowing the product and knowing the place.
CGI Models & Products We Service in Largo
We service the full CGI line we see most in Largo: the Estate Series, the Classic Series, the Sentinel Series, and the Estate 3200. Each has its own failure pattern here. Estate Series fixed panels age out their weatherstripping first. Classic Series units, now discontinued on several lines, are the ones where we most often source tested marine-grade aftermarket hardware that matches Pinellas County wind-load specs, because OEM parts simply aren’t available anymore and the homeowner shouldn’t have to rip out a door over a hinge. For current-production CGI units, we use OEM hardware and sealants whenever available and keep a local stock of the rollers, seals, and locking mechanisms that fail most often in Largo’s climate. That means weekday service calls don’t wait on an out-of-state parts shipment. Full-frame replacement follows CGI’s installation requirements and Florida Building Code wind-resistance rules, which in practice means working to Largo’s roughly 130 mph design wind speed, not whatever the last house in Tampa used.
CGI Service Pricing in Largo
Every job is different, but for service work across Largo we quote upfront and hold the number. What drives the price: whether we’re replacing a roller or rebuilding a corroded frame channel, whether the unit is currently in production or discontinued, and whether the home sits in a manufactured park with a HUD-code approval step. A simple service call runs less than a full-corrosion remediation, which runs less than a full-frame replacement. On units with severe salt pitting or outdated glass, we’ll tell you straight that the band-aid repair isn’t a square deal, because a salt-damaged sill will fail again within one Largo summer. The free estimate includes a line-by-line written quote, both manufacturer warranty layers registered in writing with durations stated, and a Done Right Promise on every job. If it’s not done right, we make it right, no paperwork and no arguing. Call (754) 238-2201 for an exact quote, and that number includes our free estimate. We also offer a free written repair estimate, a maintenance check, and a permanent 5% discount for seniors and veterans.
Serving Largo, FL - Our Local Coverage Area
We’re based in the Largo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Largo
Yes, in most cases Largo requires a local building permit for replacement windows and doors, even when the product already holds a Florida Product Approval. The Florida Product Approval covers the unit’s wind-resistance rating, but the city permit covers the installation specifics: anchoring, flashing, and compliance with Pinellas County’s adopted wind speeds. Our crew pulls the permit on every job that requires one, and we build the permit line into the written quote so there’s no surprise fee after the fact. Call (754) 238-2201 and we’ll tell you exactly what your address requires.
The CGI Sentinel Series is the one we see most often in Indian Rocks Beach and Largo’s manufactured home parks, because its smaller flange profile adapts to HUD-code rough openings better than the Estate Series. The Sentinel line also carries a lighter frame weight, which matters when the wall structure cannot carry the dead load of a heavier impact unit. That said, every park has its own HOA or management company approval process, and some parks specify a particular series in their governing documents. We’ll check that before we order anything. Call (754) 238-2201 and we’ll tell you what your park’s rules allow.
Because Belleair Beach and Largo sit mid-peninsula between Tampa Bay and the Gulf of Mexico, so the salt air comes from both directions at once. Clearwater fronts mostly the Gulf. St. Pete gets mostly the bay. Largo gets both, and the air in between stays humid year-round, which keeps the salt active on aluminum longer. Corrosion that takes eight years in Clearwater can show up in five in Largo. If we catch it at the pitting stage, it’s a manageable repair. If it’s through the frame, it’s a replacement. Call (754) 238-2201 for a service assessment, and our estimate is free.
That depends on the frame condition, not just the glass. If the aluminum frame is clean and square and the only problem is a fogged or cracked lite, glass replacement is possible, assuming the glass package is still available. But if the frame shows salt pitting along the bottom track, the seal won’t hold the new glass properly, and you’ll pay twice. On discontinued Classic Series parts, we source tested marine-grade aftermarket hardware that matches Pinellas County wind-load specs, and we’ll tell you the price difference between the glass-only fix and the full-frame replacement before we do either one. Call (754) 238-2201 for a straight answer, and the estimate is free.
No, not automatically. Wind mitigation credits depend on the opening protection rating the window product carries and how the unit is installed and certified. An impact-rated CGI window properly permitted and documented can improve your wind mitigation inspection results, but the credit is not automatic: the installation must be recorded correctly, and some insurers want a uniform protection level across all openings. Our crew documents every installation for insurance review, and we’ll tell you exactly what your inspector will be looking for. Call (754) 238-2201 and we’ll walk you through what your policy actually asks for.
Service Areas Near Largo
Our crews run service calls across Pinellas County and into the neighboring communities where Largo homeowners often have family or rental property. You’ll find us in CGI service in Lauderdale-by-the-Sea and CGI service in Lauderdale Lakes, and we regularly cross the county line for CGI repairs and replacements along the Suncoast. If you’re not sure whether we cover your address, call (754) 238-2201 and ask. The person who answers can tell you in about ten seconds.
Book Your CGI Service in Largo Today
If your CGI window or door is dragging, fogging, or losing its seal, call (754) 238-2201 to schedule your free estimate. We answer the phone around the clock, we show up when we say, and if the pane is not true, the job is not done. That’s the rule Dale Kessler keeps on the whiteboard, and it’s the standard on every Largo job we take.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Largo since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.