CGI Windows & Doors in North Lauderdale, FL

CGI Windows & Doors in North Lauderdale, FL | TruePane Windows & Doors

We’re TruePane Windows & Doors, and we provide independent CGI sales & service across North Lauderdale. The thing that sets our CGI work apart here is volume and familiarity with one specific problem: this city’s 1970s CBS homes are full of original jalousie openings that must be converted, not just swapped, to meet Broward County’s HVHZ code. Call (754) 238-2201 for a straight answer on your windows.

Call (754) 238-2201

Why North Lauderdale Residents Choose Us for CGI Service

Dale Kessler, our founder, grew up in Kendall and learned to read a rough opening at Miami Dade College’s vocational program. He measures every job himself, and he trained our crews to do the same. In North Lauderdale, that matters more than in most cities, because the original 1970s rough openings here were never engineered for impact-rated CGI products. We’ve cut new pans, re-cribbed jambs, and set full-frame CGI Classic and Pinnacle units into block walls across this city enough times to know what a permit inspector will flag before they see it. We’re independent, not manufacturer-authorized, and that independence is exactly why we can tell you when an insert will pass and when it won’t. Measure it right the first time, or plan on coming back.

Common CGI Windows & Doors Problems We Solve in North Lauderdale

• Corrosion at the jamb-to-block interface on CGI Classic Series aluminum frames. Thirty-plus years of interior humidity and the occasional salt-air push from coastal storm winds gets behind the frame and eats at the aluminum. West-facing openings near the Turnpike’s raised berm see it first. We pull the frame, wire-brush the block, and set the new unit with a proper pan.
• Roller and track deterioration on CGI sliding glass doors. North Lauderdale’s zero-lot-line yards mean airborne sand and leaf litter end up in the tracks. The door starts binding, then lifting off, and a permit re-inspection reads it as impact failure. We replace the OEM rollers and realign the track before it gets that far.
• Thermal seal fogging on CGI Pinnacle insulated glass. The same chronic condensation that plagues original 1970s aluminum frames hits Pinnacle units here, especially when HVAC ducts run through unconditioned garages and push moist air against the glass. A fogged seal can’t be buffed out; the IGU gets replaced with OEM-compatible glass.
• Jalousie-to-CGI conversion head details cracking at the sill. Original rough openings in North Lauderdale were framed for louvered jalousies, not impact-rated fixed or casement units. Flash fill alone is not enough. We cut new pans before setting any CGI unit in an old jalousie opening, or the sill cracks and leaks within a season.
• Classic Series single-hung balances that snap or sag. The original balances wear out on 1970s-era CGI installs. Non-OEM extruded profiles don’t match the original groove depth on Classic Series frames, so we source OEM balances whenever the aftermarket has them. That keeps the sash seated true and the operation smooth.

CGI Service in North Lauderdale: What Local Conditions Mean for Your Equipment

North Lauderdale is the only Broward city where the original 1970s tract-home plat approved nearly every interior and exterior opening as a jalousie unit. Those glass-slat louvered windows survive in a notable share of homes here, and Florida’s major property insurers now explicitly cite them as uninsurable openings. What that means for a CGI owner or a homeowner switching to CGI is this: a permit here routinely triggers full-frame-out work on load-bearing masonry walls that in neighboring Coconut Creek would be a simple insert. Last spring our two-man crew worked a single-story house on S.W. 77th Terrace where the back bedroom still had the original 1974 jalousies. The insurer flagged the opening. We removed the louvered sash, re-cribbed the rough opening to a true 4-inch depth, and set a new CGI Classic Series fixed impact window with a Miami-Dade-approved anchor schedule as part of our Window Installation in North Lauderdale. The wind-load inspection passed, the owner’s premium dropped by nearly $900, and we reused the interior stool to keep the trim line original. That’s a scope difference that changes weeks and cost, and it’s the kind of detail that decides whether a job passes on the first visit.

CGI Models & Products We Service in North Lauderdale

We work on the original CGI Classic Series single-hung windows still common in North Lauderdale’s older homes, plus Pinnacle Series impact windows, Estate Series fixed and casement units, and CGI French and sliding glass doors through our Door Installation in North Lauderdale. For balances, rollers, and weatherstripping, we use OEM CGI parts whenever they’re available through the aftermarket. Non-OEM extrusions don’t match the groove depth on Classic frames, and forcing them causes binding and premature wear. For hinge pins, sash locks, and smaller hardware, we stock a hybrid mix of OEM and high-grade stainless aftermarket parts, so most North Lauderdale calls get finished in a single visit. If a jamb is rotted through, we don’t rebuild it. We replace the frame, because a patched jamb won’t pass HVHZ code.

CGI Service Pricing in North Lauderdale

FAQs - CGI Windows & Doors in North Lauderdale

Does a CGI impact replacement in North Lauderdale require a product approval that covers the entire HVHZ boundary, even though we are 15 miles inland? Yes. North Lauderdale falls inside the High-Velocity Hurricane Zone, so every CGI opening must carry a Miami-Dade or Florida Product Approval for impact resistance, regardless of distance from the coast. Call (754) 238-2201 and we’ll verify your product approval before we quote.

Why can my CGI Classic Series hurricane window still fail a wind mitigation inspection even if it is less than 10 years old? The window itself may be approved, but the installation can fail if the anchors are wrong for CBS block, the mullions weren’t rated for the wind load, or the jalousie conversion underneath wasn’t done to HVHZ code. Inspections check the opening, not just the product. Call (754) 238-2201 for a free estimate on getting yours right.

If my 1970s home has jalousies in only the utility room, can I keep them and still pass an insurance inspection with new CGI windows elsewhere? No. Florida insurers cite any remaining jalousie opening as uninsurable, even in a utility room. Most North Lauderdale quotes now include jalousie elimination as its own line item. Call (754) 238-2201 to get your full-house conversion priced.

What is different about installing a CGI impact window in a CBS North Lauderdale wall versus a wood-frame wall in Coral Springs? CBS block requires different anchors and fastening schedules than wood frame. A block wall also transfers more thermal movement to the frame, which is why pan and flashing details matter more on a masonry home. Our crews set impact units in block walls here weekly.

Can you reuse my existing 1970s aluminum screens on new CGI Series 500 casement windows to save money? No. The 1970s screen frames don’t match the CGI Series 500 casement sash profile, and the screen spline channel is not compatible. Trying to reuse them leaves gaps and defeats the seal. We include new screens in the quote. Call (754) 238-2201 for exact numbers.

Service Areas Near North Lauderdale

We handle CGI work in North Lauderdale service area and the surrounding communities, including CGI service in North Miami and CGI service in North Miami Beach. If you’re just outside the city line, call and ask. We’ll tell you straight whether we can get a crew to you.

Book Your CGI Service in North Lauderdale Today

Call (754) 238-2201 to schedule your free estimate. A live person answers around the clock, and we’ll be there when we say. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving North Lauderdale since 2008.