Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Ocean Ridge, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CGI service across Ocean Ridge for homeowners dealing with salt-corrosion failures, seized hardware, and impact-rating compliance on existing installations. The one thing that sets our CGI work here apart: we know how Ocean Ridge’s dual-exposure salt environment attacks these units from both sides at once, and we repair and replace accordingly. Dale Kessler has been setting impact-rated windows and doors in South Florida for nearly three decades, and our techs work on CGI units in Palm Beach County’s coastal towns every week. If you need Ocean Ridge Window Installation or door service, call (754) 238-2201.
Why Ocean Ridge Residents Choose Us for CGI Service
We’re not a CGI dealer, and we’re not an authorized warranty provider. We’re an independent service company that works on CGI windows and doors constantly, so our familiarity is hands-on. Our techs remove corroded operators from original oceanfront casements, track down the exact glass pack for a StormPro 600, and know when a slider’s track damage calls for replacement rather than a roller swap. Dale grew up in Kendall watching his father re-glaze storefronts along the Tamiami Trail and trained at Miami Dade College’s vocational program, where he learned to read a rough opening slowly and without guessing. That’s the standard our crews carry into every Ocean Ridge home. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
Common CGI Windows & Doors Problems We Solve in Ocean Ridge
- Aluminum frame pitting and white salt bloom on Intracoastal-facing elevations. Prevailing southeast winds drive salt spray across the water and straight into west-facing frames. You’ll see white crust forming at the corners and along the bottom track. If it’s caught early, we can clean and reseal. If the pitting has gone deep, the frame has lost structural integrity and needs replacement.
- Seized or corroded casement crank mechanisms. Constant salt-laden humidity works its way into the operator housing on oceanfront CGI casements. Cranks get stiff, then refuse to turn at all. We replace the operator assembly with genuine CGI stainless hardware where the unit is Florida Product Approved under permit.
- Glazing seal failure and moisture between panes. Intense UV and daily thermal cycling from oceanfront sun exposure breaks down the sealant around the glass pack. Once you see fog between the panes, the insulating value is gone and the glass pack needs replacement. On impact-rated units, that means a new laminated glass pack, not a reseal.
- Roller and track degradation on CGI sliding glass doors. Fine wind-blown sand and salt accumulate in the bottom track and abrade nylon rollers until the door drags or jumps the track. We clean the track, replace rollers with marine-grade parts, and check the sill for hidden corrosion while we’re there.
- Interior frame stop corrosion hidden behind drywall returns. This one catches Ocean Ridge homeowners off guard. Salt-laden condensation wicks behind the interior stop and eats the aluminum from the inside out. You won’t see it until the window is pulled. When we find it, full-frame replacement is the only honest fix.
CGI Service in Ocean Ridge: What Local Conditions Mean for Your Equipment
Ocean Ridge sits on a narrow barrier island with the Atlantic to the east and the Intracoastal Waterway to the west. That means virtually every home here gets salt air from two directions at once. On the Intracoastal-facing elevations, CGI aluminum sill pans and interior frame stops often corrode from the inside out due to wicking of salt-laden condensation trapped behind the interior stop. It’s an invisible failure until the window is pulled, and it requires a full frame-out replacement rather than a simple insert under Palm Beach County coastal inspection. We see this pattern on homes along Old Ocean Boulevard and throughout Ocean Ridge’s mid-century ranch and Florida Modern stock. A homeowner will call about a crank that won’t turn, and we’ll find the frame stop behind the hinge side has corroded through in two places, hidden by the drywall return. That’s not a patch job. That’s a structural failure.
CGI Models & Products We Service in Ocean Ridge
We service the CGI Estate Series, Classic Series, StormPro 600, and Sentinel Series. Our parts approach is straightforward: for structural and impact-critical elements like laminated glass packs and stainless hardware, we use genuine CGI replacement parts, especially on Florida Product Approved units under permit. For cosmetic or non-structural parts like weatherstripping and weep covers, we use direct-fit marine-grade aftermarket parts when they match the original profile and pass the same salt-spray test. We stock common CGI hardware for Ocean Ridge service calls, which means fewer return trips. When a frame has advanced hidden corrosion, we don’t patch it. We tell you straight that full replacement is the only way to pass coastal inspection and keep the warranty intact. You can learn more about our CGI sales & service work across the region.
CGI Service Pricing in Ocean Ridge
| Service | Typical Range |
|---|---|
| Service call and diagnostic | $75-$150 |
| Casement crank / operator replacement | $180-$340 per unit |
| Roller replacement on CGI slider | $160-$280 per door |
| Glazing seal repair (single window) | $210-$410 |
| Full-frame CGI impact window replacement | $780-$1,320 per opening |
| Full-frame CGI impact door replacement | $1,900-$3,250 |
What drives cost here is what we find when the unit comes out. Ocean Ridge’s salt exposure means interior corrosion is common, and interior corrosion means full-frame replacement, not an insert. That’s a bigger job with a bigger permit scope under Palm Beach County’s coastal inspection process. Our free estimate includes removing the interior stop on one suspect opening if needed, so you know what you’re dealing with before you commit. We give you written line-item pricing and you approve the work before we start. Call (754) 238-2201 to schedule your estimate.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Ocean Ridge
The Intracoastal-facing elevations get salt-laden condensation that wicks behind the interior frame stop and sits there. The Atlantic side gets direct salt spray too, but it dries faster in the breeze. The west-facing units hold moisture against the aluminum longer, so hidden corrosion accelerates from the inside out. Call (754) 238-2201 if you’re seeing white bloom or stiffness on your west-facing units, and we’ll inspect behind the stop before it spreads further.
It depends on what we find inside the frame. Many of Ocean Ridge’s original aluminum sliders from the 1960s have been exposed to salt air from both sides for decades, and the frame stop behind the interior drywall is often the first to go. If the frame is true and the corrosion is surface-level, a pocket insert works. If we find through-corrosion, a pocket insert won’t pass coastal inspection and won’t hold the impact rating. The only way to know is to pull the stop and look.
Sometimes, but in Ocean Ridge it’s less common than it is inland. The dual-salt exposure weakens frame tolerances over time, and Palm Beach County’s coastal inspection requires the entire assembly, frame included, to meet current wind-load code. If the non-impact unit has a frame in good condition and the opening is square, you may be able to fit an impact glass pack. But in our experience with Ocean Ridge’s housing stock, full-frame replacement is usually the safer call and the one that passes inspection the first time.
Ocean Ridge permit review can add three to ten business days compared to some inland Palm Beach County municipalities because every coastal opening triggers wind-load documentation review. We submit the product approval paperwork with the permit at the same time, so you don’t end up waiting through two separate coastal inspections. That sequencing is something Dale insists on, and it saves homeowners real time.
Mostly the StormPro 600 and the Classic Series. Those were the workhorse impact lines installed in Ocean Ridge’s original ranch and Florida Modern builds from the 1960s onward, and many of them are still in place. On newer tear-down rebuilds, we see the Estate Series and Sentinel Series going in as full new-construction packages. We service all four lines.
Service Areas Near Ocean Ridge
Our crews cover Ocean Ridge and the surrounding barrier island and mainland communities along the Palm Beach County coast. We also provide Ocean Ridge service area coverage for homeowners throughout the town. If you’re in a neighboring city, we run CGI service in Ocoee and CGI service in Okeechobee, along with Palm Beach, Boynton Beach, Delray Beach, Lantana, and Manalapan.
Book Your CGI Service in Ocean Ridge Today
If your CGI windows or Ocean Ridge Door Installation are showing salt corrosion, fogged glass, or hardware that fights you, call (754) 238-2201. We’ll schedule your free estimate, pull the stop on a suspect opening if needed, and give you a written line-item quote before any work begins. A live person answers the phone, every call, any hour.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.