Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Plantation, FL | TruePane Windows & Doors
We service, repair, and replace CGI windows and doors across Plantation, Florida as an independent provider, not a factory-authorized dealer. The difference that matters here is simple: we know which Miami-Dade NOA fastener schedules actually pass inspection on Plantation’s CBS concrete block homes, because we’ve pre-drilled them on hundreds of openings. Call (754) 238-2201 for a free estimate.
TruePane Windows & Doors has worked with CGI product lines in Broward County’s High Velocity Hurricane Zone for over a decade. Plantation sits squarely inside that zone, meaning every CGI unit we touch has to meet a stricter standard than the rest of Florida. If you own a home here, you already know the stakes. We’ll walk you through exactly what your openings need.
Why Plantation Residents Choose Us for CGI Service
Most window companies in South Florida will tell you they can service a CGI unit. Few of them have pulled the specific NOA product approval for a CGI Estate Series fixed window, pre-drilled the concrete block to the exact embedment depth, and had a Broward inspector sign off the same day. We have, and we’ve done it on Plantation’s CBS ranch homes more times than we can count.
Dale Kessler founded this company on a rule that still hangs over our workbench: measure it right the first time, or plan on coming back. He trained at Miami Dade College’s vocational program and has been reading rough openings in South Florida for going on three decades. When our techs work on a CGI window in Plantation, they’re not guessing at the rough opening. They’re checking the original extrusion, the anchor spacing, and the condition of the concrete before a single fastener goes in.
We also stock OEM CGI-compatible replacement parts locally, which means most service calls don’t stall waiting on a freight shipment from the manufacturer.
Common CGI Windows & Doors Problems We Solve in Plantation
CGI builds a solid product, but Plantation’s specific combination of humidity, salt air, and CBS construction creates predictable failure patterns. Here’s what we see most often:
- Frame-to-glass seal failures on non-impact fixed units. Plantation’s year-round humidity and morning condensation work on those seals constantly. A non-impact CGI fixed window that’s ten years old often shows hazing or moisture between panes. We remove the glazing bead, inspect the IGU, and replace the sealed glass unit with OEM-grade materials.
- Corrosion at CBS anchor points. Original installers sometimes used non-NOA fasteners that react with concrete alkali. We’ve pulled anchors out of Plantation block walls that were rusted halfway through. The fix is replacing them with the exact fastener type and embedment depth listed in the CGI product approval, then resealing the anchor pocket.
- Warped or binding sashes in Estate Series casements. Wind-driven rain in Plantation storms can overload weep channels, especially on east-facing elevations. When those channels clog, water sits in the sash track and warps the extrusion. We clear the weeps, straighten what can be straightened, and replace the sash only when the corner welds are compromised.
- Track pitting and roller seizure on impact sliding doors. Salt-laden air from the Atlantic, roughly 8 to 10 miles east of Plantation, combined with oak pollen accumulation does a number on sliding door tracks. ROLLERS seize, the track pits, and the door binds. We replace rollers and repair or resurface tracks when the extrusion is still sound.
- NOA compliance gaps on older installs. If your CGI window was installed before Broward tightened its inspection practices, the anchoring may not match the current NOA drawing. We check the fastener schedule against the product approval and correct it when needed, so your wind mitigation documentation holds up.
CGI Service in Plantation: What Local Conditions Mean for Your Equipment
Here’s the one thing that separates Plantation from just about every neighboring city: the building department physically checks the Miami-Dade NOA fastener schedule at framing inspection. Nearly every home in Plantation is CBS construction, concrete block and stucco. A wood-frame crew from inland Broward or Palm Beach County can strip a screw into a stud and call it done. That doesn’t fly here. If a CGI window is anchored with the wrong embedment depth into concrete block, an inspector red-tags it immediately, even on an insert job where the existing frame stays in place.
That’s why our crews pre-drill from the NOA chart onto a job card before a single screw goes in. The fastener type, the embedment depth, the spacing, all written down and checked against the product approval. On NW 12th Street in Plantation, a 1974 CBS ranch had original aluminum jalousie windows so oxidized the glass channels had crumbled. Our tech pulled the NOA for a CGI Estate Series fixed unit, pre-drilled the concrete block with the exact 3/16-inch x 3-1/4-inch tapcons shown in the product approval, and set the frame with the specified non-shrink grout. The city inspector checked the fastener spacing against that NOA on-site and signed off the same day. The homeowner’s wind mitigation report now lists every opening as compliant.
That’s the standard we work to on every CGI service call in Plantation, whether it’s a full replacement or a single sash repair.
CGI Models & Products We Service in Plantation
We service the full CGI line that shows up in Plantation homes: the Estate Series, Classic Series, 9600 Series, and Sentinel Series. Most of the CGI windows and doors we see in Plantation are Estate Series impact units, since those are the ones spec’d most often for HVHZ compliance. We also service Classic Series non-impact units in homes where openings were replaced without a full impact upgrade.
For critical parts, weatherstripping, roll-form glazing beads, rollers, and NOA-specified fasteners, we use OEM CGI replacement parts. For non-structural trim and hardware, we’ll source quality aftermarket equivalents when OEM lead times would stretch a repair into weeks. We repair a mid-life CGI frame or sash when the extrusion and corner welds are sound. We recommend full replacement only when a repair wouldn’t restore the original NOA wind-load rating; that’s the honest line, and it protects your wind mitigation paperwork.
Our CGI sales & service work in Plantation covers hurricane impact windows, wind mitigation and code compliance, and full frame replacement.
CGI Service Pricing in Plantation
CGI repairs in Plantation run between $75 and $1,500 depending on what’s wrong. A straightforward sash adjustment or spring replacement sits at the low end. A full frame replacement on an impact-rated opening with new anchors, sealant, and disposal runs $1,500 to $3,500. The cost difference comes down to three factors: whether the unit is impact-rated, whether we’re pulling the full frame or working within the existing opening, and how much of the hardware needs replacing.
Every estimate is line-itemed on paper, and we register the manufacturer warranty before our truck leaves your driveway. Call (754) 238-2201 to schedule yours.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Plantation
It depends on the condition of the existing frame and the condition of the rough opening behind it. On Plantation’s CBS homes, an insert can work when the existing frame extrusion is still sound and the original anchoring meets the current NOA fastener schedule. But if the frame shows corrosion at the anchor points or the fasteners don’t match the NOA, a full-frame removal is the only way to restore the original wind-load rating. Call (754) 238-2201 and we’ll tell you which applies to your openings.
Plantation sits inside Broward County’s High Velocity Hurricane Zone, which requires every replacement window and door to carry a Miami-Dade Notice of Acceptance or an equivalent HVHZ product approval. A non-NOA unit installed here will fail framing inspection, get red-tagged, and likely void your wind mitigation discount on insurance. You’ll pay twice: once for the wrong window, once to fix it.
By following the NOA fastener schedule exactly. We pre-drill into the concrete block or poured concrete buck using the bit size and embedment depth listed in the product approval, then set the specified fasteners. The process is slower than drilling into wood, but it prevents spalling and cracking, which is what happens when someone hammers a lead anchor into a block cell. For exact pricing on your openings, call (754) 238-2201.
Most of the time, yes. Track pitting and roller seizure are the two most common CGI sliding door problems we fix in Plantation. We replace the rollers, dress or resurface the track where the extrusion is still sound, and the door runs clean again. The door only needs replacement when the track extrusion is so worn it can’t hold a new roller properly, or when the frame corner welds have failed. Call (754) 238-2201 for an assessment.
We pull the permit ourselves and schedule the inspection. Plantation’s building department checks the NOA fastener schedule at framing inspection, so we have the permit and the NOA chart ready before we start. You don’t handle paperwork. Call (754) 238-2201 to get started.
Service Areas Near Plantation
Our Plantation service area covers the city and the neighborhoods around it, including Acacia Villas, Anna Maria, and communities along the western Broward corridor. We also provide CGI service in Plant City for Polk County customers and CGI service in Polk City for homes along the I-4 corridor. If you’re nearby and own a CGI window or door, call us.
Book Your CGI Service in Plantation Today
If your CGI windows or doors are showing signs of wear, don’t wait for the next storm to find out what’s failed. Call TruePane Windows & Doors at (754) 238-2201 for a free estimate. We’ll inspect your openings, check the NOA compliance, and give you a line-item quote on paper. A live person answers the phone, 24 hours a day, 7 days a week.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation and Broward County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.