Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Port Richey, FL | TruePane Windows & Doors
We provide independent CGI windows and doors service across Port Richey, from canal-front properties off the Cotee River to the 1960s CBS ranchers inland, with dedicated Cgi repair in Tarpon Springs coverage available nearby. The work here is different than anywhere else in Pasco County because the salt air and tidal moisture punish CGI hardware in ways you will not see a few miles east. Call (754) 238-2201 and you will get a live person who can talk through what is actually wrong with your windows, not a script.
TruePane Windows & Doors has been setting and servicing CGI products in Florida for years, and we have learned the specific failure patterns that show up in Port Richey’s waterfront grid. We are an independent CGI sales & service provider. We are not manufacturer-affiliated and we are not an authorized CGI dealer. That independence matters when we tell you whether a part is worth replacing or the whole unit should go.
Why Port Richey Residents Choose Us for CGI Service
Dale Kessler, our owner, trained at Miami Dade College’s vocational program and has been reading rough openings and setting windows in South Florida for going on three decades. He still measures every job himself. That habit came from his father, who re-glazed storefronts along the Tamiami Trail when Dale was a kid in Kendall. The rule on the whiteboard in our shop is simple: if the pane is not true, the job is not done.
When you call us about a CGI window in Port Richey, you get a technician who has worked on these exact units in this exact climate. We know what a Classic Series sill looks like after three years of Gulf mist and Cotee River backflow. We know which hinges seize on which elevations. We carry CGI factory weatherstripping, rollers, and hardware, and for discontinued Classic Series balances and latches we use proven aftermarket replacements that meet or exceed the original wind-load spec. We do not patch what should be replaced, and we do not replace what can honestly be repaired.
Common CGI Windows & Doors Problems We Solve in Port Richey
- Pitting and white corrosion bloom on Classic Series aluminum sills. Homeowners often think it is a product defect. It is not. It is the Port Richey microclimate: salt mist off the Gulf and tidal evaporation from the Cotee River canals hitting aluminum in ways the factory never expected. We can tell you whether the frame is salvageable or the corrosion has gone too deep.
- Weep hole screens clogged with salt crystals and canal silt. North-facing windows on canal streets never get direct sun long enough to dry out. The sill channel holds standing water, then the salt crystallizes and blocks the weep holes completely. Water backs up, and the next storm drives it inside. We clear the channels, replace the screens, and adjust the sill slope where the original install allowed it to sag.
- Hinge pin seizure on Estate Series casements. On homes within a few hundred feet of the Cotee, east and west elevations both take salt air. The hinges on those casements bind because the omnidirectional exposure corrodes the pin surfaces faster than any lubricant can keep up. We replace the hinges with marine-grade hardware where CGI parts are no longer available for the older Estate units.
- Fuzzy weatherstripping stripping off single-hung sashes. This shows up most often where jalousie windows were replaced and the new CGI units were inset into the original CBS bucks. Those 1960s concrete block openings rack slightly with tide-driven soil movement, and the friction pulls the weatherstripping off the sash. We re-shim the opening, reset the sash, and install fresh CGI factory weatherstripping.
- Roller and track wear on sliding glass doors. Canal-front homes see salt in the air from two directions at once. Sliding door tracks take it hard. We replace rollers with OEM or better, and when the track itself is pitted beyond smooth operation we will tell you straight: a new CGI StormPro door is the honest fix, not another roller set.
CGI Service in Port Richey: What Local Conditions Mean for Your Equipment
Here is something specific about Cgi repair in New Port Richey and Port Richey that does not apply to any other city in Pasco County. The canal grid off the Cotee River is tight enough that Florida Building Code wind-borne debris compliance applies to all four elevations of the house, not just the windward sides. A failing east-facing window on a canal-front street is just as illegal as a west-facing one, because the tidal canal layout wraps north-south streets so densely that wind-driven debris can hit from any direction during a storm. That changes the repair-versus-replace math for CGI owners. If you are within a mile of the Gulf and the unit in question has cracked glazing, a bent frame, or a compromised sash, we recommend replacement rather than patching. The inspector is going to treat every elevation the same. So do we. Our techs map jalousie-to-CGI conversions along streets like Driftwood Drive and the surrounding canal grid regularly, using original CGI Classic, Estate, and Sentinel Series flashings for non-standard rough openings in 1960s-1980s concrete block homes. Measure it right the first time, or plan on coming back.
CGI Models & Products We Service in Port Richey
We service the full CGI lineup that is common in Port Richey homes: the Classic Series, Estate Series, Sentinel Series, and StormPro Series. That includes single-hungs, casements, fixed impact units, and sliding glass doors. Where the factory still makes the part, we use it. CGI factory weatherstripping, rollers, and hardware go into our service trucks for Port Richey calls. For discontinued Classic Series balances and latches, we install aftermarket replacements that hold the original wind-load spec or better. We stock common CGI weatherstripping profiles and standard roller sets locally so turnaround is fast. Non-standard parts take what they take, and we will tell you that upfront rather than promise something the supply chain cannot deliver.
CGI Service Pricing in Port Richey
What you will pay depends on the repair. A hinge replacement on a Sentinel Series casement runs $180 to $340 on most Port Richey calls. Full weatherstripping replacement on a single-hung sash is typically $90 to $175 per window. A complete CGI impact window replacement, depending on size and the condition of the existing CBS opening, can run anywhere from $900 to $2,800 per unit. What drives the cost in Port Richey specifically is the rough opening. Original 1960s CBS bucks are rarely square and rarely match modern standard unit sizes, so shimming and flashing take more time here than in a newer subdivision. You get a written, line-item quote before we start. No change orders after the fact. Call (754) 238-2201 for a free estimate, and we will tell you exactly what your CGI equipment needs.
Serving Port Richey, FL - Our Local Coverage Area
We’re based in the Port Richey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Port Richey
Some parts are still available from CGI, but not the full line. Balances and latches for the original Classic Series single-hungs have been discontinued. For those specific components we install aftermarket replacements that meet or exceed the original wind-load specification. Weatherstripping, rollers, and standard hardware are still available as factory parts, and those are what we use. If you are not sure what your window needs, call (754) 238-2201 and describe what is failing. We will tell you honestly whether a factory part is still available.
In most cases, yes. The jalousie openings in 1960s-1980s CBS ranchers are typically larger than the new CGI unit, so the job involves sleeving the rough opening with a custom buck, setting the CGI Sentinel or StormPro unit, and flashing the full perimeter. The concrete block structure stays intact. This is work we do regularly along the Cotee River canal grid. The inspection hurdle is the wind-borne debris compliance, and we have had these conversions pass the required post-install Miami-Dade certification on the first visit. Call (754) 238-2201 for a free estimate on your specific openings.
It is the salt air. Port Richey canal-front homes get it from two directions: Gulf breezes from the west and tidal mist rising off the canals below. The hinge pins on Sentinel Series casements corrode on both the east and west elevations because the exposure is omnidirectional. Within a few hundred feet of the Cotee, the corrosion cycle is fast enough that lubrication alone will not keep the hinges operating smoothly. We replace them with marine-grade hardware where available, or with CGI factory hinges when the unit is new enough. The fix is mechanical, not a spray can.
Yes. If the home is within one mile of the Gulf, Pasco County’s wind-borne debris region rules apply to any Port Richey Door Installation. The replacement door must be impact-rated and the installation must be documented for wind mitigation credit. The fact that the old door failed from salt corrosion does not change the compliance trigger. We register both manufacturer warranty layers and handle the paperwork as part of the install. Call (754) 238-2201 and we will walk you through what your specific property requires.
Look at the glass. If the unit carries an impact rating, the glass will have a permanent etch or label on the corner identifying the standard it meets. If you cannot find it, the unit predates the current Florida Building Code requirements and likely will not pass a wind-borne debris inspection for the Port Richey coastal zone. We can do a compliance check on-site and tell you exactly what passes and what does not. Call (754) 238-2201 to schedule a look.
Service Areas Near Port Richey
We also provide CGI service in the communities around Port Richey, including Port Richey service area neighborhoods, Anna Maria, Apollo Beach, and the surrounding Pasco County waterfront. If you are on the other side of the bay, we cover CGI service in Port St. Lucie and CGI service in Redington Beach as well.
Book Your CGI Service in Port Richey Today
If your CGI windows or doors are showing salt corrosion, seized hinges, or failing weatherstripping, call us at (754) 238-2201. A live person answers, 24 hours a day, seven days a week. We will schedule a free estimate, measure the opening properly, and give you a written quote before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Richey since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.