Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Windows & Doors in Palm Beach Shores, FL | TruePane Windows & Doors
We provide independent ES Windows service across Palm Beach Shores, from single-sash repairs to full-frame impact replacements. TruePane is not manufacturer-affiliated or authorized by ES Windows. What sets our crew apart here is simple: we’ve spent years core-drilling corroded ES anchors out of Singer Island concrete block, and we know which components fail first when salt hits from both the Atlantic and the Intracoastal at once. Call (754) 238-2201 for a free estimate on any ES Windows repair or replacement in Palm Beach Shores.
Why Palm Beach Shores Residents Choose Us for ES Windows Service
Most window crews in Palm Beach County can hang a window. Far fewer can tell you why an ES-8000 sliding door interlock rail pits out in three years on Inlet Road but lasts eight on the mainland. Dale Kessler, our owner, grew up in Kendall back when it was mostly nurseries and canal roads, and he trained at Miami Dade College’s vocational program learning to read a rough opening slowly and without guessing. That habit stuck. We’ve been measuring, sourcing, and setting windows in South Florida for going on three decades, and the work we’re best known for is impact-rated installation that passes inspection the first time. For Palm Beach Shores homeowners, that matters because the wind-load overlay south of Onondaga Avenue is stricter than anything else on Singer Island. We quote ES Windows repairs and replacements with that condition already baked in, not discovered halfway through the job.
Common ES Windows Windows & Doors Problems We Solve in Palm Beach Shores
- Salt-air pitting at the ES-8000 sliding door interlock rail. The Lake Worth Inlet wind funnel drives aerosolized salt into that seam faster than on mainland Singer Island homes. You’ll see white corrosion blooms along the rail and a door that starts to bind in the track. We replace the interlock with genuine ES OEM hardware and re-seal the perimeter joint with marine-grade polyurethane.
- Warped ES-7000 casement hinges on west-facing units. When afternoon Intracoastal wind-driven rain soaks the hinge, then direct Atlantic sun bakes it dry, the metal fatigues. Sash racking follows, then seal pop-out. Homeowners on the west side of Palm Beach Shores see this constantly. We true the sash, replace hinges with OEM parts, and reset the seal.
- Fogged ES-6000 fixed picture windows. Pre-Andrew single-pane lites in Palm Beach Shores fog within five to seven years because the original non-marine silicone perimeter seals break down from dual-body salt exposure. If you’ve got original ES-6000 units, we’ll tell you honestly whether a reglaze buys you time or whether full-frame replacement is the only square deal.
- Corroded ES-9000 anchor fins fused to concrete block. This is the big one in Palm Beach Shores. Original jalousie openings and early impact retrofits often have anchor fins so corroded they’ve become one piece with the block. A routine sash swap turns into core drilling. We do that work in-house, with stainless steel anchors and a perimeter joint that holds.
- Failed sealant joints at sill pans on east-facing facades. Unobstructed Atlantic sea breeze pushes wind-driven rain straight at east-facing windows year-round. When the sill pan flashing was originally set with standard silicone, it dries, cracks, and lets water behind the frame. We pull the trim, inspect the pan, and reset it with butyl and marine-grade product that exceeds ES’s original spec.
ES Windows Service in Palm Beach Shores: What Local Conditions Mean for Your Equipment
Palm Beach Shores is the only municipality on Singer Island whose building permits are reviewed under a local wind-load overlay that treats the Lake Worth Inlet as a Category D exposure line for all parcels south of Onondaga Avenue. That’s a stricter condition than the rest of the island, and it is not a paperwork detail. Category D exposure means open-water wind speeds hitting your windows with no terrain to slow them down. For an ES Windows owner, that translates to one hard rule: anchor fin spacing must be tighter than the minimum code requirement, and every perimeter joint needs secondary backer rod and sealant. We’ve had mainland crews quote ES-9000 impact casements for homes south of Onondaga using standard spacing, then fail the wind-load field check. Our crew cross-checks the Miami-Dade NOA requirements against original ES installation methods before quoting anything. We install flush-finish exterior trim here, exclusively, because recessed trim leaves a lip for wind-driven rain to catch. It’s the only trim that holds up under the inlet’s wind funnel, and we won’t put anything else on a Palm Beach Shores opening.
Measure it right the first time, or plan on coming back. That’s the rule Dale keeps on the whiteboard, and it’s written for this town.
ES Windows Models & Products We Service in Palm Beach Shores
Our crew works on the ES-7000 Series casement and awning windows, ES-8000 Series sliding glass doors, ES-6000 Series fixed and picture windows, and ES-9000 Series impact-rated casements. We use genuine ES Windows OEM hardware for structural catches, hinges, and interlock components, because aftermarket casting tolerances widen under this salt load and lead to premature lock failure. For sealants and backer rod, we spec commercial marine-grade polyurethane and butyl that exceed the manufacturer’s original spec. We stock the most common ES-8000 interlock components and ES-7000 hinge sets locally, so Palm Beach Shores homes don’t wait on a distributor shipment from Miami. When the aluminum wall thickness at the perimeter has thinned below 0.045 inch on an impact-rated opening, we recommend full-frame replacement over sash-retrofit, every time.
ES Windows Service Pricing in Palm Beach Shores
Window and door service in Palm Beach Shores runs higher than inland Palm Beach County for one reason: the dual-body salt exposure means more corrosion removal, more core drilling, and more marine-grade materials per opening. Here’s what you can expect:
- ES-7000 casement hinge replacement: $95-$160 per sash, depending on corrosion at the mounting points.
- ES-8000 sliding door interlock and track service: $180-$340, including marine-grade re-seal of the perimeter joint.
- ES-6000 reglaze with marine silicone: $120-$220 per lite, based on frame condition at removal.
- ES-9000 full-frame impact replacement on a concrete block opening: $1,100-$2,400 per opening, including core drilling and stainless anchors.
- Complete dump-and-replace on a 1960s CBS single-family: $9,500-$22,000, depending on opening count and existing anchor corrosion.
Every estimate is free, line-itemed on paper, and includes the permit scope and wind-load notes specific to your parcel. Call (754) 238-2201 and we’ll measure it right the first time.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Palm Beach Shores
No, but the installation does. The ES-9000 Series carries its own Miami-Dade NOA rating, and that rating does not change based on your address. What changes is the anchoring requirement. South of Onondaga Avenue, the local wind-load overlay treats the inlet as Category D exposure, which means our anchor spacing and perimeter sealing must be tighter than what a standard NOA install requires. We handle that in the permit drawings, not after the fact. Call (754) 238-2201 and we’ll walk you through what applies to your specific parcel.
Because the interlock rail on an ES-8000 sits directly in the path of the inlet wind funnel’s aerosolized salt spray. That salt crystallizes inside the lock mechanism and along the interlock seam far faster than it does six miles inland. In West Palm Beach, the same lock might go a decade without service. In Palm Beach Shores, we see binding within three to five years on east-facing elevations. The fix is genuine ES OEM hardware with a marine-grade protective coating at the strike point. For an exact quote on your door, call (754) 238-2201.
You need full-frame impact. Original ES-6000 units from the 1960s and 1970s were never designed to meet Florida’s post-Andrew impact glazing code, and a sash-only retrofit does not solve that. The frame itself also carries decades of salt-air corrosion where it meets the concrete block. We’ll core-drill the old anchors, set new stainless anchors, and install ES-9000 impact casements that pass inspection the first time. Call (754) 238-2201 for a free line-item estimate on every opening.
Because the west-facing units get the Intracoastal chop and afternoon thunderstorm rain, then bake in direct sun. That wet-dry cycle pops the seal on a repaired sash faster than the steady salt spray on the east side. If a tech reseals an ES-7000 with standard silicone, it will fog again within a season. We use marine-grade polyurethane at the glazing channel and replace the hinge set if there’s any racking. That holds. Call (754) 238-2201 and we’ll tell you what was used on the last repair.
They will, if the factory finish is intact and the perimeter sealant holds. The problem is that on direct-oceanfront units, the factory anodized finish gets micro-pitted by constant salt spray, and once moisture reaches bare aluminum, you’re chasing corrosion. We recommend an annual inspection and re-seal on oceanfront ES frames, and a marine-grade protective coating at the first sign of pitting. It’s cheaper than replacing frames. Call (754) 238-2201 to schedule an inspection.
Service Areas Near Palm Beach Shores
We serve Palm Beach Shores and the surrounding Singer Island and coastal communities, including Riviera Beach, North Palm Beach, Lake Park, and Juno Beach. If you’re south of us, we also cover ES Windows service in Palmetto and ES Windows service in Palmetto Bay. For the full picture of where we work, see our Palm Beach Shores service area page or learn more about our ES Windows sales & service expertise.
Book Your ES Windows Service in Palm Beach Shores Today
If your ES Windows are pitted, binding, fogging, or simply overdue for a marine-exposure inspection, call TruePane Windows & Doors at (754) 238-2201. We’ll send a background-checked, uniformed technician to measure every opening, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.