Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Miami Homeowners
A custom or geometric window is not a stock item you pull off a shelf. It is a measured, fabricated, and installed piece of glass that has to hold a specific shape through Miami heat, hurricane season, and decades of salt air. TruePane Windows & Doors has been setting custom and geometric windows since 2008 under Dale Kessler’s founding rule: if the pane is not true, the job is not done. We are a second-generation glazier’s company, not a franchise playbook, and we answer the phone live when you call (754) 238-2201.
Most custom window work in Miami comes down to one of four situations: you want impact-rated glass in a shape no big-box store carries, you have an arched or curved opening that needs a precise fit, you are replacing fogged or failed units in a home built before hurricane codes tightened, or you are opening up a wall and want glass that carries the room. We handle all of it, and we register both manufacturer warranty layers in writing before the truck leaves your driveway.
What Our Custom & Geometric Windows Service Includes
Custom Impact Windows
Custom impact windows are the single largest upgrade Miami homeowners make to older homes. Miami-Dade and Broward product approvals require specific impact ratings, and a window that does not carry the right approval will fail inspection or, worse, fail when a storm puts pressure on the glass. We fabricate custom impact units through authorized lines including PGT and CGI, sized to your exact rough opening, and we pull permits where the job requires them. If you live east of US-1 or in a coastal flood zone, this is not an optional conversation: it is the difference between a window that holds and a window that becomes a missile.
Geometric & Shaped Windows
Geometric and shaped windows are the triangles, trapezoids, pentagons, and angled glass that sit above front doors, fill gable ends, or finish a vaulted ceiling. These are the windows that make a Miami home feel custom, and they are also the windows most contractors measure once and hope. We measure every opening twice, every time, and we order shaped units with the manufacturer’s own fabrication tolerances rather than forcing a near-fit. When a geometric window is off by even a quarter inch, the reveal looks wrong and the seal carries stress it was never rated for.
Arched & Curved Windows
Arched and curved windows are the signature feature on many Miami Mediterranean and Art Deco homes, and they fail in predictable ways. The curved sash binds as wood swells in July humidity, the seal at the spring point gives out, and the glass fogs. We replace full arched units and curved transoms with the original radius measured on site, and we quote manufacturer lines side by side on paper so you see exactly what you are buying. A straight-line window guy will tell you an arch is close enough. It is not, and the binding door or fogged pane two summers later is the proof.
Oversized Openings
Oversized openings are the floor-to-ceiling glass walls, wide picture windows, and multi-panel sliders that turn a Miami living room toward the water or the yard. These are structural conversations: the header, the weight of laminated impact glass, the deflection limits, and the hardware rating all have to work together. We have set oversized openings from Coral Gables to Aventura, and every one of them got a written line-item quote before any deposit changed hands. If you are replacing an old fixed window with a large opening, we will tell you what is involved before we start, including any beam work or engineering your situation needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
TruePane is an authorized installer for PGT and CGI, which matters in Miami because both manufacturers build impact-rated custom shapes that carry Miami-Dade product approval. We have set hundreds of PGT WinGuard and CGI Sentinel units in custom configurations, and we know their lead times, their glazing options, and their warranty registration process cold. When we quote you a PGT or CGI shaped window, we register the warranty before we leave the driveway and we hand you the paperwork.
We also service and replace CWS windows in custom and geometric configurations. ViewLux custom shapes show up frequently in newer Miami builds, and CWS impact units appear in a lot of coastal condos and single-family homes from the early 2000s. Whether you have one of those brands or something else entirely, we can help. If the unit is serviceable, we service it. If it needs replacement, we quote you real options on paper.
Signs You Need Custom & Geometric Windows Right Now
- Fogged or hazy glass in a shaped window. The seal between the panes has failed and moisture is now inside the insulated glass unit. This will not clear up on its own, and in a geometric or arched window it means the curved sash or angled frame is carrying stress the seal was never meant to hold. You need a replacement unit measured to the exact shape.
- A window that binds, sticks, or will not close fully. In an arched or curved window, this is often the sash warping from Miami humidity against a frame that was never properly flashed. A window that cannot close and lock is a security and water-entry problem, not a nuisance. It will only get worse through hurricane season.
- Visible daylight or drafts around the frame. Custom and geometric windows have more perimeter joints than rectangular stock windows, and every joint is a failure point if it was not sealed correctly. If you can see light through the frame or feel air moving on a windy day, water is getting in too, and it is working on your framing.
- Cracks in the glass or the frame at the corners of a shaped unit. Geometric windows carry stress at the angles. A crack starting at a triangle point or an arch spring line means the unit is failing structurally, and the next storm puts real pressure on that weak point. Do not wait on this one.
- Windows that rattle during normal wind or traffic. Miami gets wind year-round, and a custom window that rattles is telling you the fit is loose or the hardware is wearing out. Loose glass in a shaped frame means the seal is working harder than it should, and seal failure follows.
Our Custom & Geometric Windows Process - Step by Step
- 1
Measure and inspect, on site. We come out and measure every opening twice, check the existing frame and flashing for rot or water damage, and look at how the window is set in the wall. For arched and curved units we take the radius and chord measurements on site, not from a photo. You cannot order a true arch from a guess.
- 2
Written line-item quote, side by side. We quote the job on paper with the manufacturer, the glass package, the impact rating if it applies, and the warranty terms stated. If you are comparing brands, we show you the differences in writing. The price on the quote is the price on the invoice.
- 3
Order and prep. We order custom units to the measured specifications and coordinate lead times with the manufacturer. For impact windows, we confirm the product approval applies to your opening size and application before the order is placed. You know the schedule before we start.
- 4
Install, seal, and flash. On install day our uniformed, background-checked technicians set the window, level it, shim it correctly, and seal and flash every joint. We work the way we would in our own mother’s house, which is the only standard that matters on a custom window.
- 5
Warranty registration and walkthrough. Before we leave, we register both manufacturer warranty layers in writing and hand you the paperwork. We walk the window with you, show you the operation, and answer whatever questions you have. The Done Right Promise applies to every job we finish.
How Much Does Custom & Geometric Windows Cost in Miami?
A custom geometric or shaped window in Miami typically runs $900 to $1,800 per window for a standard non-impact unit, depending on the shape complexity and glass package. Arched and curved windows run higher, typically $1,200 to $2,500 per unit, because the radius fabrication and curved sashwork are more involved. Custom impact windows are the top of the range: $1,400 to $3,200 per opening for Miami-Dade approved laminated glass in a custom shape, with oversized openings going above that based on size, structural requirements, and hardware.
What drives the price is the shape, the glass, and the structural work. A simple triangle transom is less than a full-radius arch. Laminated impact glass costs more than standard insulated glass but it is also the glass that keeps your home intact in a storm. Oversized openings may require header work or engineering, which adds cost and is not something you want a contractor to skip. The way to avoid overpaying is to get a written line-item quote that separates the window from the labor from any structural work, so you can see exactly what you are paying for. Our estimates are free, and the number on the quote is the number on the final invoice.
Custom & Geometric Windows Near Miami - Our Service Area
We serve Miami and the surrounding communities, from Aventura to Coral Gables and out toward the inland neighborhoods. Most custom and geometric window appointments in the Miami area are scheduled within a few business days, and our service area extends across the region. We also serve homeowners in Anna Maria, Acacia Villas, and Alafaya, along with surrounding areas. Call (754) 238-2201 and a live person answers, any hour.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Miami
A custom or geometric window is any window that is not a standard rectangular size or shape, including arches, circles, triangles, trapezoids, pentagons, and angled glass used in gable ends or above doors. These windows are built to your exact opening dimensions and angles rather than pulled from stock inventory. In Miami, they often carry impact-rated glass and Miami-Dade product approval. Call (754) 238-2201 for a free estimate on any shape.
Most single custom or geometric window installations are completed in one day once the unit is fabricated and on site. The fabrication lead time depends on the manufacturer and the shape complexity, typically two to six weeks for custom impact units. We give you a written schedule before we order anything. Call (754) 238-2201 to talk through your timeline.
A custom geometric or shaped window in Miami typically runs $900 to $1,800 for standard glass, with arched and curved windows at $1,200 to $2,500, and custom impact windows at $1,400 to $3,200 or more depending on size and structural work. The exact price depends on the shape, glass package, and any header or engineering work required. Estimates are free and written line by line. Call (754) 238-2201 for an exact quote.
Yes, TruePane is an authorized installer for PGT and CGI, and we regularly install custom impact windows from both manufacturers in Miami. We know their Miami-Dade product approvals, lead times, and warranty registration requirements. If you have a specific PGT or CGI window in mind, we will quote it on paper and register the warranty before we leave. Call (754) 238-2201.
We answer the phone live 24 hours a day, 7 days a week. If a custom window is cracked, leaking, or will not close, call (754) 238-2201 and a person picks up. Emergency board-up or temporary securing can be arranged, and a permanent replacement is scheduled as soon as the custom unit can be fabricated. You will not get a voicemail tree when you call us.
Every TruePane installation carries the Done Right Promise: if it is not done right, we make it right with no paperwork fights and no fine print. On top of that, the Keystone Standard means both manufacturer warranty layers are registered in writing before we leave the driveway, with durations stated. You leave with the paperwork in your hand. Call (754) 238-2201 for specifics on your window.
Clear a working path to the window and move furniture or wall hangings away from the area, because custom glass work needs room for ladders and proper staging. We protect the floor and the work area on every job. If you are replacing an impact window, know that the old unit comes out carefully and the framing gets checked before anything gets set. We will walk you through everything before we start, and call (754) 238-2201 with any questions ahead of install day.
Schedule Your Custom & Geometric Windows Service in Miami Today
Call (754) 238-2201 for a free, no-obligation estimate on your custom or geometric window. A live person answers, any hour, and we will schedule a measurement visit that fits your week. You get a written line-item quote, real manufacturer options side by side, and a company that has been setting glass in this community since 2008. Done right, in writing, on time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami since 2008 through a glazing tradition many years strong.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.