Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Lantana
Custom window and door work in Lantana almost always comes down to one thing: does the opening comply with Palm Beach County’s wind-borne debris code? A typical Lantana Window Replacement here runs $1,400 to $3,800 per opening depending on size, shape, and whether we need to re-buck the original concrete block rough opening. Most Lantana jobs take one to two days per opening once permits clear. Call (754) 238-2201 and we’ll send a technician to measure, quote, and walk you through exactly what your house needs.
We work in Lantana weekly. Our techs know the CBS homes off West Pine Street, the waterfront properties along North Lake Drive, and the older blocks east of Dixie Highway. That local familiarity matters when you are converting a 1962 jalousie opening into an impact-rated custom window.
Why TruePane Windows & Doors Is Lantana’s Preferred Custom Windows & Doors Company
Dale Kessler founded TruePane in 2008 on a rule that is still written on the whiteboard in our shop: if the pane is not true, the job is not done. We are a second-generation glazier operation, not a franchise buying leads. Lantana homeowners call us because we answer the phone with a live person at (754) 238-2201, 24 hours a day, seven days a week. No voicemail tree, no callback form.
Our Lantana customers keep our calendar full. They tell us the same things: the quote matched the bill, the crew showed up in uniform and on time, and the warranty paperwork was registered before the truck left the driveway. That is The Keystone Standard at work. Both manufacturer warranty layers get registered in writing, with durations stated, on every single job. If something is not done right, our Done Right Promise means we come back and fix it. No arguing, no paperwork fight.
Serving Lantana means understanding that a window job here is rarely just a window job. The original louvered jalousie frames in these 1950s and 60s CBS homes were cast into the block without a standard buck. That means masonry rework before the new unit goes in. A company that quotes Lantana Door Installation or window work without accounting for that is guessing, and you will pay for the guess later.
Our Custom Windows & Doors Services in Lantana
TruePane handles the full range of custom window and door work in Lantana, from odd-shaped replacements to full storefront systems. Here is what we do most often in this town.
Custom Shape Windows
Lantana’s mid-century homes and newer waterfront builds both use non-standard window shapes, from radius tops to angled trapezoids that follow rooflines. A custom shape window in Lantana typically runs $1,600 to $4,200 installed, depending on whether it is impact-rated and whether the rough opening needs masonry adjustment. We measure every opening twice, then order the unit from the manufacturer to the exact dimension and curve. No forcing a stock rectangle into a round hole.
Oversized Glass Panels
Fixed oversized panels are common on Lantana homes facing the Intracoastal, where owners want unobstructed water views without compromising the wind-load rating. Panels over 40 square feet require engineering review under Florida Building Code, and coastal Palm Beach County adds Impact Windows & Doors in Lantana requirements on top. We handle the permit drawings, the notice of acceptance documentation, and the install. Budget $2,800 to $7,500 for a true oversized impact panel in Lantana.
Architectural Grilles & SDLs
Simulated divided lites give a custom window the look of individual panes without sacrificing the thermal and impact performance of a single insulating glass unit. On Lantana’s older homes, homeowners often use SDLs to keep the original visual character while replacing failed jalousie or single-pane aluminum. Grilles add approximately $90 to $180 per window depending on profile and finish.
Commercial Storefront Glazing
Lantana’s commercial strips along Dixie Highway and Ocean Avenue hold storefronts that date back decades, and many still have unrated plate glass. Impact-rated storefront glazing keeps the insurance carrier happy and the space code-compliant. Our Custom Windows & Doors team handles storefront replacement after hours so businesses on West Pine Street and Ocean Avenue lose no operating time.
Curtain Wall Systems
Curtain wall is less common on Lantana’s residential side but shows up on mixed-use and commercial buildings near the Intracoastal. These are engineered systems, not off-the-shelf units. Every job gets drawings, load calculations, and manufacturer engineering review before we order material. If you own or manage a commercial building in Lantana, call (754) 238-2201 and ask for a site walk.
Trusted Brands We Service in Lantana
TruePane is an authorized installer for more than a dozen manufacturer lines, and we quote side by side on paper so you see exactly what you are buying. For Lantana specifically, we lean on PGT in Lantana and CGI for impact-rated products because both manufacturers build for Florida’s coastal wind zones and understand what salt air does to aluminum. Ply Gem rounds out our mid-range offering when a customer wants a solid custom window without the impact-glass price tag. We keep common hardware and weatherstripping in stock for Lantana service calls, which cuts turnaround time when a window needs urgent repair.
Common Custom Windows & Doors Problems We See in Lantana Homes
- Salt-air corrosion on aluminum frames and hardware. Lantana sits between the Intracoastal and the Atlantic, and the onshore breeze carries salt that attacks aluminum extrusions, steel fasteners, and sill pans far faster than you would see in Boynton Beach or Lake Worth. We regularly see 10-year-old frames that look 25 because they were never marine-grade.
- Jalousie rough openings cast without a buck. The original louvered windows in Lantana’s 1950s and 60s CBS homes were set directly into the block. Removing one and dropping in a modern unit without re-bucking the masonry leaves gaps that violate wind-load anchoring and leak during a tropical storm.
- Failed seals from non-marine-grade glazing. Constant heat, humidity, and salt exposure cause insulating glass seals to fail early on units not specced for coastal conditions. A fogged seal in Lantana usually means the unit was under-specified, not old.
- Missing notice of acceptance documentation. A window can be installed correctly and still fail an insurance claim after a storm if the impact-rating documentation was never filed. We see this too often: homeowner thinks they bought impact windows, but no NOA exists to prove it to the carrier.
Pricing for Custom Windows & Doors in Lantana, FL
Here is what Lantana homeowners should budget for common custom window and door work:
- Custom shape window, impact-rated: $1,600 to $4,200 per opening
- Oversized fixed glass panel (40+ sq ft): $2,800 to $7,500 installed
- Architectural grilles or SDLs, added per window: $90 to $180
- Jalousie-to-impact conversion with masonry re-buck: $2,200 to $5,000 per opening
- Commercial storefront glazing, impact-rated: $85 to $140 per square foot
What moves the number in Lantana is the condition of the rough opening. A clean replacement on a home that was already converted runs at the low end. A 1960s jalousie opening that needs the block cut back, patched, and re-bucked runs higher, and that masonry work is exactly what a cheap quote omits. We give written, line-item quotes with fixed pricing. The number on the quote is the number on the bill. Call (754) 238-2201 to schedule a free estimate.
We Also Serve Cities Near Lantana
TruePane covers Custom Windows & Doors in Lantana and the surrounding communities along the Palm Beach County coast. Our crews regularly work in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you live just outside the Lantana town limits, the same technicians, the same warranty registration, and the same upfront pricing apply.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Lantana
Lantana falls inside Palm Beach County’s wind-borne debris region, which means every replacement window and door must be impact-rated or protected by an approved secondary system. The specific design pressure rating depends on the structure’s exposure category, but any compliant quote for Lantana will specify the unit’s DP rating and include the manufacturer’s notice of acceptance. If a quote does not list a DP rating and NOA number, it is not a compliant quote. Call (754) 238-2201 and we’ll explain what your specific home needs.
Usually not. The original jalousie frames in Lantana’s CBS homes were cast directly into the block without a standard buck, so the rough opening is the wrong size and shape for a modern impact unit. Our crews grind back the masonry, patch the opening, and re-buck it to accept the new window properly. Skipping that step leaves gaps that fail wind-load anchoring and leak during the first hard storm. We include the re-buck work in every jalousie conversion quote because it is not optional.
Properly documented impact-rated windows and doors are the single biggest window-related factor an insurance carrier considers when pricing a Lantana policy. The documentation that matters is the notice of acceptance for the specific product, matched to your address and installation date. We register both warranty layers and provide the compliance paperwork before the truck leaves the driveway, so when your carrier asks for proof, you have it. Homeowners who skipped documentation often pay the same premium as an unprotected home.
Salt. Lantana’s entire footprint sits between the Intracoastal Waterway and the Atlantic, and the onshore wind carries airborne salt that attacks aluminum extrusions, steel fasteners, and sill pans continuously. Marine-grade aluminum and stainless hardware slow the deterioration dramatically, but standard residential hardware corrodes within a decade. When we quote Lantana work, we spec hardware rated for coastal exposure and write it into the line items so you can see it.
PGT and CGI impact-rated units with marine-grade hardware, stainless fasteners, and low-E insulated glass are the most common spec we write for Lantana homes. Both manufacturers build specifically for Florida coastal wind zones and back their products with written warranty terms we register on your behalf. Architectural grilles and SDLs can be added without compromising either the impact rating or the salt-air performance, and we quote those as a line item on the same sheet so there is no confusion about what you are buying.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lantana with custom window and door work since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After