Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Oakland Park, FL | TruePane Windows & Doors
We provide independent CGI windows and our Door Installation in Oakland Park service across Oakland Park, FL. We’re not manufacturer-affiliated, and we’re not authorized by CGI. What we are is a local team that has rebuilt and serviced CGI window and door systems across Oakland Park’s HVHZ retrofit market for over a decade. The one thing that makes our CGI work here different: we understand what a 1960s CBS jalousie home requires before a single impact window gets set. Call (754) 238-2201 for a free estimate.
Why Oakland Park Residents Choose Us for CGI Service
CGI windows and doors are built for Miami-Dade’s wind-load reality, and Oakland Park sits squarely in that corridor. The product is good. The install is where most failures start. Dale Kessler grew up in Kendall watching his father re-glaze storefronts along the Tamiami Trail, and he has been measuring, sourcing, and setting windows and doors in South Florida for going on three decades. He trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray, slowly and without guessing. That upbringing is why our techs measure every opening twice, and why we register both warranty layers in writing before the truck leaves the driveway. An independent CGI service shop either respects the rough opening or it doesn’t. We do.
Common CGI Windows & Doors Problems We Solve in Oakland Park
- Rack and frame distortion on older Estate Series sliding doors. Full-wall openings on 1960s CBS homes take the brunt of HVHZ wind-load cycling. Over time, the frame distorts, the sash binds, and homeowners think the whole door needs replacing. Sometimes it does. Sometimes a re-shim and roller replacement brings it back. We tell you which one applies before we touch a screwdriver.
- Corrosion pitting on aluminum frames and hardware. Oakland Park sits a few miles inland from the Atlantic, and salt-laden air corrodes aluminum faster than most homeowners expect. We see pitting on CGI frame corners and hardware that looks like frost damage. If the frame is still sound, we treat it. If it’s structurally compromised, we say so.
- Jalousie-to-impact retrofit failures. The original jalousie window banks in these 1950s and 1960s CBS homes cannot be brought into HVHZ compliance with any retrofit kit. When a previous contractor tries anyway, the seals fail and the flashing leaks. We rebuild the rough opening properly before a CGI unit goes in.
- Weatherstripping degradation on Classic Series single-hungs. Year-round humidity and wind-driven rain break down weatherstripping faster in Oakland Park than in inland Florida. A single-hung that won’t seal is an air leak and a water leak. We stock replacement weatherstripping and keep weep systems clear as part of every service call.
- Weeping system clogs from wind-driven rain. Weep holes and covers on CGI impact windows are not decorative. When they clog with salt film, dust, or stucco debris, water builds up in the track and finds its way inside. We clear them, and we check them every time we’re on site.
CGI Service in Oakland Park: What Local Conditions Mean for Your Equipment
Oakland Park built out heavily between the 1950s and 1970s, and the result is a dense inventory of single-story CBS ranch homes, most with original metal-framed jalousie louvers or non-impact aluminum sliders that predate any hurricane glazing requirement. The jalousie configuration is the defining issue here. On a 1963 CBS ranch off NE 38th Street, we removed a full-wall jalousie bank and rebuilt the rough opening with proper header and buck framing before our Window Installation in Oakland Park set a CGI Estate Series impact picture window and matching casements. Our crew re-stuccoed the exterior to blend the new frame line, and the job passed first-cycle city inspection. That scope, full rough-opening reconstruction plus stucco repair, is routine work in Oakland Park and almost unheard of in neighboring newer-suburb cities like Coral Springs or Tamarac, where homes were framed for modern window units from the start. If you own a CGI-equipped home here, or you’re planning to swap out jalousies for CGI impact windows, you need a service provider who knows what lives behind those walls before the first cut.
CGI Models & Products We Service in Oakland Park
Our techs work on the full CGI Estate Series line: impact windows, fixed and picture windows, and sliding glass doors. We also service the Classic Series single-hung line, which shows up regularly in Oakland Park homes that were updated in the 1990s and early 2000s. Our approach to parts is straightforward: genuine CGI replacement parts where available, hinges, rollers, weatherstripping, weep covers, and quality aftermarket hardware only when it matches the original design pressure and corrosion profile. We stock the common wear items for Oakland Park service calls, so most repairs are done in one visit.
CGI Service Pricing in Oakland Park
CGI service pricing in Oakland Park depends on what we find when we open the unit. A hardware swap on a Classic Series single-hung runs differently than a racked Estate Series slider that needs re-shimming and roller replacement. A full-unit replacement, especially on a jalousie retrofit requiring rough-opening reconstruction, carries framing and stucco scope that a parts-only repair never will. Our free estimate includes a written line-item quote with both manufacturer warranty layers stated, so you see exactly what you’re buying before you sign anything. We offer a permanent 5% discount for seniors and veterans. Call (754) 238-2201 to schedule a free estimate.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Oakland Park
No. Original jalousie window banks in Oakland Park’s 1950s and 1960s CBS homes cannot be brought into HVHZ compliance with any retrofit kit. The rough opening must be completely reconstructed with proper header and buck framing before an approved CGI impact unit can be set. Anyone who tells you otherwise is about to void your warranty and leave you with a leaking opening.
Yes. Oakland Park sits within Broward County’s High-Velocity Hurricane Zone, and every replacement window and door must carry a Miami-Dade NOA or HVHZ Florida Product Approval. We verify the product approval on every CGI unit we install and register both warranty layers in writing before the truck leaves the driveway. Call (754) 238-2201 to confirm your unit qualifies.
That’s wind-load cycling working against the frame. Full-wall openings on Oakland Park’s CBS homes flex under HVHZ pressure, and over time the frame distorts enough that the sash binds. Sometimes a re-shim and roller replacement solves it. Sometimes the frame has moved too far and the unit needs replacing. We’ll tell you which one it is during the free estimate.
Yes. When we rebuild a rough opening for a CGI impact window on an older Oakland Park home, the exterior stucco gets patched and textured to blend with the existing wall. We’ve done this on full-wall jalousie conversions where the new frame line runs eight or ten feet. Matching 50-year-old stucco texture takes patience, but it’s part of the job.
Yes, and it needs to stay clear. Oakland Park’s wind-driven rain and salt-laden air clog weep holes and covers faster than most homeowners expect, and a blocked weep system puts water in the track and eventually inside the wall. We clear and check weep systems on every service call. If your covers are missing or damaged, we replace them with genuine CGI parts. Call (754) 238-2201 for a free estimate.
Service Areas Near Oakland Park
We provide CGI sales & service throughout Oakland Park and the surrounding communities. Our Oakland Park service area covers the city proper, including the CBS ranch neighborhoods near NE 38th Street. We also serve CGI service in Ocean Breeze and CGI service in Ocean Ridge for coastal homeowners dealing with salt-corrosion and HVHZ compliance.
Book Your CGI Service in Oakland Park Today
If your CGI windows or doors need service in Oakland Park, call (754) 238-2201. We’ll send a background-checked, uniformed technician to measure, diagnose, and quote your job in writing. A live person answers the phone 24 hours a day, 7 days a week. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Oakland Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.