Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Palm Beach Shores, FL | TruePane Windows & Doors
We service and repair CGI windows and doors throughout Palm Beach Shores as an independent provider, not a manufacturer arm. What makes our CGI work different here is simple: our crews are on Singer Island several times a week tracking how the brand’s Miami-Dade NOA-rated frames, sills, and hardware hold up under constant dual salt-air exposure from the Atlantic and Lake Worth Lagoon. That’s the kind of field knowledge you can’t get from a catalog. Call (754) 238-2201 to schedule a free estimate.
Why Palm Beach Shores Residents Choose Us for CGI Service
We’ve been measuring, sourcing, and setting windows and doors in South Florida for going on three decades, and CGI work in Palm Beach Shores is its own discipline. Dale Kessler grew up in Kendall, back when that part of Miami-Dade was still mostly nurseries and canal roads, and he learned early that an impact-rated installation either passes inspection the first time or it doesn’t. The crews we send out here carry genuine CGI hardware, gaskets, and weatherstripping because aftermarket weatherstripping rarely holds up to the dual-mouth salt load this town throws at every opening. We’re an independent CGI sales & service shop, which means we can tell you straight when a repair will hold and when a full replacement is the only honest answer.
Every technician who works in Palm Beach Shores is background-checked, uniformed, and trained for Palm Beach Shores Window Installation projects, including core-drilling corroded anchor fins out of mid-century concrete block without tearing up the rough opening. That’s a skill you earn by doing it, not by reading a manual. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and the Done Right Promise applies to every job.
Common CGI Windows & Doors Problems We Solve in Palm Beach Shores
- Pitting and white corrosion bloom on raw aluminum frames. Palm Beach Shores homes sit between two salt sources, and CGI aluminum shows it faster here than a mile inland. We clean, treat, and reseal frames before they reach the point where pitting eats into the structural web.
- Compression gasket and weatherstripping failure. East-facing elevations take Atlantic sea breezes head-on, and once the gasket compresses out, wind-driven rain rides the sash right into the room. We replace gaskets with genuine CGI material and check the sill-pan flashing while we’re in there.
- Roller and track seizure on sliding windows and doors. Salt crystallization builds up in the lower track channel, and pretty soon the door won’t move. We strip the track, replace the rollers with OEM hardware, and the door slides like it should.
- Premature seal failure and fogging in the insulated glass unit. The thermal and salt-humidity cycling on Singer Island is rough on IGU seals. When the glass goes gray, we source the correct CGI replacement unit and set it square.
- Fused anchor fins in mid-century concrete block. Homes built before Hurricane Andrew often have original aluminum fins bonded to the rough opening. We core-drill anchor points and set stainless steel wedge anchors so the new frame sits true.
CGI Service in Palm Beach Shores: What Local Conditions Mean for Your Equipment
Palm Beach Shores is one of the only municipalities in Florida where the Lake Worth Inlet focuses wind gusts directly across the town’s narrowest point. The channel acts like a wind funnel, and during tropical systems or even routine cold-front passages, those gusts hit both the ocean and lagoon faces at full coastal intensity. That means CGI impact windows installed here are field-tested against wind-driven rain in ways no inland city replicates. East-facing units absorb unobstructed Atlantic sea breeze, while west-facing windows and doors face salt-laden Intracoastal chop and afternoon thunderstorm rain, which is why Palm Beach Shores Door Installation requires specialized inlet-side expertise. Our crews spec anchor fins at tighter spacing than minimum code and apply secondary backer-rod and sealant at every perimeter joint. Mainland crews unfamiliar with inlet-side exposure regularly underestimate this. On Inlet Road, our techs pulled two corroded CGI Estate Series awning windows from a 1966 concrete block bungalow where the western sill faces Lake Worth Lagoon. The lower sash pins had seized solid from salt crystallization, and the original aluminum fins were so bonded to the concrete jambs we core-drilled all twelve anchor points and set stainless steel wedge anchors before flashing the opening with a two-piece sill pan and dual backer rod plus marine sealant. The same windows on the east side needed only hinge replacement and a gasket refresh. That’s the difference between guessing and knowing.
CGI Models & Products We Service in Palm Beach Shores
We work on the full CGI line. The Estate Series, Classic Series, Sentinel Series, and Targa Series all show up in Palm Beach Shores condos and single-family homes, and each has its own failure points in this climate. Estate and Classic frames are the ones we most often see with salt-driven pitting and seized hardware near the Inlet. Sentinel and Targa units, common on newer oceanfront condos, tend to come in for gasket and roller work. Our trucks keep genuine CGI hardware, gaskets, and weatherstripping stocked for same-week turnaround. When a part is no longer available from CGI, we tell you before ordering anything aftermarket, and we explain what the trade-off means. We repair whenever the frame is sound and the glass is intact. Full replacement is the recommendation only when aluminum pitting has compromised the structural web or when an insert cannot be flashed to the NOA requirements of the Wind-Borne Debris Region.
CGI Service Pricing in Palm Beach Shores
| Service | Typical Range |
|---|---|
| Track cleaning and roller replacement | $120-$260 per door |
| Compression gasket and weatherstripping replacement | $90-$220 per window |
| IGU seal failure / glass replacement | $280-$700 per unit |
| Full frame replacement, standard opening | $900-$1,900 per opening |
What drives the cost in Palm Beach Shores is the condition of the rough opening. If the old anchor fins are fused to concrete block, that means core drilling and stainless wedge anchors, and that’s labor hours you can’t skip. If the frame is clean and the sash is square, a gasket job is quick money. Our estimates are free and we write them line by line, on paper, so you see exactly what you’re paying for. The Done Right Promise covers the workmanship. Call (754) 238-2201 for an exact quote.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Palm Beach Shores
Yes. Palm Beach County’s Wind-Borne Debris Region requirements apply at full coastal intensity here, and an insert replaced without proper NOA documentation will fail inspection and can void your insurance coverage. We verify NOA compliance on every CGI job before we touch the rough opening. Call (754) 238-2201 to have your existing frames checked.
Faster than you’d think. Dual salt-air exposure from the Atlantic and Lake Worth Lagoon means a raw CGI aluminum frame that would look fine for twenty years in Wellington can show white corrosion bloom and pitting in eight to ten here. Regular cleaning and marine sealant treatment every two to three years is the practical answer.
Yes. Core drilling preserves the block and gives us clean anchor points for stainless steel wedge anchors set at tighter spacing than minimum code. We’ve done this on 1960s concrete block bungalows all over Palm Beach Shores, including homes on Inlet Road, and the wall stays intact. Measure it right the first time, or plan on coming back.
Sentinel Series frames tend to handle direct Atlantic exposure better than the older Classic and Estate models because the frame profile and finish are built for high-salt environments. But the gaskets and rollers still need maintenance, and we replace those with genuine CGI parts to keep the warranty intact. Call (754) 238-2201 if you’re seeing pitting or hearing the whistle.
West-facing doors in Palm Beach Shores sit in the direct path of afternoon Intracoastal chop and thunderstorm wind-driven rain. The whistle is almost always a compression gasket that’s already compressed out or a sill-pan flashing gap that lets air sneak past the sash. We find the gap, replace the gasket, and reseal the perimeter. Estimates are free, so call (754) 238-2201 and we’ll take a look.
Service Areas Near Palm Beach Shores
We work throughout Palm Beach Shores and the surrounding coastal communities, including Palm Beach Shores service area coverage, the inlet-adjacent streets off Inlet Road, and nearby cities like Acacia Villas and Anna Maria. Our crews also handle CGI service in Palmetto and CGI service in Palmetto Bay for homeowners who need the same marine-salt expertise on their side of the water.
Book Your CGI Service in Palm Beach Shores Today
If your CGI windows or doors are corroding, seizing, or letting wind-driven rain through, call (754) 238-2201 today. We’ll schedule a free estimate, measure every opening twice, and give you a line-item quote on paper. We’ve been standing behind our work in South Florida since 2008, and we’ll be here when you need us.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores and the surrounding coastal communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.